OCPTY Power Adjusted Heated Towing Mirror Installation Guide
- June 9, 2024
- OCPTY
Table of Contents
OCPTY Power Adjusted Heated Towing Mirror
Installation Steps:
- Step1: First of all we need to remove the door trim there are two screw son the door card,one screw behind the door handle panel and also one screw in the door handle, thereafter removing the two screws remove the top cover and put your hands underneath the door trim and give it nice pull to remove it.
- Step 2: Remove the worn-out towing mirror. First, unplug the electrical connector and then remove the three bolts. After the screws are loosened, remove the towing mirror.
- Step 3: Start to install the new towing mirror. Before installing, install the three studs to the bottom of the mirror. After fixing the three studs, choose the correct position to install the mirror on the door. Make sure that the studs are aligned with the nuts and then tighten the screws
- Step4: After making sure that the three nuts are fixed, connect the connector and the towing mirror adapter together, and then install the door trim and top cover
What could be the reason why it cannot be used normally after installation?
The year, brand, and model of the new towing mirrors do not match your original. A wiring error occurred during installation. The mirror itself collided during transportation, causing some functions to be damaged.
The solution to the towing mirror not being used normally?
Please check if the year, make, and model of our towing mirrors are matched with your original ones; if matched, secondly check the towing mirror functions listed donor listings are consistent with what you want. Check if the wiring diagram is properly connected or incorrectly connected, reconnect it and try it again.And you can email us for a new wiring diagram, because the previous wiring diagram may be old. You can check which part is damaged. If the lens or small bulb is damaged, you contact our customer service and we will send you new accessories
Points to note before purchase and installation?
Please check the year, make, model, and functions of our towing mirrors are matched with your original ones; You can enter your make, model, and year into the list to check whether our products are compatible with your car. These two are compatible and incompatible states:
Follow the correct installation steps to install, and you can also search for related installation videos on the YouTube website. There are very detailed installation steps explained.
What should I do if I am not satisfied with the mirror after receiving the goods?
If you are not satisfied after receiving the goods, you can contact our customer service in time and tell us the reason for your dissatisfaction and we will try our best to give you a solution. For example, if the product is slightly damaged or the accessories are lost, we will send you a new one. In short, we will try our best to provide you with the best solution. Finally, if you are asking for a full refund, it must be received brand new and unused, or if the product is so damaged that it is truly unusable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>