KUAKE US-PT01 Dual Clip Bluetooth Remote Control Turner User Guide
- September 17, 2024
- KUAKE
Table of Contents
RF Remote Control Page Turner
“Bluetooth -Two Clip
User Guide
Product Description
Thank you for choosing this Page Turner.
You will have brand new reading experience!
‘With this RF Remote Control Page Turner, you can effortiessly tum Kindle
pages forward with just a gentle click of the remote button, eiiminating the
need for constant manual page flipping.
Achieve comfortable reading by remotely fipping pages from the cozy warmth of
your bed during cold winter days.
Once you’ve tried it, you’l surely fall in love with it.
It’s compatible with all capacitive touch screens like Kindle, Kobo, mobile
phones, tablets, and more.
Technical Specifications
Bluetooth modue frequency: Bluetooth 24GHz
Bluetooth TX power: Bluetooth 4dBm
Support Bluetooth version: Bluetooth 214EDR/3.0/4.X/5
Package Included
Product Diagram
How to Use (RF 2.4Ghz)
Step 1
Press and how the power button on the remote control The green light will stay
on and then tum off. indicating the remote control is on.
Step 2:
Power button of the the po cle, the indicator ght will flash green slowly to
indicate the on then press the button long again until the green Aght flathes
rapidly.
Step 3:
Press and hold the page fip button on the control and the remote control the
indicatur light will stop flashing, indicating successful pairing.
Step 4:
Clip the screen sensor clip on the Kindte in a suitable position. Press the
cage flip button on the remote control to tum the page normally.
*Please repeat the above steps for re-pairing before each use.
How to Use (Bluetooth)
Step 1
Long press the power button of the remote cordos to turn on & and press the
page fp button to light up the blue light indicating that the Bluetoom mode
Step 2:
Click the power button three times to make th remote control enter the pailing
state, the ite the red and the gres atemately Mashing
Step 3:
Open the Bluetooth page of your smartphone, find the name of the paired remote
control and parit (Remote Control Page Tumer)
Step 4:
Afters successtur paning, the blue light will be on for 5 seconds and then tum
off
Please repeat the above steps for re-pairing before each use.
FAQs
1. What should I do if it doesn't work?
a. Ensure the metal tip of the screen sensor dip is clean and in contact with the Kindle screen. b. Croure the recte control and the screen sensor clip are powered on. C. Confirm successful pairing the paming is successful, press the page flip button on the remote control and the recover indicator will lght up normaly. d. Reper. Place the screen sensor clip in the appropriate poston on the Kindle and repar of Kind may not be competitie with the page furner. Please contact us.
2. What should I do if the screen sensor clip blocks the words?
a. Adjust the position of the screen sensor close. b. Adjust the margins of the Kindle screen.
3. What does the indicator light in different states mean?
Low battery The red gre ashes slowly three times Charang. The red light stays or continuously Fully charged the green light is on, and goes off after unplugging.
4. How long does it take to get a full charge?
It will take around 1.5 hours to top off the screen sensor clip, and about 3 hours for the remote control.
5. How long the page turner can be used when it is fully charged?
With a daily usage of 2 hours, the remote contras can be used for about 150 days and the screen sensor clip can be used for about 15 days.
6. How long does it take for the page turner to turn off automatically?
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.