Bluedio T2-WH User Manual
- June 2, 2024
- Bluedio
Table of Contents
USER MANUAL
Bluedio Wired Headset
Model:T2-WH
Important safety Information
- Do not llsten at high volume levels for long periods of time to prevent hearing damage.
- Do not use the product if there is any potential danger.
- •Do not turn the volume too high to hear sounds around you, turn down the volume if you feel a tinnitus or the volume Is too high.
- Do not use the product In an environment that requires your special attention(e,g, in traffic),
- Keep the product, accessories and packaging parts out of reach of children, to prevent accidents and choking hazards.
- Always keep the product dry to avoid corrosion .
- Do not use the product if you feel obvious discomfort, Irritation or have other adverse reactions.
- Do not expose the product to extreme temperatures below- l 5″C (5″F) or above 55″C (131 ‘F), to maintain the lifespan of headset or battery.
Delivery Includes
- T2-WH wired headaet l pc
- 1.5m audio cabloj3.5mm plug) l pc for Apple and Samsung devlce
- 1.5m audio coblej3.5mm plug) 1 pc
Headset Overview
Operation
To answer a call:
With the headphone connected to your mobile phone, there Is a beep/ringtone
for an Incoming call, press the MF button on audio cable once or use your
phone to answer It.
To end a call:
Press the MF button on audio cable once or use your phone to end the call.
To reject a call: keep pressing the MF button on audio cable for around 2
seconds or use your phone to eject the call.
Voice recognition:
Keep pressing the MF button on audio cable for around 2 seconds.
Music play/pause:
Press the MF button on audio cable once to play or pause music.
Track Selection:
Press the MF button on audio cable twice to skip to the next track. Press the
MF button on audio cable three times to skip to the previous track.
All the above functions are applicable to iPhone and Samsung devices. Except the previous track Operation is only applicable to I Phone devices.
Specifications
Technical specifications
Magnet type: neodymium magnet
Transducer type: dynamic
Driver unit: 2 speakers (cb57mm)
Connection: 3.5mm Jack
lmpendence: 16□
Frequency response: 20Hz-20KHz
Sensitivity: 11 OdB
THD: <0.196
Operating temperature: -1 0 to 50″C
Bluedio T2-WH User ManualDownload
Questions about your Manual ? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>