BN-LINK Weather Wireless Remote Control Outlet User Manual

: November 14, 2023
: BN-LINK

Table of Contents

BN-LINK Weather Wireless Remote Control Outlet
FEATURES
SETUP
PROGRAMMING THE OUTLETS
TROUBLESHOOTING
TECHNICAL DATA
FAQs
Video-Introduction
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BN-LINK Weather Wireless Remote Control Outlet

FEATURES

Easily controlled by the remote control from up to 100 feet in line-of-sight.
Separate on and off buttons on the remote control.
Outlets will remain powered off after apower outage to save energy.
Power output up to 1875W at 125V(60Hz).
Low power consumption, reduces energy use and extends product life by up to 15%.
Manual pairing and unpairing.

SETUP

Install one 12V/23A battery in the remote control’s battery compartment, making sure the polarity of the battery is correct.
Plug the receiver into a outlet and plug a device or appliance into an outlet of the receiver.
Press the ON or OFF button on the remote control to operate the receiver outlet.

NOTES

Regularly change the battery in the remote control for best performance.
If you find the outlet switch is not responding or the LED indicator on the remote control becomes dim, the battery should be replaced.
Always dispose of old batteries properly with consideration for the environment.
Make sure the battery and outlets are installed firmly and correctly for safe operation.
The outlet switch is for indoor and outdoor use
Use only in well-ventilated areas.
Do not exceed the maximum load current of 15A(Approximately 1875W).

PROGRAMMING THE OUTLETS

Notes : The outlet is pre-programmed for immediate use, but the configuration can be customized to meet your needs.

To pair receiver to transmitter

Plug the receiver outlet to a power outlet.
Press and hold the ON/OFF button on the receiver outlet for 3 seconds and the LED indicator will start flashing slowly.
Release the ON/OFF button on the receiver and press ON or OFF button on the transmitter to pair the transmitter to the receiver.
To quit the paring mode, press and hold the ON/OFF button on the receiver for 3 seconds until the LED indicator goes off.

RESETTING AN OUTLET
Should you wish to unpair an outlet receiver from the remote, or if your outlet is unresponsive to the remote, the outlet can be reset following below steps.

To unpair receiver from transmitter

Plug the receiver outlet to a power outlet.
Press and hold the ON/OFF button on the receiver outlet for 3 seconds, the LED indicator will start flashing slowly. Keep holding the button until the LED indicator flashes fast and then goes off.
The receiver is now unpaired from the transmitter

TROUBLESHOOTING

In the case that the outlet receiver does not respond to the remote control , please follow the steps given below to resolve the issue:

Check to see if the battery of the remote is low and needs replacement.
Make sure that the outlet receiver is correctly placed in the power socket.
Make sure that the outlet receiver is used in an area with proper air circulation to avoid overheating.
Reset and program the outlet

TECHNICAL DATA

Voltage …………………………… 125V~60Hz
Resistive ………………………. 15A 1875W
Tungsten ………………………. 10A 1250W
Transmission frequency ……. 433.92MHz
Remote battery . .. . . . . . . . .. . . . . . . . . 12V /23A

CENTURY PRODUCTS INC.

3545 Granada Ave El Monie Ca 91731
Custom Service Assistance: 1.909.592.1881
E-mail: support@bn-link.com
http://www.bn-link.com
Hours: 9AM – 5PM PST, Mon – Fri
Designed in California Made in China

FAQs

What is the BN-LINK Weather Wireless Remote Control Outlet?

The BN-LINK Weather Wireless Remote Control Outlet is a device that allows you to remotely control electrical appliances and devices, providing convenience and energy savings.

Is the BN-LINK Weather Wireless Remote Control Outlet suitable for outdoor use?

Yes, the BN-LINK Weather Wireless Remote Control Outlet is designed for outdoor use, featuring weather-resistant properties to withstand various environmental conditions.

How does the remote control function work?

The BN-LINK outlet comes with a wireless remote control that allows users to turn connected devices on or off from a distance, providing convenience and accessibility.

What is the range of the remote control for the BN-LINK outlet?

The remote control typically has a range of 100 range, allowing users to control devices from a considerable distance.

Can the BN-LINK outlet be used with multiple appliances simultaneously?

Yes, the BN-LINK outlet is often capable of controlling multiple appliances simultaneously, providing flexibility and convenience for users.

Is the BN-LINK Weather Wireless Remote Control Outlet compatible with voice control systems like Alexa or Google Assistant?

Some models of the BN-LINK outlet may be compatible with voice control systems, allowing users to control devices through voice commands. Check product specifications for details.

What is the power rating of the BN-LINK outlet?

The BN-LINK outlet is typically rated for a specific power load, and users should check the product specifications to ensure it meets the requirements of their devices.

Can the BN-LINK outlet be programmed for scheduled operation?

Yes, some models of the BN-LINK outlet may feature programmable scheduling, allowing users to set specific times for devices to turn on or off automatically.

Does the BN-LINK Weather Wireless Remote Control Outlet come with a warranty?

The BN-LINK outlet may come with a limited warranty. Users are advised to check the product documentation or contact the manufacturer for warranty details.

Is the BN-LINK outlet compatible with standard electrical outlets?

Yes, the BN-LINK outlet is typically designed to be compatible with standard electrical outlets, making it easy to install in existing systems.

Can the BN-LINK outlet be used with smart home automation systems?

Some models of the BN-LINK outlet may be compatible with smart home automation systems, allowing users to integrate it into their existing smart home setups. Check product specifications for details.

Does the BN-LINK Weather Wireless Remote Control Outlet have surge protection?

Some models of the BN-LINK outlet may come with surge protection features, providing added protection for connected devices during power surges. Check product specifications for details.

Is the BN-LINK outlet suitable for use with high-power appliances?

Users should check the product specifications to determine the power capacity of the BN-LINK outlet and ensure it is suitable for use with high-power appliances.