VOX ELECTRONICS 32DSQ-GB LED User Manual

LED 32DSQ-GB
USER′ S MANUAL

Safety Warning and Notice

Thanks for choosing the high-performance and multifunctional intelligent LED TV produced by our company. This precious thing will bring you better audiovisual enjoyment. The design of this product has given consideration to factors affecting personal safety, and the product itself has gone through strict tests prior to delivery. However, improper operation may result in electric shock and fire disaster. To ensure safety, prolong the service life of this product, and make sure the best performance of this product can be given full play, please read the manual and marking label carefully before using it and comply with the following safety instructions. Please keep the user manual for later use.

Under the Following Conditions

• Power failure or unstable voltage.

• Abnormal sound or smell from the device.

• The AC power cord is damaged.

• The TV set is damaged due to falling off, knock or impact.

• Any liquid or foreign matters enter into the TV set.
  Turn off the TV set immediately, unplug the power cord from the power outlet, and contact authorized maintenance personnel.

• If coal gas or other flammable gases leak, do not unplug the power cord of the TV set or other electric appliances; instead, close the valve of the gas immediately and open the doors and windows.

Warning

• Only use 220-240VAC, 50/60Hz power supply.

• All cables can be connected or pulled out only after the power supply is turned off.

• Do not fix the TV set in an unstable position, or else it may cause falling off, damage, or even fire.

• Do not put the TV set in the environment:
  1. With direct sunshine, moisture, overheating, undercooling or heavy dust;
  2. With flammable or explosive substance;
  3. With flammable or corrosive gas;
  4. In the bathroom, kitchen, etc.

• Do not use a damaged or improper power socket, and ensure that the plug and socket are connected properly.

• Keep the power plug and socket free of dust and metal pieces.

• Do not damage the power cord:
  1. It is prohibited to refit the power cord;
  2. Do not put a heavy object on the power cord;
  3. Keep the power cord away from the heat source;
  4. Do not drag the power cord when unplugging.

• Do not connect too many appliances to one power strip, or else it may cause fire due to high power consumption.

• Do not let open flame (e.g. lit candle) approach the TV set, or else it may cause electric shock or fire.

• Do not put the container filled with water on the TV set, to avoid electric shock or fire caused by water drop splashing.

• Do not penetrate any sharp object, metal, or liquid into the signal connector or air vents, to avoid short circuit and product damage as well as electric shock.

• The slots on the case are designed to release heat so as to assure that all inside components will not reach an extra high temperature and can work normally for a long time. Please do not cover the holes while placing them.

Do not touch the plug with wet hands, or else it may cause an electric shock.
Do not turn on the TV set in thunderstorm weather; instead, unplug the power plug and antenna connector to avoid lightning strikes.
Do not disassemble the TV set by yourself, or else it may cause electric shock or fire. Contact qualified personnel for maintenance.

Attention

• Do not let children climb onto the TV set.

• Keep the small accessories away from children’s reach to avoid swallowing.

• If the TV set won’t be used for a long time, please turn off the device and unplug the power cord.

• Before cleaning the TV set, unplug the power cord and wipe with a soft cloth; do not use chemical reagents and avoid foreign substances entering the device. The incorrect cleaning (such as cleaning fluid, water, etc) may lead to damage to the product’s appearance, erasing products’ printing information, even flowing into the machine, and damaging components, causing the machine can not display.

• To adjust the position or angle of the TV set, please disconnect all wires and move slowly to avoid falling off.

• Do not rub with a hard object, knock at, bend, or squeeze the screen.

• Do not use the machine immediately after transferring machine to the places with high temperatures from low temperatures, which will cause fogging inside the machine and failures.

• If the screen is broken and the liquid splashes on the skin, please wash with clean water immediately for 15 minutes, and go to see your doctor.

• To carry the TV set with your hands, please grasp the corners and hold the bottom; do not apply force on the panel.

• Displaying the same image for a long time or active image with fixed words, icons will leave “image persistence” on the screen which will not disappear after powering off for a long time. This undesirable phenomenon is not covered by a warranty.

• Healthy TV watching:
  1. Watch inappropriate light; poor light or a long time watching may hurt your eyes.
  2. Adjust the volume appropriately to avoid hurting your hearing.

• Unplug the power cord of the device to cut off the power supply.

• If a power plug or appliance coupler is used as disconnecting device, it should ensure easy operation.

• The power plug shall be connected reliably. Loose power plugs may cause sparkle and fire.

• All the technical specifications in the user’s manual and on the packaging are subject to changes without prior notice. If there is a slight deviation between the user’s manual and actual operation, the latter shall prevail.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Mounting and Connecting

Packing list

1. The TV set.
2. User Manual.
3. Remote control.
4. Power cord (or attached to a TV set).

Mounting the TV set
Tips on Installation

• The TV set should be mounted near the AC power socket for easy plugging and unplugging.
• For your safety, please select the appropriate wall mount bracket or base.
• To avoid hurt, it is required to place the TV set on a stable plane or fix it on a firm wall.
• Ask qualified personnel to mount the TV set on the wall. Improper mounting may result in an unstable TV set.
• Do not place the TV set in any place susceptible to mechanical vibration.
• Do not place the TV set in any place where insects may enter.
• Do not mount the TV set against an air conditioner, or else the internal panel of the display may condense moisture and cause failure.
• Do not place the TV set in any place with a strong magnetic field, or else it may be interfered with and damaged by the electromagnetic wave.

Mount on the base

Mount on the wall

Ventilation

• Please keep this space at least around the TV, as shown in the figure.
• Do not cover the air vents or insert any object into the enclosure.
• Do not put the device in limited space, e.g. bookcase or embedded closet, unless the TV set is properly ventilated.

Connecting peripheral equipment
Remark:

1. USB interfaces support peripheral equipment, including USB mass storage devices.
2. When you need to connect the device which supports the ARC function, please select the HDMI-2 interface.
3. HDMI connector can realize DVI connector function with external HDMI/DVI commutator.
4. TV2(DVB-S2) interface is optional, please refer to the device.
5. The peripheral equipment and cables described in this manual should be purchased separately.

Warning
When connecting the outdoor antenna to the signal port of the TV set, please turn off the main power switch of the TV set first. Do not approach the outdoor antenna to the high voltage mains power line to avoid electric shock. The wired network antenna connected to this TV set must be isolated from the protective grounding, or else it will cause fire or other hazards.

Y: Yellow (VIDEO signal cable)
W: White (AUDIO-L signal cable)
R: Red (AUDIO-R signal cable)

Panel Control Key

1. Power LED indicator and remote receiving window.
2. key: Entering power on or standby with the key:
3. When inserting the power code plug into the electrical socket, you can press a key to turn on the TV.
4. In the power-on state, press the key to turn off the TV.

After the TV is turned on:

1. In the non-OSD menu, keep pressing a key to display the function menu.
2. In the function menu, keep pressing the key to select the next item, and press the key to confirm.

Notes:

1. Different models may have different appearances; please refer to the actual device.
2. Please use the remote control for more operation.

Remote Control

Note: The appearance of the remote control may be different from this diagram; please refer to the real object as the standard.
Keys to the Remote Control

instructions.)
INDEX ( )| Displays the index page in Teletext mode. (Play/pause function in multimedia)
ZOOM ( )| Adjust the Teletext size. (Stop function in multimedia)
HOLD ( )| Hold the displays on the current age. (Last file in multimedia).
LANGUAGE ( )| Change Teletext language. (Next file in multimedia).
Red key| Special function key
Green Key
Yellow key
Blue key

Method for Installation of Remote Control Battery
Remove the battery compartment cover and insert two AAA (No. 7, 1.5V) batteries; make sure the polarity of the batteries is in compliance with the polarity mark “+” and %” in the battery compartment of the remote control.
Precautions for using the remote control

• The remote control should be pointed at the remote control sensor during operation. An object placed between the remote control and the remote control sensor may impede normal operation.
• The remote control should be prevented from strenuous vibration. Besides, please do not set or place the remote control under direct sunshine, as heating power may result in the deformation of the remote control.
• Remote control failure may occur when the remote control sensor of the main unit is under direct sunshine or strong lighting; in this case, please change the angle of the lighting or this TV set, or operate the remote control near the remote control sensor.
• A low battery will influence the remote control distance, in which case, the battery should be replaced with a new one. If the remote control is going to be idle for a long time or the battery runs out, please take the battery out to prevent the remote control from being corroded by battery leakage which may result in damage and failure of the remote control.
• Please do not use batteries of different types. It is not allowed to use old and new batteries together; the batteries should be replaced in pairs.
• Please do not throw the batteries into fire or charge or decompose the batteries; do not charge, short-circuit, disassemble/assemble, heat, or burn used batteries. Please dispose of the waste batteries pursuant to relevant regulations on environmental protection.

Basic Operations

Remark:

1. The keys operation refers to remote control operation, for panel control keys operation please refer to the “Panel Control Keys” operation explanation.
2. Menu Operation Instruction in this manual is explained according to TV mode. The operations in other modes are similar to the ones in TV mode, and users can take it as a reference.
3. Before powering on the platform, please make sure that the power supply is stable.

Turning on/Standby
Plug the power cord into the electrical socket. Press the [ ] key to turn on the TV. Press the [ ]/ [ ]/[ ]/[ ] key to select the OSD language which you wish and press the [OK] key to confirm. Press the [ ]/[ ] key to select DVB Type and press the [OK] key for the next step.
In the display showing the interface, press the [ ]/[ ] key to select the Tune Type which you wish, then press the [ ] key and you can select the country where you are by pressing [ ]/[ ]/[ ]/[ ] key. Next, press the [OK] key to confirm(If you select France, you need to set a password. and you need to select BW when several countries were chosen), and the machine starts an automatic searching channel. (If the selected DVB Type is DVB-C, you need to set Tuning Mode as Network or Full. When you set it as Network, you need to press the [ ]/[ ] key to select Frequency, Modulation, Network ID, and Symbol Rate. Then press the [ ]/[ ] key to adjust the items. Finally, select Search and press the [OK] key to start scanning.)
In the power-on state, press the [ ] key to switch to standby mode.
Special Tips: This device adopts energy-saving technology. If there is no signal input in the power-on state, it will enter standby state automatically in five minutes; The device will enter standby state automatically at specified sleep time;
Signal source selection
You can connect various devices to the TV set and view high-quality images. If the video device has HDMI, AV, and other video output ports. You can select one of them and connect to the corresponding input ports of the TV set. After connection, turn on the device and press the [SOURCE] key, then a menu of signal sources will be displayed on the screen. Press the [ ]/[ ] key to select the input signal, and press the [OK] key to confirm.
Menu operation description
Press the [MENU] key to show the main menu on the screen:

1. Press the [ ]/[ ] key to select a menu from CHANNEL, PICTURE, SOUND, TIME, OPTION, and LOCK.

2. Press the [ ]/[ ] key to select an item in the menu.

3. Press the [OK] key to enter the submenu.

4. Press the [ ]/[ ] key to adjust the value or setting.

5. When the main menu shows on the screen, press the [ ]/[MENU] key to exit the main menu;
   Press the [ ]/[MENU] key to return to the previous menu when the TV display the submenu.

6. During menu operation, the icons of invalid options will change into grey.

Note: The default password for the lock system is 0000.
Program scanning
Tune the programs before watching the TV for the first time. Before scanning, please make sure that the antenna has been connected properly and select the Antenna Type you want to choose. The following example channel searching Tune Type is under DVB-T.
Auto Tuning
Press the [MENU] key, and select CHANNEL > Auto Tuning, then press the [OK] key. Next, press [ ]/[ ] key to select Tune Type: DTV+ATV, DTV, ATV. Press the [ ] key, then you can select the country where you are by pressing the [ ]/[ ]/[ ]/[ ] key and the machine starts auto- tuning after pressing a [OK] key. (If you select France, you must enter the password. And you need to select BW when several countries were chosen),If you choose DTV+ATV, the screen displays “Do you want to skip ATV tuning?” by pressing the [ ] key during auto-tuning the ATV channel. Press the [ ] key to confirm, then the machine starts automatically searching the DTV channel, or press the [ ] key to cancel. During auto-tuning the DTV channel, the screen displays the “Do you want to skip DTV Tuning?” by pressing [ ] the] key. Press the [ ] key to confirm, or press the [ ] key to cancel.
DTV Manual Tuning (In DTV signal source) Press [MENU] key, Select CHANNEL > DTV Manual Tuning, Press [OK] key to enter the DTV Manual Tuning menu, Press [ ]/[ ] key to select a channel, then press a [OK] key to confirm. During the search, you may press a [ ] key to interrupt the search and return to the last menu.
ATV Manual Tuning (In ATV signal source) Press [MENU] key, Select CHANNEL > ATV Manual Tuning, Press [OK] key to enter the ATV Manual Tuning menu, Press [ /[ ] key to select Sound System, Color System, Current CH, and press [ ]/[ ] key to select which you wish. Select Search, and press the [ ]/[ ] key to search for low frequency or high frequency. After searching, select Fine-Tune and press the [ ]/[ ] key to tune for low frequency or high frequency. During manual searching, you can press a [ ]key to interrupt the search and return to the last menu.
REC option
In DTV mode, Press the [REC] key, the REC option menu shows on the screen, and the system begins recording right now. Press [ ] key to stop and quit recording; Press [MENU] key and select OPTION > Recorded List, then you can select the file you want to play, and press the [OK] key to play it.

| FF 30S: Make a 30S jump forward.
| FB 30S: Make a 30S jump backward.

Note: The recording function can only support memorizer with the FAT32 file system. Memorizers with other file systems need to be formatted; Before formatting a memorizer, back-up useful data because the content of the memorizer can not recover after formatting.
Time Shift option
In DTV mode, Press the [T-shift] key, Time Shift option menu shows on the screen and the program is in a suspended state. Press the [ ] key to resume the play program. Press the [ ] key to stop and quit the time shift. When a user leaves the program for a short time, the time-shift function can suspend and cache the playing program to the U disk. When the user resumes playing, the program can continue to be played.

| FF 30S: Make a 30S jump forward.
| FB 30S: Make a 30S jump backward.

Multimedia player
Press the [SOURCE] key, then press the [ ]/[ ] key to select USB, and press the [OK] key to enter. Select the file type from MOVIE, MUSIC, and PHOTO.
■ Playing Files in local disk device: Before playing files on the local disk, insert the USB mass storage device into the USB interface. Select the local disk device in the file directory and press the [OK] key to enter. Select Return in the directory, and press the [OK] key to return to the previous folder. Select the target folder and press the [OK] key to enter the folder. Then press [ ]/[ ]/[ ]/[ ] to select the target file and press [ ] to play it. Press the [ ] key to return to the desktop.
Attention:

1. Nonstandard USB devices can’t be recognized probably; in this case, please replace a standard USB device;
2. The stream media system has certain restrictions on the format of files; the playing will be abnormal if it is out of the system restriction;
3. Do not remove the USB device while playing, or else the system or device may have a problem; Before replacing the USB device, please turn off the machine’s power supply;
4. The system supports standard USB1.1 and USB2.0 devices, such as USB mass storage devices and removable hard disks;
5. The maximum output current of the USB port of this device is 500mA, and the self-protection will be enabled if it is beyond this limit; please use an external power supply if an external device of higher current will be connected;
6. The system is complicated; when it is reading or playing files, the screen may be still or certain functions may be invalid due to the compatibility and stability of the USB device; in this case, please turn off the device and re-initialize the system.

Press the [INFO] key can display or hide the toolbar, While playing, select the menu option which you want, and press the [OK] key to perform the operation; you can press the [ ) key to exit playing, or press [ ]/[ ]/[ ]/[ ] key on the remote control to perform shortcut operation.

Troubleshooting

• Snowflake spots occur in the TV images and there is noise in the accompanying sound.
  1. Check if the antenna plug is loose or if the cable is in good condition.
  2. Check the antenna type (VHF/UHF).
  3. Adjust the direction and position of the antenna.
  4. Try to use a signal enhancer.

• There is neither display nor sound on the screen. The indication light is not on. Check if the power line is connected.

• Dotted line or strip disturbance occurs in TV images. Do not use an electric hair dryer aside from the TV set and adjust the antenna direction to reduce disturbance.

• Double images occur on the TV screen.
  1. Use high oriented antenna.
  2. Adjust the direction of the antenna.

• The images are colorless. Enter the “PICTURE” setting to increase color saturation.

• The TV has no accompanying sound.
  1. Adjust the volume to a proper degree.
  2. Press the [ ] key on the remote control to cancel mute mode.

• No signal input images show on the machine screen. The indicator light is blinking.
  1. Check if the signal connecting cable is loose or falls off. Reconnect it.
  2. The computer may be in standby mode, please reboot.

• The remote control distance is short or out of control.
  1. Remove the object to avoid blocking the remote control receiving window.
  2. Replace the battery.

• The machine is slow, the system crash, and can’t operate the machine.
  Disconnect the power supply first, and connect the power supply after about 1-2 minutes, then turn on the TV again.

Technical Specifications

Master unit
32″

Operating environment:
Temperature
RH
Atmospheric pressure| 5ºC ∼ 40ºC
20% ∼ 80%
86kPa ∼ 106kPa
Storage environment:
Temperature
RH
Atmospheric pressure| -20ºC ∼ 55ºC
20% ∼ 80%
86kPa ∼ 106kPa

Dimension (LXWx H) and Weight

Packing: 797 X 115 X 488(mm³)
Net Weight: 3.5kg
Gross Weight: 4.6kg

Technical specifications for TV

1. Supported standard:
   ATV: PAL D/K, I, BIG, SECAM D/K, BIG;
   DTV: DVB-T/T2/C (DVB-SIS2 optional).

2. Antenna input: 75 0 coax, unbalanced.

3. AV video input: 75 0, 1±0.1 Vp-p, RCA terminal.

4. AV audio input: 20K 0 , 0.2-2Vrms.

5. HDMI video input: 480i, 480P, 576i, 576P, 720P, 1080i, 1080P.

HDMI display mode

VESA mode

NO.| Mode| Resolution| Refresh rate
1| VGA| 720 X 400| 70Hz
2| 640 X 480| 60Hz
3| SVGA| 800 x 600| 60Hz
4| XGA| 1024 X 768| 60Hz
5| WXGA| 1360 X 768| 60Hz

Power management

Base Installation Instructions

Put the machine flat first, distinguish left and right base and base installation front and back direction, then install the bases in the bottom of the machine back cover as arrow direction in the figure. Align screw holes, then fasten screws (notice that base module has to be adjusted at figure status, otherwise it cannot be installed.)

Remark: The actual base and machine appearance may be different from the pictures; please refer to the actual device.

**Use of a TV wall mounting

**

Warning

• Please purchase a suitable TV wall mount when mounting your TV on the wall.
• Ensure that the bearing capacity of the wall for mount installation is no less than 4 times the weight of the TV set and the wall mount so as to avoid falling.
• Please refer to the instructions provided with the TV set and wall mount for installation.
• Make sure there is no cable or conduit in the wall section where a wall mount will be installed.
• Please entrust a professional technician to complete the installation. The company shall not be liable for accidents, personal injury, or damage caused by improper installation of the TV set.

|
---|---

**** L1: Thickness of wall mount

|

**** L1′: Thickness of wall mount

Distance between holes
on the wall(H xV)(mm)| Required screws
(recommended bolt length)(mm)
---|---
32″: 100×100| Up: 2x M4 (L=8+L1), Machine screws
Bottom: 2 x ST4 (L’=8+L1′), Flat tail self-tapping screws

Note:

• If any screws are found in the screw hole for the wall mount behind the TV set before installing the wall mount, the screws shall be removed and put in place for later use.
• Please buy the wall screws according to the actual situation.
• If there are flat tail self-tapping screws in the accessories, please decide whether it is suitable for use according to the actual situation of the wall mount.

32″:
ST4 x 10mm flat tail self-tapping screws 2pcs (option)

www.voxelectronics.com

Documents / Resources

| VOX ELECTRONICS 32DSQ-GB LED [pdf] User Manual
32DSQ-GB LED, 32DSQ-GB, LED
---|---

References

• Aparati za domaćinstvo | VOX Electronics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>