StarTech US1GA30SFP USB 3.0 to Fiber Optic Converter User Guide
- June 5, 2024
- StarTech
Table of Contents
StarTech US1GA30SFP USB 3.0 to Fiber Optic Converter
USB 3.0 to Gigabit Ethernet Network Adapter – Open SFP
Package contents
- 1 x network adapter
- 1 x quick-start guide
Requirements
- USB-enabled computer with an available USB 3.0 port
- 1Gb SFP transceiver with your desired network connection
Operating system requirements are subject to change. For the latest requirements, please visit www.StarTech.com/US1GA30SFP
Product diagram
Installation
Notes: You may need to restart your computer during the software installation process. Be sure to save any unsaved material before you install the software.
- Insert your 1Gb SFP transceiver into the SFP slot on the card.
- Connect a network interface cable to the SFP transceiver and to your network.
- Connect the built-in USB 3.0 cable on the network adapter to a USB port on your computer.
Note: If the driver for the network adapter installs automatically, the installation is complete. If the driver does not install automatically, you’ll need to manually install the driver. Follow the instructions below for your specific operating system.
Windows
-
If the Found New Hardware dialog box appears on your screen, close the dialog box or click Cancel.
Note: Once the network adapter is connected to the computer, if no existing drivers are found, it will load a CD-ROM device that contains an executable file that you can use to install the driver. -
After the CD-ROM device finishes loading, run the installation file.
-
Complete the on-screen instructions to complete the installation. Note: You can also download the latest software from the StarTech.com website, www.StarTech.com/US1GA30SFP
macOS
- Download the latest macOS drivers from the StarTech.com website, www.StarTech.com/US1GA30SFP
- The drivers will be compressed in a .zip folder, extract the contents of that folder to a location on your computer that’s easy to access, such as your Desktop.
- Double-click the appropriate installer file for the version of macOS that you’re running, and follow the on-screen instructions to complete the installation.
About the LED indicators
The network adapter features two LED indicators:
- The Power LED illuminates to indicate that the adapter is receiving power.
- The Link and activity LED illuminates solid to indicate a network connection link and blinks to indicate that data is being sent or received.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by StarTech.com could void the
user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
Safety Measures
- If product has an exposed circuit board, do not touch the product under power.
References
- StarTech.com | IT Pro's Trusted Source for Connectivity Accessories | Europe
- USB 3.0 Fiber Optic Converter SFP Adaptr - USB and Thunderbolt Network Adapters
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>