IKEA 704.575.00 VAPPEBY Bluetooth Speaker Instruction Manual

704.575.00 VAPPEBY Bluetooth Speaker
Instruction Manual

704.575.00 VAPPEBY Bluetooth Speaker

Design and quality IKEA of Sweden
Get straight to the music with Spotify Tap Playback

VAPPEBY 20 gen3 (E2036)

1. AC IN connector
2. Enable/Disable auto-off switch
3. The power button and Spotify Tap
4. BT pairing button
5. Volume control
6. Battery compartment lid (battery sold separately)
7. AUDIO IN connector

Getting started:

1. Connect the mains cord to AC IN (1) connector.
2. Long press the ON/OFF button (3) to turn the speaker ON. VAPPEBY 20 starts to search for paired devices. If a paired device is found, the LED will change from blinking to steady light, and the speaker is ready to use.
3. If no device is found the LED continues to blink and enters the pairing

LED status
Flashing white: Bluetooth is pairing.
Solid white: Paired to a device.
Flashing red: Low battery.
Solid red: Charging (when the speaker is off) mode automatically. Go to the Bluetooth settings in your mobile device and connect to VAPPEBY 20 gen3. The LED should now stop blinking and your speaker is ready to use.
Adjust Volume
Turn the knob (5) left to decrease or turn it right to increase the volume level.

Using Spotify Tap TM
Get straight to the music with Spotify Tap Playback
Spotify TapTM
lets you resume and change music directly from your Bluetooth speaker with the press of one button.
If you have an iOS device:
Go to the App Store and download the Spotify app. You will be able to create an account or log in if you already have one.
If you have an Android device:
Go to the Google Play Store and download the Spotify app. You will be able to create an account or log in if you already have one.
First use

1. Make sure your device is paired via Bluetooth to your VAPPEBY speakers.
2. Make sure the Spotify mobile app is open. This will only be needed on the first use.
3. Press the Power button (3) to start the music. The LED indicator should blink twice.

From now on, whenever you quickly press the Power button (3), the music resumes anytime your device is paired and in range.
Changing music
Press again the Power button (3) to change what’s playing to a recommended track.
Play music from external sources:
Connect a portable audio device to the AUDIO IN (7) jack on the rear panel.
The speaker automatically detects the external input and disables Bluetooth functionality. Use a 3.5mm 3-pol Audio cable for this feature.
Use speaker throughout the home:
VAPPEBY 20 has the possibility to be portable. ENEBY battery pack is sold separately.

• To insert the battery, open the compartment lid (6) and insert the battery in the correct direction.
• The battery is charging in the product when the mains cord is connected and the speaker is turned on.
• When the battery is low a red LED in the knob (1) will flash. During charging the red LED is on.

CAUTION:

• Risk of explosion if the battery is replaced by an incorrect type.
• Replace only with the same or equivalent type.

Other settings:

Unpair Bluetooth devices
| Press and hold the Bluetooth pairing button (4) for ³1.5 s. The speaker will release the BT connection to the phone and start searching for another device to pair with. LED will change from steady light to flashing.
Set up a stereo pair| You can pair two identical VAPPEBY 20-gen3 speakers to create a wider stereo experience. In this configuration, one speaker serves as the left channel and the other serves as the right channel.
1.  Turn on both speakers.
2.   Press and hold the BT pair button (4) for 1,5 sec on each speaker to release any existing BT connections. LED indicator should be flashing on both speakers
3.   Press and hold the BT pair button (4) on both speakers at the same time for 4 seconds until a confirmation sound is played. Wait for the speakers to connect to each other
4.   The LED on one of the speakers will be flashing. Open the Bluetooth setting on your mobile device and connect to this speaker. This speaker will become the left channel in the stereo pair
To disable the stereo pair, follow the instructions “Unpair Bluetooth devices” on both speakers.
Enable/Disable the auto-off function| Move the switch (2) to position “20” to enable auto-off. The speaker will turn off automatically after 20 minutes if no music is played. Move the switch (2) to position “∞” to disable the auto-off function
Factory reset| Press and hold the volume knob (5) for 5 seconds. A confirmation sound will be played

Safety and important notice

WARNING:

• Risk of overheating! Never install the product in a confined space. Always leave a space of at least 5 mm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
• Never place the product or batteries near open flames or other heat sources, including direct sunlight.
• Only use this product indoors. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Never place this product on other electrical equipment.
• The mains plug or an appliance coupler is to be used as a disconnect device, the disconnect device shall remain readily operable.
• If the supply cord is damaged, replace it with a new cord set that is type approved for your country.
• No open flame sources, such as candle lights should be placed on the apparatus • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or similar.

IMPORTANT!

• The speaker is for indoor use only and can be used in temperatures ranging from 0º C to 40º C (32˚F to 104˚F).
• Do not leave the speaker in direct sunlight or near any heat source, as it may overheat.
• Do not subject the speaker to wet, moist, or excessively dusty environments, as this may cause damage.
• The range between the speaker and the receiver is measured in the open air.
• Different building materials and the placement of the units can affect the wireless connectivity range.
• Too high a volume can damage your hearing.
• Do not touch the acoustic components.
• Do not use the product as a shelf or stand.

CARE INSTRUCTIONS
To clean the speaker, wipe with a moist cloth. Never submerge the speaker in water.
NOTE!
Never use abrasive cleaners or chemical solvents as this can damage the product.
Product servicing
Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.
Save these instructions for future use.
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
Get straight to the music with Spotify Tap Playback
Spotify TapTM is a trademark owned by Spotify and any use of such marks by IKEA is under license. All other Spotify trademarks, service marks, trade names, logos, domain names, and any other features of the Spotify brand are the sole property of Spotify or its licensors.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by IKEA is under license. Other trademarks and trade names are those of their respective owners.

Troubleshooting

Problem

|

Tip

---|---
Cannot use Bluetooth:| Make sure the 3.5mm connector is not plugged into the AUDIO IN jack on the rear panel.
Make sure your phone, tablet, or other media device supports Bluetooth.
Make sure to connect to the IKEA device called VAPPEBY 20 gen3
Make sure your phone, tablet, or other media device is paired and that its Bluetooth is turned on.
Make sure no other Bluetooth devices in the room are paired. If so, turn off the Bluetooth function on that device.
Poor sound quality when playing via Bluetooth:| If Bluetooth reception is poor, move the device closer to the speaker or remove any obstacles between the device and the speaker.
Note: Bluetooth reception will normally operate at a distance of up to 6-8m in conditions with an unobstructed path. When objects, furniture, or walls are in between, Bluetooth reception will be reduced. When the device is placed in pockets of clothes or in a bag, Bluetooth reception can be reduced.
Poor sound quality when playing via AUDIO IN input:| Make sure your phone, tablet, or other media device is not at maximum volume, if so, turn down the volume.

How to use the ENEBY battery pack (battery sold separately):

Good to know

• It is normal for the battery to become hot during charging and it will gradually cool down after charging.
• Charging time may vary depending on the remaining charge, battery age, and ambient temperature.
• Battery storage temperature: -20°C to 25°C (-4°F to 77°F).
• Charger operation temperature: 0°C to 40°C (32˚F to 104˚F).
• Disconnect the battery from the power outlet before cleaning or when it is not used.
• Battery should not be left discharged for a longer period.
• Battery should not be charged while in contact with flammable material like textiles.
• This battery can only be used with IKEA products.

CAUTION

• Do not modify, disassemble, open, drop, crush, puncture, or shred the battery.
• Do not expose the battery to rain or water.
• Risk of fires and burns. Do not open, crush, heat above 140°F (60°C), or incinerate.
• Keep the battery away from open flame or sunlight to prevent heat build-up. Keep the battery away from high-voltage devices.
• This product is not a toy, keep it away from children. Ensure that all persons who use this product read and follow these warnings and instructions.
• Do not short-circuit the battery or its cells.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.

CARE INSTRUCTION
To clean the unit, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe dry.
NOTE!
Never use abrasive cleaners or chemical solvents since this can damage the product.
Product Servicing
Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.

TECHNICAL DATA

Type: ICBL14.4-36-A1
Capacity: 2600mAh/37.4Wh
Input: DC 16.8V, 2.0A
Output: DC 14.4V, 3.1A
For indoor use only
Rechargeable Li-Ion battery cell inside.
This device conforms to UL STD. 2054
Technical data

This device complies with Part 15 of the FCC Rules.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada’s license-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>