BORMANN TOOLS BTce200 Tile cutting machine User Manual
- June 5, 2024
- BORMANN TOOLS
Table of Contents
BORMANN TOOLS BTce200 Tile cutting machine
Operating Instructions
- Before operating, use the adjusting screw to adjust the height of the handle and set it to an ideal position in order to cut the tile easily (Figure 1).
- Press down the locating screw to zero graduation line, make it overlap with the pointer of swivel. Then tighten the clamp handle, and set the scale-plate and the pressure line in such way so they overlap (Figure 2) with each other.
- Press down the locating screw to make it locate in any degrees from 0 to 45°. Then tighten the clamp handle (Figure 3).
- After these adjustments, lift the handle, place the cutting wheel on the tile, and cut the tile slowly (Figure 4).
- After cutting, put the handle near the end face of the tile, then push it downwards, forcing the tile to break (Figure 5).
- While cutting the tile, the outspread bracket can be unfolded to help you operate the tool with more ease (Figure 6).
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Read User Manual Online (PDF format)
Loading......