Pacific Sun Kore 7th Ultimate WiFi Dosing Station User Guide

Pacific Sun Kore 7th Ultimate WiFi Dosing Station

Wi-Fi Cloud Pacific Sun network setup

Connecting device to your home Wi-Fi network

1. Connect power to the PS device.
   
   Find your PS DEVICE on you Wi-Fi network list devices.
   Click directly to the device Wi-Fi Network.

2. Find a sticker on the device with a Wi-Fi network password:
   
   DEVICE ####
   Note:

   – it’s your unique number

3. Enter your PS Device- ### Wi-Fi network password.
   
   Next Click

4. Make sure you are connected to PS Device- ### Hotspot.
   
   

5. Open the Device WiFi network setup.
   Open your Internet Browser and type the device WiFi network IP address 192.168.4.1 into the address field.
   http://192.168.4.1
   
   Switch to STA+AP mode
   Under WiFi Association you should see Scanning for available home Wi- Fi networks.

6. Connect device to Home WiFi network.
   Select your Home WiFi network under Network SSID.
   Type in your Home WiFi network password, if applicable.
   Next Click:
   After this step the device will be available under your Home WiFi network usually with IP address format:

7. Restart the device.
   
   Power OFF and ON the device.
   Disconnect power and Connect back.
   On the LCD screen, see and take a note of the IP Address in a similar format.

Adding the device to Pacific Sun Cloud

1. Connect to your home Wi-Fi internet network, open Internet Browser, and go to the following address: https://cloud.pacific-sun.eu
   Click
   

2. Create Cloud Pacific Sun account.
   
   Enter Email address
   Enter Password
   Enter Password Again
   Next Click

3. After login, on the Dashboards :
   
   Click

4. Add a Tank:
   
   Type in your preferred Name
   Click

5. Under your tank Name:
   
   Click

6. Type In your preferred Name and select the device from the list:
   
   - > Kore 7
   - > Kore 5
   - > Calcfeeder PRO WiFi
   - > Pacific Sun Power Module
   - > Althea
   - > Alpha
   - > Hyperion
   Click Add Device

7. Under your Client ID:
   
   Click

8. Connect the device to Pacific Sun Cloud:
   
   Step    Click

9. Configure device and Ready:
   
   Step and Use your device IP address Click .
   Note: You can see the device IP address on the LCD screen after power OFF/ON in a similar format: 192.168. #.###

10. The device added to the PS Cloud, ready for the configuration process and operation.
    

Software and Firmware Upgrade

| Warning!
Switching OFF the power supply during the Firmware updating process may damage your doser CPU. Uploading wrong Firmware may damage your doser and void your warranty. The damage may require returning the doser to our service department to restore it’s original functionality.
Use only dedicated firmware upgrade software available for download on www.pacific-sun.eu in the Download section.
---|---

1. Connect your computer to the device dosing station via USB port.
   

2. Windows Operating System should be able to discover and install the new device USB device and show the communication COM port number.
   
   NOTE:
   If for the first time, Windows will not be able to install the new device (especially under Window OS) then download from the Internet and install the USB-to-Serial Converter Drivers: https://www.ftdichip.com/Drivers/VCP.htm (CDM v2.12.28 WHQL Certified)

3. Windows Operating System has the two following options to verify the correct USB Serial Port COM number:
   1. “Device Manager”
   2. “Devices and Printers”
   Option 1:
   Verify the USB Serial Port COM number under “Device Manager”.
   
   Option 2:
   Verify the USB Serial Port COM number from “Devices and Printers”.
   

4. Right Click on the device and select “Properties”.
   

5. The USB Serial Port COM number will be visible under device Properties.
   

6. Download the “Firmware Updater” application from the Pacific Sun website: http://www.pacific-sun.eu/pliki/PSunFlash32. zip
   Unpack the ZIP file and run the “Firmware Uploader”.

Note:
For the Mac OS version download from: http://www.pacific- sun.eu/pliki/PSunFlash21. app.zip

7. In the “Settings” tab, choose the port COM number the device is installed on the computer and click
   
   Note:
   For the Mac OS version, select the device you want to update from the list.

8. Go to the “Firmware” tab and click .
   

9. Select the previously downloaded Firmware file and click .
   

10. Click .
    

11. The Firmware upgrade will be in progress with message “Please wait……..”
    
    

12. Now, press the RESET push button on the device back panel.
    

13. The Firmware writing process will start and the number in bytes will be increasing.
    

14. The Firmware upgrade status will be indicated with the green progress bar.
    

15. Final Firmware Upload steps:
    
    1. At the end of the Firmware writing process program will show “Firmware updated”.
    2. Disconnect the USB cable from your computer and Pacific Sun device.
    3. Disconnect device from the power source for a few seconds and connect the power back.
    4. The Firmware upgrade process has been completed.

Troubleshooting

1. Reboot your home Wi-Fi router (power OFF/ON) and after that reboot your PS device (power OFF/ON).
   Wait a few minutes and check PS Cloud application interface functionality again.

2. If you have multiple Wi-Fi routers, make sure each of them has a unique name.

3. If you have multiple Wi-Fi routers, make sure you are connecting to the closest one with the strongest signal.

If you need technical support – please contact service@pacific- sun.eu

Copyright:
Pacific Sun Sp. Z o.o. ul. Ogrodników 22 84-240 Reda Poland
tel. + 48 58 778 17 17
email: office@pacific-sun.eu

References

• Pacific Sun

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>