HelloBaby HB2035 2.4GHz Digital Wireless Video Baby Monitor User Manual
- June 17, 2024
- HelloBaby
Table of Contents
User Manual
2.4GHz Digital Wireless Video Baby Monitor
HB2035 2.4GHz Digital Wireless Video Baby Monitor
Model: HB2035
The pictures are for reference only, please subject o pracicality.
Thank you for purchasing the HB2035 Baby Monitor. With our baby monitor, you
could see and hear your baby sleeping or playing in their room anytime.
Please retain your original dated sales receipt for your records. For warranty
service of your product, you will need to provide a copy of your dated sales
receipt to confirm warranty status. Registration is not required for warranty
coverage.
PLEASE MAKE SURE THE FOLLOWING INCLUDED IN YOUR PACKAGE
- Parent unitx 1
- Cameraunitx 1
- Power adapter x2
- User manualx 1
- Wall-mounting kit x 1
SAFETY INSTRUCTIOINS
Caution: Keep the device away from children
Strangulation hazard: Children have STRANGLED in cords. Keep this cord out of
the reach of children (more than 3ft (0.9m) away). Never use extension cords
with AC Adapters. Only use the AC Adapters provided.
Choking hazard : This product contains small parts, please be careful when
unpack and assemble the product,
Read and keep to instructions: Allthe safety and operating in structions
should be read before the video baby monitor is operated. This product cannot
replace responsible adult supervision.
Water and moisture: The unit should not be exposed to rain, moisture, dripping
or splashing. No objects filled with liquid should be placed on top of, or
beside the product, such as a glass. orvase. This item should not be used near
water.
Donot: Use the appliance if the cord or plug is damaged. If your baby monitor
is not operating properly or has suffered any damage, contact
“service@hellobaby.net.cn” service centerto request inspection and repair of
the appliance in order ta avoid any possible risk.
Do not: Attempt to repair or adjust any of the electrical or mechanical
functions of the unit Otherwise, the guarantee will be made void
Ventilation: This baby monitor should not be used on a bed, sofa, rug or
similar surface that may block the ventilation openings, or be placed in an
enclosed area such as a bookease of drawer that may impede ai flow.
Keep away from sources of heat: This unit should not be exposed to direct heat
sources such s a candle, radiator, heat register, stove or other appliance
that emits heat. The unit should not be left in direct sunlight.
Power source: This unit should only be used with the AC power adapters
included in this package (rated 5V DC 1A),
Damage requiring service: This unit should be serviced by qualified personnel
only when:
- Objects have fallen or liquid has been spilled into the product.
- The units have been exposed to rain.
- The units do not appear to operate normally or exhibits a distinct change in performance.
- The units have been dropped or the enclosure damaged.
WARRANTY TERMS
We offer one-year warranty from the original purchase date against defects in
workmanship and materials. If you have warranty or supportissues, please
contact our after-sales service via email
INSTALLATION GUIDELINES
- To use your parent unit and camera unit together, you have to establish a radio link between them, and the range will be affected by environmental conditions.
- Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors of reinforced concrete between the baby and parent unit may block the radio signal
- The signal strength may also be reduced by other solid structures, like walls,or by radio or electrical equipment, such as TV, computers, cordless o mobile phones, fluorescent lights or dimmer switches
- Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least Sft (1.5m) from such products, or turn them off f they cause interferences.
PLACEMENT OF THE BABY MONITOR
‘The camera can be placed on the desktop or mounted on the wall. Don’t place
baby monitor on soft quilts or blankets or in the corners of cupboards,
shelves, etc; Keep the baby monitor away from heat sources such as radiators,
chimneys, cookers and direct sunlight; Keep the baby unit away from TV sets,
microwave oven and radios. If interference occurs, move the camera o
elsewhere,
- Place the camera within 6 feet (2 meters) of the area being monitored for optimum performance.
GETTING STARTED
5 1 TURN ON THE BABY UNIT:
- Insert the DC plug of the power adapter nto the DC jack in the rearof the Baby Uit
- insertthe other end of the power adapter into suitable electricaloutlet
- 0nce the adapter is connected, the power LED willlght up
5.2TURN ON THE PARENT UNIT:
- Insert the DC plug of the power adapter nto the DC jack n the side of the parent Unit
- insertthe other end of the power adapter into suitable electrical outlet
- Press and hold the power key 3 seconds on the top of the parent uit
- Once parent it is on, the power LED willight up and the image willdsplay on the LCD.
5.3 INFRARED NIGHT VISION (AUTOMATIC)
The infrared night ision function allows the camera to pick up images in dark
or low light conditions.In this mode, only black and white images will be
displayed on the monitor, the optimum image lie in where baby unit is 6t (2m)
away from object. The camerais is night ision mde, the con ( ) will b
displayed on the top of screen.
PRODUCT OVERVIEW
6.11CONS OVERVIEW:
6.2 PARENT
UNIT OVERVIEW. 6.3 BABY UNIT
OVERVIEW:
KEY OPERATION
7.1POWER SAVE/SCREEN OFF
Short press the power key ey to turn on / offthe screen.
7.2 VOLUME ADJUSTMENT
Press the A key to increase the volume; Press the W key to decrease the
volume.
7.3 BRIGHTNESS ADJUSTMENT
Press the key to decrease the brightness; Press the key to increase the
brightness.
7.4 CAMERA VIEW/SCAN
Press scan key to view/scan camera, during scan mode, the scan icon will be
displayed on the top of screen. Each camera’s video will be stay on the LCD
around 10 seconds then change to next camera
7.5 DIGITAL ZOOM & PAN / THLT
Press and hold the key around 2 seconds to operate Zoom in / out; At the
Zoom mode, press the < key to Pan lef; press B> key to Pan right; press key
totilt up; press key totilt down; During digital zoom mode, the zo0m icon
@2uwill be displayed on the top of ‘Warm reminder: If you want to adiust the
volume/Brightness, you have to exit the Zoom mode before you operate i
7.6 TWO WAY TALK
Press and hold key to enter two way talk mode. A microphone icon will be
displayed in the corner of the LCD screen. Release the key to stop.
Note: When you are in the two-way talk mode, the parent unit speaker is
muted.
MENU OPERATION
8.1 PAIRING THE CAMERA AND PARENT UNITS.
The baby unit s pre-registered to your parent unit. You do not need to
register it again unless the baby unit loses itslink with the parent unit. To
re-register your baby unit, or register anew baby unit, follow the procedure
below:
WARNING
Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out
of the reach of children (more than 3 ft (0.9 m) away). Do not remove this
tag. Note: Camera iconwith™ ” means itis wellreglstered. You should select
and pair with the camera icon without ” sign.
5.1.1ADD CAMERA
- Press the MENUCD then the menu wil pop up.
- Pressthe
key untilthe camera icon selected - ress OK key to enter into sub-menu, then press key to select your desired camera
- Press key enter into sub-menu; Press key to select then press ( ) key.
- while the icon displayed on the LCD screen, press the PAIR button on the back of camera.
- 0nce paired, Successful pairng icon shows on the LCD screen.
- If falis, repeat the above steps.
5.1.2 DELETE CAMERA
- Press the MENU key and the menu will pop up.
- Pressthe key untilthe camera icon is selected.
- Press OK key, to enter into sub-menu, then press key to select the camera you want to delete
- ress key enter into sub-menu; Press key to select then press key.
- Press key to select for deleting the camera.
- ress OK key to confirm the option.
5.2 TEMPERATURE UNITSETTING
- Press the MENU/OK key and the menu will pop up.
- Pressthe key untilthe temperature icon [l is selected.
- Press key enter into sub-menu
- press Pkeytoselect the °F or °C for satting temperature unit
- Press the key to confirm.
- Press the key to exit.
Note: The temperature detection range is 0°40 °C.
8.2.1 TEMPERATURE ALARM SETTING.
- press keytoselect for turning on alarm function; press key to canfirm.
- Press keytoselect for turning off alarm function; press ( ) key to confirm.
8.2.2 SETTEMPERATURE HI/LO ALERT LIMITS
- press / to select or (green for Hi/Lo lmits settings.
- Press keys to adjust the Hilimit when red is slected.
- Press keys to adjust the Lo limit when ( ) (green is selected.
Note: The high temperature alarm default setting is 36 °C, and the low
temperature alarm defaultsetting s & °C. When the temperature goes above ar
below the settings, the temperature icon will display on the screen. It
willalert user by beeps. Press any key on the parent unit to stop beeping and
flashing.
8.3 LULLABY SETTING
You can soothe the baby to sleep by playing a gentle lullaby from the
Camera unit
- Press the MENU key then the menu will pop up.
- Press the key untilthe lullaby icon
- press key enter into sub-menu.
- Pressthe key toselect one of the 8 available ullabies, and you can pick single playback, loop (all 8 lullabies) playback or stop .
- press key to confirm.
Note : The lullaby default setting is OFF.
5.4 ALARM SETTING
- Press MENU Key, the main menu will pop up.
- Pressthe key until the alarm icon is selected.
- Press key enter into sub-menu, Press the key to selected the alarm time you need.
- Press key to confirm,
- press key to exit
Note 1: The minimum unit is 0.5 hour. The maximum setting s 5 hours (7
levels).
Note 2: Once the alarm is turned on, alarm icon will isplay on the screen.
Note 3: The alarm default setting i OFF.
Note 4: When the alarm s ringing, press any key on the parent unit to turn the
alarm off.
Note 5: I you don’t turn off the alarm, the alarm will ring for 1 minute.
After three minutes the alarm willring again for 1 minute. The alarm will ing
for 3 times in total, after this the alarm goes of.
5.5 ENERGY SAVING
This mode allows you to control the sound activation of your baby unit. If
there s no sound around the baby unit within 30 seconds, it wil stop audio
transmission and turn off the screen of the parent unit. When the baby unit
detects any sounds louder than the sensitivity level, it willstart
transmitting the signal to the parent unit again and turn on the screen of the
parent unit. To change the ECO level, please follow the below instructions.
- Press the MENU key then the menu will pop up.
- Press the key until the ECO icon selected.
- Press key enter into sub-menu, then press key to select desired level.
- Press key to confirm.
- Press key to exit
Note: Low sensitivity level; the baby have to make 3 lot of sound
before the ECO functionis activated.
Note: is Middle sensitivity level.
Note: is High sensitivity level; the baby don’t have to make a lot of
sound before the ECO function is activated.
5.6 LANGUAGE SETTING
- Press the MENU key then the menu will pop up.
- Press the key until the language icon selected.
- Press key enter into sub-menu, then press key to select the language you need.
- Press key to confirm.
- Press key to exit.
TECHNICAL DATA
| Frequency | 2412MHz-2469MHz |
|---|---|
| Power Adapter | Parent Unit: Input: 100-240VAC 50/60Hz |
Output: 5V DC 1A
Camera Unit: Input: 100-240VAC 50/60Hz
Output: 5V DC 1A
Operating Range| Up to 1000ft (300m) outdoor (line of sight)
Up to 165ft (50m) indoor
Display| 3.5″ Diagonal TFT LCD
Battery (Parent Unit)| Li-ion 3.7V 2000mAh (7.4Wh)
Battery Life| Up to 8hours
Maximum power| <19dBm
Operation environment| Operation Temperature: +32F—+104F (0°C-40°C)
Battery Charging Temperature: +50E—+104F (10°C-40°C)
Relative Humidity : 15%-85%
TROUBLE SHOOTING
No Reception on The Monitor| * The power adapters may not be properly connected.
- Confirm that the camera and monitor are ON.
- Camera may be far away from the monitor.
- Camera and monitor may not be properly paired; follow PAIRING instructions.
---|---
Interference or Poor Reception| * Move the monitor close to the camera. - The camera or monitor may be placed too close to many metal objects.
- Other electronic devices may be interfering with the signal.
- The battery power may be too low.
Audio Feedback (high pitched noise)| * The camera and monitor may be placed too closed. - The volume on the monitor may be set too high.
Frozen Picture on Screen| * Repower the baby unit (plug out the adapter, then plug it into the
socket again). - Press the RESET key at the back of parent unit.
MAINTENANCE
- Clean your baby monitor with a slightly damp or anti-static cloth.
- Never use cleaning agents or solvents.
DISPOSAL GUIDE FOR BATTERY AND PRODUCT
- Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit
- Remember to dispose of the product in an environmentally responsible way.
- For proper collection and processing of these products, take them to the collection points designated by local authorities. You can also contact the store where you purchased the product.
Improper or incorrect use of batteries may cause corrosion or battery leakage,
which could cause personal injury or damage to property. Use only the types of
the batteries ‘which are indicated in this manual,
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45 degree
C or Incinerate. Follow Manufacturer’s Instructions.
- Disposal of a battery into fire or a hot aven, or mechanically crushing or cutting of a battery, that can resultin an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can esultin an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may resultin an explosion or the leakage of flammable liquid or gas.
- The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
FCCA ISDE Statement
This device complies with Part 15 of the FCC Rules and with Industry Canada
licence-exempt 55 standard(s).Operation is subject to the following two
conditions: (1)this device may not cause harmful interference, and (2)this
device must accept any interference received, including interference that may
cause undesired aperation. Cet appareil est conforme 3 la partie 15 des régles
de Ia FCC et aux normes RSS exemptées de icence ¢’Industrie Canada.
Changes or modifications to this unit not expressly appraved by the party
responsible for compliance could void the user’s authority to operate the
equipment NOTE: This equipment has been tested and found to comply with the
imits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
nterference ina residential nstallation. This equipment generates, uses and
can radiate radio frequency energy and, If not installed and used inaccordance
with the instructions, may cause harmful interference to radio communications.
However, there is o guarantee that nterference will not occur ina particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user s encouraged to tr to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a crcuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device meets the exemption from the routine evaluation imits in section
2.5 of RSS 102 and compliance with RS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment should be installed and operated with minimur distance 20cm
between the radiator & your body.
SAR Statement for Monitor
Specific Absorption Rate (SAR) information
This Monitor meets the government’s equirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientifc
studies. The standards include a substantia safety margin designed to assure
the safety of all persons regardiess of age or health. ISED & FCC RF Exposure
Information and Statement the SAR limitof Canada(ISED & FCC)is 1.6 W/kg
averaged over one gram of tssue. Device types: Monitor has also been tested
against this SAR imit. This device was tested for typical body-worn operations
with the back o the Monitor kept Omm from the body. To maintain compliance
with ISED RF exposure requirements, use accessories that maintain an Omm
separation distance between the user’s body and the back of the Monitor.. The
use of belt clips, holsters and similar accessories should not contain
metallic components n ts assembly. The use of accessories that do not satsfy
these requirements may not comply with ISED RF exposure requirements, and
should be avoided.
EU Declaration of Conformity (DOC)
Hereby, Videotimes declares that the radio equipment type is in compliance
with RED.
Directive 2014/53/€U.
The fulltext of the EU declaration of conformity is available on the website:
wwwhellobaby.net.cn
Model: H82035
Responsible Party(US): Startline LLC
Add: 22 Hazelwood Drive, Jericho, NY 11753 Tel:
1-516-681-3729
Authorized UK Representative(UK): APEX CE SPECIALISTS LIMITED.
Add: 89 Princess Street, MIAHT.UK info@apex-ce.com
Shenzhen Videotimes Technology Co.Ltd
Room 2106, Building 11, Tianan Yungu Phase Il, Gangtou Community, Bantian
Street,
Longgang District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>