MPJA 37054-MP Bi-Stable (Latching) Relay Module Installation Guide
- June 6, 2024
- MPJA
Table of Contents
37054-MP
**Bi-Stable (Latching) Relay Module
**
NOTE:
RELAY DEFAULTS TO NORMAL STATE OF COMMON CONNECTED TO NC CONTACT WHEN POWER
REMOVED
Bi-Stable SPDT Latching relay module with isolated contacts
Dual Trigger methods: On-board P/B switch or header pins for external Input.
Power: 12VDC
Trigger Level: Low: <2.5V
Alternate Action: Trigger ON/Trigger OFF
RELAY:
Coil: 12VDC
Contacts: SPDT
Rated: 10A @ 250VAC/30VDC
Terminal Strips for Relay contacts & Power.
0.1″ Pitch header with 7″ pigtail for an external trigger.
L: 2″ W: 1″ HT: 3/4″ WT: .05
Information including Drawings, Schematics, Links, and Code (Software)
Supplied or Referenced in this Document is supplied
by MPJA inc. as a service to our customers, and accuracy or usefulness is not
guaranteed nor is it an endorsement of any particular part, supplier or
manufacturer. Use of information and suitability for any application is at the
user’s own discretion and
the user assumes all risk.
Information Subject to Change Without Notice
All rights are retained by the respective Owners/Author(s)
MARLIN P. JONES & ASSOC., INC.
P.O. Box 530400 Lake Park, Fl 33403
800-652-6733 FAX
561-844-8764
WWW.MPJA.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>