BN-LINK BNE-U167 Heavy Duty Programmable Digital Timer Instruction Manual

June 5, 2024
BN-LINK

PRODUCT# BNE-60/U167
DIGITAL TIMERBN LINK BNE U167 Heavy Duty Programmable Digital Timer
- Please keep this handbook
Designed in California
Made in China
www.bn-link.com 

PRODUCT VIEW

BN LINK BNE U167 Heavy Duty Programmable Digital Timer - FIG
3

RATINGS
Rated Voltage: 125V, 60Hz Max.Loading:15A/1875W Resistive, 10A/1250W Tungsten, l/2H

WARNING

• Use a grounded outlet
• Follow local electrical codes
• For indoor use only
• Keep children away| • Unplug the timer before cleaning
• Fully insert the plug
• Do not use in wet locations
• Do not exceed electrical ratings
---|---

APPLICATIONS

• Lighting
• Heating systems
• Humidifiers
• Nebulizers| • Cooling systems
• Indoor sprinklers
• Aquariums
• Ventilators
---|---

INITIAL SETUP

  1. Charge the internal battery
    If the screen is blank, plug the timer into any outlet for 30 minutes to charge the internal battery , or press any button to activate the screen display.

  2. Reset the timer
    Press the “RESET” button with the tip of a small non-metallic insulated tool, such as a pencil or toothpick. The LCD display will turn on.

  3. Unplug and program the timer With a charged battery, you can now set the timer up in the comfort of your chair. The screen will go blank if no button is pressed within 3 minutes. To activate, press any key.

SET UP CURRENT DAY & TIME

BN LINK BNE U167 Heavy Duty Programmable Digital Timer - FIG
6

For example: if it is 7:30am Friday, please follow below steps to set the current day and time.

  1. Press and hold the “CLOCK” button, then press the “WEEK” button until “Fr” displays on top of the screen. (Fig 01)
  2. Press and hold the “CLOCK” button, then press the “HOUR” button until 7:00 am displays on the screen. (Fig 02) Note: please pay attention to AM/PM.
  3. Press and hold the “CLOCK” button, and press the “MIN” button until 7:30 am displays on the screen. (Fig 03)

SET PROGRAM

  1. Press the “PROG” button to enter the program setting, and you will see the picture. (Fig 04) For example: if you want to turn on a device every day at 8:05 am and turn it off at 9:00 pm, please follow the below steps.

  2. Press the “WEEK” button to enter the program setting, you will see all the days of the week on the top and “1 ON” to the left of the display. (Fig 05) Note: Press “WEEK” multiple times until you get the day combination you want.
    Day combination options:
    MO to SU Individual day:
    MO,TU,WE,TH,FR,SA,SU
    MO to FR
    SA, SU
    MO to SA
    MO, WE, FR
    TU, TH, SA
    MO, TU, WE
    TH, FR, SA

  3. Press the “HOUR” button until 8:00 am displays on the screen. (Fig 06)

  4. Press the “MIN” button until 8:05 am displays on the screen. (Fig 07)

  5. Press the “PROG” button once to set the program “1 OFF” and you will see the picture. (Fig 08)

  6. Repeat steps 2 to 4 to set the program “1 OFF”. (Fig 09)

  7. If you want to set the second ON/OFF program, press the “PROG” button again, you can repeat steps 2 to 6 to set the program, or press the “CLOCK” to return the current time.
    Press the “R” button in any program to erase the program.
    Press the “R” button again to restore an erased program.
    You can set up 8 different ON and OFF programs for your timer. To do so, just repeat steps 1 to 6 for the program “2 ON” “2 OFF” “3 ON” etc…

  8. Once you have set the programs, make sure you’re in AUTO mode so that the timer will run your programs.

SWITCHING BETWEEN MANUAL/AUTO MODES OVERRIDING PROGRAMS/MANUAL TURN

ON/OFF

To run your programs, your timer must be in AUTO mode. You can tell which mode the timer is currently in by checking if AUTO or MAN is present below the current time. To switch between AUTO and MANUAL modes: Press and hold the “MANUAL” button for 4 seconds or more.
To override a program and turn on/off the timer: Simply press the “MANUAL” button once to turn the timer on or off manually.

BN LINK BNE U167 Heavy Duty Programmable Digital Timer - FIG
13

SET RANDOM FOR VACATION SECURITY

In order to use the random function, you must set at least 1 set of programs.
Pressing the “WEEK” and “HOUR” buttons simultaneously will activate security mode. “RND” will be shown on the right side of the display.
When the timer is working in Auto mode and the random function is on, the previously programmed ON and OFF times will be separately postponed by 2-32 minutes.
NOTE: A timer program shall be 33 minutes or longer for the random function to work properly.

Press the “WEEK” and “HOUR” buttons again to turn off the random function.

DST – DAYLIGHT SAVING TIME FUNCTION

Press HOUR & MIN simultaneously to activate or deactivate DST
Note: A small symbol ” +1 h ” will appear on the far right of the LCD screen when DST is active.
Turning on this function will change the current time 1 hour ahead; turning off the function will revert the change.
This timer cannot adjust Daylight Saving Time by itself. It must be manually enabled.

BN LINK BNE U167 Heavy Duty Programmable Digital Timer - FIG
15 TROUBLESHOOTING

The timer does not turn on or off.
a. Make sure AM and PM are correct on the current time and in the program settings
b. The timer program should be in the AUTO setting.
c. Make certain that both an ON and OFF time has been specified.
d. if the number is not clear or blank on the screen, please plug the timer into any outlet for 30 minutes to charge the internal battery, then press the Reset button.
e. if the timer can not Turn ON or Turn OFF on time, please check if the Random function is active.
f. if the timer is always ON or always OFF, please check if the program is in Auto mode.

BN-LINK INC.
12991 Leffingwell Avenue, Santa Fe Springs
Customer Service Assistance: 1.909.592.1881
E-mail: support@bn-link.com
http://www.bn-link.com
Hours: 9 AM – 5 PM PST, Mon – Fri
Designed in California
Made in China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BN-LINK User Manuals

Related Manuals