GE Lighting 13239L Imagine Smart LED Downlight User Guide

GE Lighting 13239L Imagine Smart LED Downlight User Guide

Seamless Setup

1. Plug in your Google Nest device ( smart speaker )

2. In the same room, turn on the light.

The light will start blinking and waiting to be added in Google Home App Installation by a licensed electrician is required

3. Download the Google Home App and follow the prompts to easily set up
   

4. Set up smart light
   

5. Pick smart light to set up
   

6. Select smart light and tap Set up
   

7. Choose room and tap Next
   

8. Create a unique name and tap Next
   

9. Your Light is now ready and tap Done
   

Now your light and room is on App and ready to be controlled

Control your light, power On & Off, dim your light Down & Up

change colors

Control your lights with your voice

• Support your circadian rhythm sleep / wake cycle

• Set up Routines for your lights

• Control your lights with your voice

• Create ambience in your home
  

“Hey Google, turn on the light”

Explore Google Home App with Routines

Routines

Troubleshooting

Problem : If there’s no blinking from light after powering on.

Solution: Please follow below Factory Reset process.

Turn power On & Off, 5 times with 2 second intervals ( in between switching ) each time using light switch.

1. On & Off (wait for 2 seconds )
2. On & Off (wait for 2 seconds )
3. On & Off (wait for 2 seconds )
4. On & Off (wait for 2 seconds )
5. On & Off (wait for 2 seconds )
6. On & light should now start to blink

light should now start to blink.

After performing the above On & Off cycle, if light does not blink, please redo the the above On & Off cycle ( factory reset ) again.

Confirm the light blinks and go to Step 4

** Problem: Problem: The light can be added successfully, but cannot be controlled.**

Solution: Please follow below to reboot the Google Home.

Tap the in the top right corner of the page.

At the top right, tap More   Reboot

imagine

connected smart home

This GE imagine connected smart home downlight features and controls are performed via the App or Voice only.

 Brightness or dimming controls can only be performed via the App or Voice as outlined in the quick start guide supplied with your downlight. Note: This smart downlight is not compatible with the use of any external dimmer.

Use in Dry Locations only

Australian / New Zealand Regulatory Compliance Mark and Responsible supplier number E6

GE is a trademark of General Electric Company and is under license by Light Source Solutions and Light Source Solutions New Zealand Ltd. of 140 Fulton Drive Detriment Vic 3026 Australia.

Thank you
for choosing GE imagine.
Enjoy your new smart lighting experience

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>