Juniper 0955 Natural Wood Table Installation Guide
- June 1, 2024
- JUNIPer
Table of Contents
Juniper 0955 Natural Wood Table Installation Guide
Leg Installation
Place tabletop with bottom facing up on a soft surface to avoid scratching
table. Acacia tables come with pre-drilled holes for installation. Align legs
with pre-drilled holes and secure with provided screws.
OPT A | Standing-Height Angled Sleigh Legs with Support Braces
First, align leg and brace pilot holes to surface pre-drilled holes to
identify location of self-tapping screws on bottom of leg
OPT B | Seated-Height Angeld Sleigh LegsS
OPT C | Angled Post Legs
2-Piece Surface Installation
Place tabletops with bottoms facing up on a soft surface to avoid scratching
table. Lay the joining hardware into slotted areas and attach flat brackets
1.5 inches from surface edges. Align leg and brace pilot holes to surface pre-
drilled holes to identify location of self-tapping screws on bottom of leg.
Secure with hardware.
1-866-999-0955 | [email protected] | juniperoffice.com © 2023 Juniper Office | Version 23.0.0
