STAUBLI 18.6667 Gigabit Ethernet Connectors for Docking Applications User Manual
- June 5, 2024
- STAUBLI
Table of Contents
FAST MOVING TECHNOLOGY
Gigabit Ethernet connectors for docking applications
DuraDock ready
DuraDock ready Introduction
Robots, efficient assembly technology, and image processing are groundbreaking for Industry 4.0 and key technologies in many industries such as automotive engineering. Stäubli delivers suitable Gigabit Ethernet connectors for advanced automation technology.
The connectors guarantee safe and reliable transmission of signals, data, and fieldbuses. DuraDock the brand for connectors for the highest demands and applications with very high mating cycles. With up to one million mating cycles, they can easily meet all the requirements of automated industry sectors such as automotive, electronics, testing, and many more.
Areas of application:
- Automatic tool changers
- Automatic (multi) couplings
- Test benches
- Robotic-aided manufacturing and production
DuraDock ready
“ready” the name says it all. All connectors in this series are plug-and-
play, i.e. suitable for immediate use. You save time and effort for wiring and
connecting cables including stripping, crimping, soldering, etc.
The installation in docking plates or machine parts takes place after:
- Performing the drilling plan
- Inserting anti-rotation grooved pin
- Fixing the retaining ring
- Screwing on the M12 connecting cable
Gigabit Ethernet Connectors
Gigabit Ethernet connectors for signal and data transmission for applications
with docked camera systems and components with field-bus communication:
Manufacturing:
- In automotive body shops and assembly for gap detection, parts positioning, etc.
Logistics and Material Handling:
- Pick-and-Place
Quality Assurance:
- Quality control with camera in mill-ing-whead machines with integrated real-time-process analysis
- In automotive press-shops for crack detection after stamping
- In paint shops for quality control
Testing systems:
- Automatic and manual docking systems in test benches for transmission, engines or turbines Image processing:
- Digital image processing and the required GigE-Vision interface
2 Gigabit Ethernet connectors for docking applications
DuraDock ready Giga10
Extremely compact connectors for the highest demands up to 10 GBit/s. All 8
poles of the Ethernet are available.
For mounting in docking plates with 6.6 mm and 13 mm spacing.
Note
- Degree of protection IP65
Assembly instructions MA203
www.staubli.com/electrical
Order No. | Type | Description | Suitable for |
---|---|---|---|
18.6667 | Giga10-S90-S-M12X | Pre-assembled and tested | |
connector | Network cable, Ethernet, CAT6A, 8 pin (10 GBit/s) | ||
18.6666 | Giga10-S90-B-M12X |
Giga10-…
Orientation of the M12 socket at 45° min. CAT6A (10 GBit/s)
M12 connector
IEC 61076-2-109, Ethernet, CAT6A,
CAT6, min. 1 or 10 GBit/s
DuraDock ready Giga1
Robots, assembly technology and image processing are key technologies in modern vehicle manufacturing. Stäubli provides the appropriate gigabit Ethernet plug connectors for future-oriented automation technology.
Applications
- Automatic tool changing on the robot
- Docking systems on transmission or engine test benches
- Digital image processing using the GigE Vision interface
Note
- Degree of protection IP65
Order No.| Type| Description| Plug termination| Fits|
Cable outlet
---|---|---|---|---|---
| | | | | Axial| 90°
18.0184| Giga1-IS-S-M12X| Pre-wired connectors| M12 x-coded| Network cable,
Ethernet, 8
pin min. CAT5e (1 GBit/s)| ×|
18.0185| Giga1-IS-B-M12X
18.0386| Giga1-IS90-S-M12X| | ×
18.0387| Giga1-IS90-B-M12X
Stäubli Giga1 connectors are supplied ready for use for fitting into docking plates. Once assembled, they are easy to connect using the M12 8-pole Ethernet CAT6A network cable (e.g. Metz Connect M12 Ethernet connecting lead, CAT6, 8-pole, x-coded or M12 SPEEDCON /IP67/X).
Connecting lead: The patch cable must be x-coded and is not included in the Stäubli delivery.
Excellent transfer performance and long-term stability
Change in resistance during cycles
Insertion and pull-out forces during mating cycles
Stäubli Units
Representatives /Agents
Global presence of the Stäubli Group
www.staubli.com
Assembly instructions MA203
www.staubli.com/electrical
Staubli is a trademark of Stäubli International AG, registered in Switzerland
and other countries.
We reserve the right to modify product specifications without prior notice.
© Stäubli 2022. ec.marcom@staubli.com | Photo
credits: Stäubli
References
- Innovative mechatronic solutions for higher productivity
- Electrical connectors for reliable, safe and durable solutions - Stäubli