Sdi Technologies CO-B48 Wireless Headphones User Guide
- June 5, 2024
- Sdi Technologies
Table of Contents
CO-B48 Wireless Headphones
**User Guide
XX-B48 IB (English)
Size: 120 x 150 mm
Printing color: Black (1C + 1C)
Material: 85 gsm wood Free paper
Jun. 23, 2022
** Model: CO-B48 Wireless Headphones
CHARGE BEFORE USE
CHARGING THE HEADPHONES – MUST ALWAYS BE CONDUCTED BY AN ADULT
POWER ON/OFF
– Press and hold the Power/Bluetooth Pairing Button for 2 seconds to turn the
headphones ON.
– Press and hold the Power/Bluetooth Pairing Button for 3 seconds to turn OFF.
VOLUME SWITCH
– Parents: slide the volume switch to select High, Medium, or Low. The unit is
factory set to Low, which is the recommended listening level.
MUSIC MODE – LISTEN TO 10 BUILT-IN SONGS
– Parents: slide the mode switch to select Music Mode. Press the Play Button
to listen.
BLUETOOTH PAIRING – MUST ALWAYS BE CONDUCTED BY AN ADULT
– Slide the Mode Switch to Bluetooth Mode. When the headphones are ON, they
will automatically enter pairing mode.
– Select `KIDdesigns B48′ on your Bluetooth-enabled device to connect.
– Headphones will automatically connect to your Bluetooth device whenever it
is in range.
To manually pair, press and hold the Power/Bluetooth Pairing Button for 5
seconds to enter pairing mode.
To reset Bluetooth, press the Power/Bluetooth Pairing Button 3 times while in
pairing mode.
CONTROLS
– Short press Play to play/pause. Short press Next/Previous Song to navigate
tracks.
– Press and hold Next Song Button to turn the volume up.
– Press and hold the Previous Song Button to turn the volume down.
Note: Headphones will automatically power OFF after 15 minutes of no activity.
AUX CABLE
– Use the included 3.5mm aux cable for optional wired listening. (Please use adult supervision when using an aux cable, greater than 300mm (12 in) for wired listening.)
LED INDICATORS
– LED flashes red/blue while in Bluetooth pairing mode, and flashes blue when
connected.
– LED flashes red when the battery is low, glows solid red while charging, and
turns solid blue when the headphones are fully charged.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
FCC Information
FCC ID: EMOB48A IC: 986B-B48A HVIN: B48a
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
- Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3(B)
ISED statements
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This device complies with ISED RF exposure requirements, users can obtain
Canadian information on RF exposure and compliance.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Tout changement ou modification non expressément approuvé par la partie
responsable de la conformité pourrait annuler le droit de l’utilidateur à
utiliser l’équipement.
WARNING: For your safety, do not use headphones if they would prevent you from hearing warning sounds, such as while riding a bike, crossing the street, etc.
IMPORTANT SAFETY INSTRUCTIONS
– Do not use or charge this product near a water source, and clean only with dry cloth. Do not block any ventilation openings. Keep product away from heat sources. Only use accessories specified by the manufacturer. Never leave unattended when charging.
GENERAL BATTERY PRECAUTIONS
– Never use or charge a battery if it appears to be leaking, or in any way
abnormal. Avoid charging the battery when the temperature is not within 5°C –
35° C (41° – 95° Fahrenheit). Never expose a battery to any liquid, or to
excessive heat such as direct sunlight or fire. Always keep batteries out of
the reach of infants and small children. Always charge lithium devices on a
non-flammable surface – wooden tables/ carpeted floors are not recommended
charging surfaces.
WARNING/DISPOSAL OF UNIT
– Do NOT attempt to change or disassemble the built-in battery. Doing so
will void the warranty and could cause personal injury and damage to your
device. Do not dispose of batteries in the household trash or fire. Always
dispose of used batteries/electronics in accordance with the prevailing
community regulations. To find a drop-off location near you, visit
www.call2recycle.com
THIS IS NOT A TOY.
B48_062322-A
©2022 All Rights Reserved.
Printed in China