UHPPOTE HBK-RW02W WiFi Remote Control User Manual

UHPPOTE HBK-RW02W WiFi Remote Control

PRECAUTION

For the avoidance of damage to the product or injury to the people, please carefully read this manual before use and keep it for future reference.

WARNINGS

• For the avoidance of damage to the product, do not expose the product to rain or damp.
• This product could be used outdoors.
• Please use a combination of transmitter and receiver provided by us, we can’t guarantee our transmitter or receiver is fully compatible with other manufacture’s products.
• The product installation shall be conducted by a professional electrician as it requires specialized knowledge. Incorrect operation may damage the product, or make it inoperable.
• The transmitter and receiver have been paired with each other in factory.
• Keep this product away from children under 3 year old to prevent ingestion.
• Install the receiver in a place out of touch of children, so as to prevent electric shock.
• Please do not put the battery in water, fire or moisture places for avoidance of explosion.
• The battery contains hazardous substance. Return the waste batteries to the recycling bin to avoid contamination to the environment.

MAIN FEATURES

• Specialized for the access control lock and unable to be applied to access control keypad and other fields.
• The waterproof degree is IP65, that is, ensure the device will be protected against entry of dust and splashes of the water.
• With an external antenna, the reception of the signal is much better.
• Built-in buzzer, it will make sound to remind people when the door is open or closed.
• Built-in ITEAD PSF-B WIFI module certified by the FCC and the FCC ID is 2AE2JPSF-B85.
• It enables you to remotely control the connected appliances via free eWeLink APP. You can download the iOS version in APP Store or Android version in Google Play.

SPECIFICATIONS

WIFI Remote Control

Operating Voltage| 12VDC| RF Frequency| 433.92MHz
Operating Current| 20mA| Operating Temperature| -30~75℃
RF Channel| One| Receiving Range| 50 meters (Open space)
WiFi Standard| 2412-2462MHz| Operating Mode| Momentary/Toggle/Latched
Waterproof Rating| IP65| DC Encoding Type| Learning code
WiFi Module Model| ITEAD PSF-B| WiFi Modulation Type| OFDM/DSSS
Number of Remotes that can be connected to one Receiver| 40
Remote Transmitter
Operating Current| 10mA| Case Material| PC+ABS
Frequency| 433.92MHz| Operating Voltage| 6VDC (Built-in button battery)
Transmit Power| 15mW| Powered By| 2pcs CR2016 3V batteries
Modulation Type| ASK| Antenna Gain| 3.6dBi

MAIN COMPONENTS

WIRING DIAGRAM

OPERATING SETTINGS

Transmitter Pairing
Press the RF-KEY on the remote receiver once, the indicator on it will flash green quickly. Then press the button on the remote transmitter within 20 seconds, the LED indicator on the receiver will flash green three times to indicate the paring is successful.

Working Mode Setting

The LED indicator on the rece- iver will flash green and the green light flashes the same number of times as the RF-KEY is pressed.

The buzzer will beep once.

Toggle| Press the RF-KEY three times
Latched| Press the RF-KEY four times
Momentary with a 5-second delay| Press the RF-KEY five times
Momentary with a 10-second delay| Press the RF-KEY six times

RF Unpairing
Press and hold the RF-KRY for 8 seconds until the indicator changes from green to red.

PACKING LIST

eWeLink APP OPERATION GUIDE

Download eWeLink APP
Search “eWeLink” in APP Store for iOS version or Google Play for Android version.

Registration and Login
Select your country/region code and click “Next”, and then input a valid email address and click “Verification Code”. After a while you will receive a verification code. Fill in the verification code and password, confirm password and submit. For safety, the password should be no less than 8 characters .

WiFi Pairing

1. Power up the remote control receiver with 12VDC power.
2. Click the “+” device icon or “Add” on the home page and then choose “Quick Pairing” to enter pairing mode via the smartphone.

About Inching
(If you need this function, please activate it and then set the inching duration according to your needs.) Click “…” in the top right corner and you can see the inching function as shown in the picture below.

Note: The picture in this part may be different due to the different firmware version, but the operation steps are the same. Please refer to the latest version.

TROUBLESHOOTING

• Q: Why does not the transmitter’s LED light up when I press the button on it?
  • A: The battery power may be exhausted. Please replace the battery.
• Q: Why can’t the lock be unlocked after pressing the transmitter?
  • A: Please check the issue by the following steps:
  • a: Check whether the remote control receiver and transmitter are paired successfully.
  • b: Check whether there is any metal object around the remote control receiver as it may shield the signal.
• Q: Can I connect the access keypad to this remote control switch?
  • A: Yes.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines,

This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>