HYUNDAI TR 1088 SU3RB SD-USB-Radio Portable Player Instruction Manual
- June 5, 2024
- HYUNDAI
Table of Contents
TR 1088 SU3RB/SB/BS
INSTRUCTION MANUAL
SD/USB/RADIO PORTABLE PLAyER
Dear customer, thank you for purchase of our product. To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to became familiar with its features, and assure you years of faithful, trouble-free performance.
IMPORTANT NOTES
-
Keep instructions the safety and operating instructions should be retained for future reference.
-
Ensure you read the safety warnings carefully below before you operate the unit.
-
When the unit distorts because of strong smoke and heat, remove the batteries and cut off the power supply quickly.
-
When the set is not going to be used for a long time, unplug the AC lead and remove the batteries.
-
Clean the cabinet with a soft cloth. Detergent or alcohol is forbidden.
-
Don’t attempt to disassemble or repair this unit casually. Go to consult the properly qualified center when a malfunction happened.
-
Avoid installing the unit in the locations described below:
– Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
– On top of other stereo equipment that radiates too much heat.
– Places lacking ventilation or dusty places.
– Places subjected to constant vibration.
– Humid or moist places. -
Operate turning controls and switches as instructed in the manual.
-
This book is only a guide for user’s operation, not a criterion for configuration.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER
(OR BACK), NO USER-SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The Caution Marking is located at the bottom enclosure of the apparatus.
IMPORTANT SAfETy INSTRUCTIONS
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care-quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specifi ed by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.
-
Do not overload wall outlet. Use only power source as indicated.
-
Use replacement part as specified by the manufacturer.
-
The product may be mounted to a wall only if recommended by the manufacturer.
-
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
-
Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction.
-
Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
-
Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance – this indicates a need for service. -
The mains plug/appliance coupler/direct plug-in adapter is used as a disconnect device, the disconnect device shall remain readily operable.
-
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
LOCATION Of CONTROL
IMPORTANT NOTES
Avoid installing the unit in the locations described below:
- Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
- Dusty places.
- Places are subject to constant vibration.
- Humid or moist places.
POWER SOURCES
This unit operates with AC 220-240V~50Hz or 4 x DC1.5V “C” (UM-2) batteries.
Do not attempt to operate the unit on any other power source. You could cause
damage to the unit and void your warranty.
Please be sure the power outlet you plug this unit into is working and
receives constant power.
AC OPERATION
- When the AC power cord (included) is connected to the AC Power Socket on the back of the unit and the other end is plugged into an AC 220-240V~50Hz wall outlet, the unit will disconnect the batteries automatically, and operate on AC Power only.
- Press the “ ” button once to power on, press and hold the “ ” again to power off!
- Press the “MODE” button and switch to “FM” or “USB” or “CARD” or “AUX” mode.
BATTERY OPERATION
- Remove the BATTERY DOOR.
- Install 4 x DC1.5V “C” (UM-2) batteries (not included) according to the polarity diagram inside the battery compartment.
- Close the BATTERY DOOR.
IMPORTANT: Be sure that the batteries are installed correctly. The wrong
polarity may damage the unit and void the warranty. For best performance and
longer operating time, we
recommend the use of good quality alkaline-type batteries.
CAUTION
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- If the unit is not to be used for an extended period of time, remove the battery. An old or leaking battery can cause damage to the unit and may void the warranty.
- Do not dispose of batteries in fi re, batteries may explode or leak.
BATTERY REPLACEMENT
When the output sound of this unit becomes distorted, the batteries are weak.
You need to replace all the exhausted batteries at the same time as soon as
possible to avoid battery leakage.
FM OPERATION
- Press the “ ****“ button to switch on the unit.
- Press the “MODE” button until the system entered the FM Radio mode.
- Press the “ ****” button for 2-3 s, and the high side of FM will seek the channel automatically and fix the channel.
- Press the “ ****” button for 2-3 s, and the low side of FM will seek the channel automatically and fix the channel.
- During FM reception, always keep the FM TELESCOPIC ANTENNA fully extended for best performance. However, if FM reception is weak, try repositioning the unit near an open window until you get the best reception.
- Press the “ ” or “ ” to control the volume level.
- Press and hold the “ **** ” button to power off.
Preset Radio Station
– This product is equipped with auto station searching & saving functions.
– In FM mode, press and hold “ ****”, and the unit will auto search and save
all available radio stations.
– Press “PRE.+” once to select the previous preset station or press “PRE.-”
once to select the next preset station.
USB OPERATION
- Press the “ ****” button to switch on the unit
- Press the “MODE” button unit the system entered the USB/SD mode
- Connect the USB fl ash to the USB port. The unit will start playing automatically
- Press the “ ****” button once for selecting the previous track, press and hold for backward searching
- Press the “ **** ” button once for selecting the next track, press and hold for forward searching
- Press “ + ” for playing the next album. Press “ ” for playing the previous album
- Press “ ” or “ ” to control the volume level
- Press and hold the “ **** ” button to switch off the unit
REPEAT
Press and hold the “MODE ” button during USB or Card mode each press switches
the mode function as follows.
- Repeat 1
- Repeat Album
The unit cannot read my USB device.
– Once you have plugged your device into the unit, you may need to switch on
the USB device before it can operate.
– This unit does not support a direct USB connection with a computer. You need
to use a USB device or an MP3 player.
– If you are using a USB external hard disk: you need to connect your device
simultaneously to an external power source and to the unit. If you are using a
self-powered PMP, make sure that the battery is sufficiently loaded.
– Check that the file system of your USB device is formatted into the FAT or
FAT 32 format.
USB devices formatted into NTFS are not compatible with this unit.
Caution: if you attempt to modify your file system, formatting your device
will erase all data.
Please refer to your USB device’s instruction manual first.
SD CARD OPERATION
- Press the “STANDBY” button to switch on the unit
- Press the “MODE” button unit the system entered the USB/SD mode
- Connect the SD card to the card slot. The unit will start playing automatically
- Press the “ ****” button once for selecting the previous track, press and hold for backward searching
- Press the “ **** ” button once for selecting the next track, press and hold for forward searching
- Press “Album +” for playing the next album. Press “Album-” for playing the previous album
- Press “VOL+” or “VOL-” to control the volume level
- Press and hold the “STANDBY” button to switch off the unit
REPEAT
Press and hold the “MODE ” button during USB or Card mode each press switches
the mode function as follows.
- Repeat 1
- Repeat Album
The unit cannot read my memory card.
Check firstly that your memory card is compatible with the unit. Supported
memory cards are SD, SDHC, and MMC formats. We have tested this unit with most
of the market’s memory cards; we cannot however guarantee full compatibility
with all the cards in the market because of the multiple technology standards
in use. Should you have a compatibility problem: please use a memory card with
a lower capacity (2GB or lower) or else connect the unit through a USB device.
CLOCK OPERATION
- Clock setting only available in the OFF mode
- Press and hold the “ **** ” until the unit entered the clock setting mode. The display will flash and enter the 12/24 hour display setting
- Press “ ” or “ ” to select desired setting
- Press “ **** ” to confirm and enter the next setting
- Repeat steps 3 and 4 for setting the Hour and Minutes
AUX IN OPERATION
- Connect a 3.5 mm cable to this unit and your device with a 3.5 mm output jack.
- Press the “MODE” button until the system entered the AUX mode
- Press “ **** ” on your device and enjoy.
Remark:
AUX mode will only appear when the unit is connected with the 3.5mm jack cable
(3.5 mm Aux-in cable not included)
SLEEP OPERATION
- Press the “ ” button to set the auto switch off timer (90>80>70>60…10>OFF>)
- The unit can also switch off anytime by pressing and holding the “ ****” button
SPECIFICATIONS
General
Power Supply: AC100V – 240V~ 50/60Hz
DC: 4 x 1.5V ‘C’ (UM-2) Batteries (Not included)
Power Consumption: 4W
Standby Power Consumption: 0,18W
Output Power (RMS): 2 x 1W
Unit Dimensions: 182 x 170 X 90 mm
Unit Weight: 0.6 kg
Radio
Tuning Frequency: FM: 87.5–108MHz
CARE AND MAINTENANCE
- Children should be supervised when using this appliance.
- Never wrap the earphone lead around any animal or person. Special care should be taken with long wires.
- Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
- Avoid leaving your unit in direct sunlight or in hot, humid, or dusty places.
- Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
TROUBLESHOOTING GUIDE
Symptom | Possible Cause | Solution |
---|---|---|
Noise or sound distorted on FM broadcast | – Station is not tuned properly for |
FM.
– FM telescopic antenna is not extended.| – Retune the FM broadcast station.
– FM: Extend FM telescopic antenna.
FM no sound| – Unit is not in “FM” function mode.
– Volume set at a minimum| – Press Function Switch to the “FM” position.
– Increase Volume.
Sound appears distorted at a high volume setting| – Volume control is set to
– maximum.| Adjust Volume Control to a lower comfort level.
Note:
- Use a pen to press the reset button (B13) if the Unit does not work properly.
- Avoid placing the clock near interference sources/metal frames such as computers or TV sets.
- The clock loses its time information when the battery is removed.
- Buttons will not function while scanning for DCF time signal or thermo sensor’s signal unless they are well received or stopped manually.
- All Setting Mode will automatically exit in 15 seconds without any adjustment.
WARNING: Do not use this product near water, or in wet areas to avoid
fire or injury of electric current. Always turn off the product when you don’t
use it or before a revision.
There aren’t any parts in this appliance that are reparable by consumers.
Always appeal to a qualified authorized service. The product is under a
dangerous tension
Old electrical appliances, used batteries, and accumulators disposal
This symbol appears on the product, on the product accessories, or on the
product packing means that the product must not be disposed of as household
waste. When the product/ battery durability is over, please, deliver the
product or battery (if it is enclosed) to the respective collection point,
where the electrical appliances or batteries will be recycled. The places,
where the used electrical appliances are collected, exist in the European
Union and in other European countries as well. By proper disposal of the
product, you can prevent possible negative impacts on the environment and
human health, which might otherwise occur as a consequence of improper
manipulation with the product or battery/ accumulator. Recycling of materials
contributes to the protection of natural resources.
Therefore, please, do not throw the old electrical appliances and batteries/
accumulators in the household waste. Information, about where it is possible
to leave the old electrical appliances for free, is provided at your local
authority, at the store where you have bought the product. Information, on
where you can leave the batteries and accumulators for free, is provided to
you at the store, at your local authority.
WE RESERVE THE RIGHT TO CHANGE TECHNICAL SPECIfICATIONS.
Licensed by Hyundai Corporation, Korea
Documents / Resources
|
HYUNDAI TR 1088 SU3RB SD-USB-Radio Portable
Player
[pdf] Instruction Manual
TR 1088 SU3RB, SD-USB-Radio Portable Player, Portable Player, TR 1088 SU3RB,
Player
---|---