EDIFIER TWS200 Pro True Wireless Stereo Earbuds User Guide

June 5, 2024
Edifier

EDIFIER TWS200 Pro True Wireless Stereo Earbuds

Product Description and Accessories

EDIFIER-TWS200-Pro-True-Wireless
Stereo-Earbuds-FIG-1

Note: Images are for illustrative purposes only and may differ from the actual product.

User Guide

Charge the earbuds

  • You may hear a warning tone when at a low battery level, please place the earbuds in the case for charging.

Charge the Charging CaseEDIFIER-TWS200-Pro-True-Wireless Stereo-Earbuds-
FIG-3

  • If the power indicator flashes six times rapidly
  • when the case is opened, it indicates the case has a low battery capacity, please charge it in time.
  • Charging time: approx. 2 hours for full charging.
  • Power indicator steady lit = charging
  • Power indicator off = fully charged
  • Power indicator (near the charging port)
    • Rated input: 5V 35mA(earbuds)
    • 5V 1A(charging case)

Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries in a fire to prevent an explosion.EDIFIER-TWS200-Pro-True-Wireless Stereo-
Earbuds-FIG-4

  • Power on once the case is opened.
  • Power off once the case is closed.

PairingEDIFIER-TWS200-Pro-True-Wireless Stereo-Earbuds-
FIG-5

  • Place earbuds in the case, and double click the pairing button to enter Bluetooth pairing
  • Place earbuds in the case, and press and hold the pairing button for approx. 8 seconds to enter TWS pairing mode and clear the pairing list.
  • Bluetooth pairing: red and white lights flashes
  • TWS pairing: white light flashes rapidlyEDIFIER-TWS200-Pro-True-Wireless Stereo-Earbuds-FIG-6

Please search for and connect to either “EDIFIER TWS200 Pro”, after pairing is successful, the white light will flash twice every 5 seconds.

Functional Operation

  • Accept/end a call: double click the left or right earbud
  • Pause/Play: double click the left or right earbud
  • Previous track: triple click the left earbud
  • Next track: triple-click the right earbud

Power indicator of the charging case

  • When the charging case is opened/closed, the power indicator will show the case’s battery level.
  • If the battery level is 100%-80%, the indicator flashes 3 times slowly;
  • If the battery level is 80%-40%, the indicator flashes twice slowly;
  • If the battery level is 40%-10%, the indicator flashes once slowly;
  • If the battery level is less than 10%, the indicator flashes 6 times rapidly.

FAQs

When charging the charging case, the indicator is off

• Please ensure the charging case is correctly connected with the power source.

No sound

  • Check if the earbuds are operating.
  • Check if the earbud’s volume are at an appropriate level.
  • Check if the earbuds are correctly connected to a mobile phone.
  • Check if the earbuds are operating within a normal working range.

The call quality of the earbuds is not good

  • Check if the mobile phone is in an area with a strong signal.
  • Please ensure the earbuds are within an effective distance (10m) and no obstacles between the earbuds and mobile phones.

When playing music, cannot control pause/play/previous track/next track via the earbuds

  • Please ensure the paired device support AVRCP (Audio Video Remote Control Profile) profile.

Maintenance

  • Do not use fast charger to charge the product to avoid affecting the batteries’ service life.
  • If not used for long periods of time, please charge the product with a lithium battery at least once per three months.
  • Keep the product away from humid places to avoid affecting the internal circuit. Do not use the product during intense exercise or with muchsweat to prevent sweat from dropping into the product to make damage.
  • Do not put the product in places exposed to the sun or with high temperatures. The high temperature will shorten the service life of electronic components, damage batteries, and make plastic components deformed.
  • Do not put the product in cold places to avoid damaging the internal circuit board.
  • Do not dismantle the product. Non-professional personnel may damage the product.
  • Do not drop, strongly vibrate, or strike the product with a hard object to avoid damaging internal circuit.
  • Do not use drastic chemicals or cleaner to clean the product.
  • Do not use sharp objects to scratch the product surface to avoid damaging the shell and affecting facade.
  • “To prevent possible hearing damage, do not listen at high volume levels for long periods.”
  • “Fully understand user manual before use.”
  • “Ensure your player at low volume levels or power off before you leave.”

Disposal

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household disposals, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

WARNING

  • The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
  • A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
  • Never disassemble, hit with force, squeeze batteries or dispose of batteries in fire.
  • Do not expose batteries in conductive materials, liquid, fire, or heat.
  • Do not let metal objects contact two battery poles. If the battery looks swollen, leaking, discolored, has an odor or any abnormal appearance, stop using it.
  • Do not use the battery after being immersed in water.
  • Improper use of battery may lead to explosion or leakage, causing skin burn or other injuries; in the event of battery leakage, handle it with care and immediately dispose of the battery in a manner in compliance with applicable laws and regulations in your locality.
  • The battery is subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  • Please read the manual carefully. Keep it in a safe place for future reference.
  • • Use the product properly by following the instructions in the manual.
  • Using the product in a 0-35°C environment is recommended.
  • Supervise children under 14 when using the product, the product is not a toy.
  • To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
  • Do not use the product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).
  • Consult local staff before using the product near medical or industrial equipment or on board an aircraft.
  • Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to
  • clean the product surface. Use only neutral solvent or clear water for cleaning.
  • To prevent possible hearing damage, do not listen at high volume level for long periods. Therefore, always set the volume to an appropriate level.
  • For traffic safety, do not use the product while driving, cycling or crossing a road.

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Other trademarks and trade names are those of their respective owners.

  • Playback time: approx. 6 hours (earbuds) + 18 hours (charging case)
  • Earbudsx2 Charging casex1 Charging cablex1 Storage bagx1 User manualx1
  • Please ensure the paired mobile phone support Qualcomm® aptX™ Adaptive decoding.

CAUTION

  1. Use for extended periods at a high volume may affect your hearing capacity. Use product responsibly.
  2. Playback time and charging time may vary, depending on surroundings, volume level, and audio sources.
  3. Images are for illustrative purposes only and may differ from the actual product.

Declaration for EU

  • Frequency Band: 2.402GHz ~ 2.480GHz
  • RF Power Output: 20 dBm (EIRP)
  • There is no restriction of use.
    • Rated input: 5V 35mA(Earbuds)
    • 5V 1A(Charging case)

Qualcomm aptX

  • Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
  • Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
  • aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

Edifier International Limited

  • P.O. Box 6264
  • General Post Office
  • Hong Kong
  • www.edifier.com
  • 2020 Edifier International Limited. All rights reserved.
  • Printed in China

NOTICE

For the need of technical improvement and system upgrade,] information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. The pictures and illustrations shown on this manual may be slightly different from the actual product. Images are for illustrative purposes only and may differ from the actual product.

FCC Regulatory Compliance

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance

  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISED Regulatory compliance

This device contains license-exempt transmitters that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  • This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.
  • This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals