Nedis HPBT8051BK Fully Wireless Sport Earphones User Manual

: June 5, 2024
: nedis

HPBT8051BK Fully Wireless Sport Earphones

Nedis HPBT8051BK Fully Wireless Sport Earphones

User Manual

Preface

Thank you for purchasing the Nedis HPBT8051BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis HPBT8051BK is a pair of fully wireless earphones.

With ear hooks for supreme comfort and fit during sporting activities.

The product can be paired with any Bluetooth enabled audio/video device.

Earphones can be charged up to 2 times in the charging case.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Fully Wireless Sport Earphones

---|---

Article number

|

HPBT8051BK

Power input

|

5 VDC ; 1.0 A

Bluetooth® version

|

5.0

Bluetooth® frequency range

|

2402 – 2480 MHz

Frequency response

|

20 Hz – 20 KHz

Max. radio transmit power

|

3 dBm

Impedance

|

32 Ω

Sensitivity

|

106 ± 3 dB

Driver size

|

10 mm

Voice control

|

Siri, Google Assistant

Charging time

|

Up to 1.5 hours

Case recharges

|

Up to 2 times

Battery capacity earphones

|

2 x 80 mAh

Battery capacity charging case

|

300 mAh

Play time

|

Up to 8 hours

Waterproof

|

No

Main parts (image A)

A

1. Micro USB port

2. Charging indicator LED

3. Right earphone slot

4. Left earphone slot

5. Left earphone button

6. Right earphone button

7. Status indicator LED / Microphone

8. Micro USB cable

9. 3 Pairs of ear tips (S/M/L)

Safety instructions

WARNING

Only use the product as described in this manual.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not expose the product to direct sunlight, naked flames or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Do not open the product.
Keep the product out of reach from children.
This product is not a toy. Never allow children or pets to play with this product.
Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas .
Listening on high volume for a long time will damage your hearing.
Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Do not short circuit.
Do not repair the product. If damaged, it must be properly disposed of.
Only use the product as described in this manual.

Safety symbols on the product

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Pairing the earphones to a Bluetooth audio source

1. Take the earphones out of the charging case. The earphones switch on automatically.

Press and hold both earphone buttons A 5, A 6 for 2 seconds to switch the earphones on manually.

2. The status indicator LED A 7 starts blinking to indicate pairing mode is active.

3. Enable Bluetooth on the device you want to pair the earphones with.

4. Select “ HPBT8051BK ” from the list of available Bluetooth devices on your device.

Charging the product (image B)

B

1. Plug the micro USB cable A 8 into the micro USB port A 1.

2. Plug the other end of A 8 into a computer or power adapter.

3. Plug the power adapter into a power outlet.

4. The charging indicator LEDs A 2 indicate the charging progress of the battery.

5. Place the earphones into the respective slots A 3, A 4 to charge the earphones.

6. The status indicator LED A 7 on the earphones lights up red.

7. A 7 switches off when the earphones are fully charged.

The earphones and the charging case can charge simultaneously.

Use

Switching on the product

Press and hold A 5 and A 6 for 2 seconds to switch the product on or off.

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.
To answer an incoming call, press A 5 or A 6.
To reject an incoming call, press and hold A 5 or A 6 for 1 second.
To end a call, press A 5 or A 6.

Controlling the music

Press A 5 or A 6 to play or pause the music.
Double press A 6 to skip to the next track.
Double press A 5 to skip to the previous track.
Add Siri/Google Assistant function
Press and hold A 5 or A 6 for 1.5 seconds to activate Siri/Google Assistant.

Restore to default settings

1. Make sure that the earphones are switched off.

2. Press and hold A 5 and A 6 for 5 seconds.

This function is suggested to be used when the earphones can not connect to each other under the conditions of common use.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.
Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT8051BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/hpbt8051bk#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands