LIGHTPRO Nilus 210S IP68 Spotlight User Manual
- June 9, 2024
- LiGHTPRO
Table of Contents
LIGHTPRO Nilus 210S IP68 Spotlight User Manual
Thank you for purchasing the Lightpro Nilus. This document contains the required information for correct, efficient and safe use of the product. Consult the user manual of your transformer for more information about the installation and connection of your lighting plan or visit our website www.lightpro.nl
Read the information in this manual carefully before using the product. Keep this manual near the product for consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Nilus is an LED lamp for outdoor use. The fixture can be mounted on a solid surface or placed in the ground with the supplied spikes. This product may only be used as outdoor lighting in combination with the Lightpro 12-volt system. Any alterations made to the product may have consequences for the safety, guarantee and correct functioning of the product and/or other parts of the system.
SPECIFICATIONS
Product Lightpro Nilus
Article number 210S
Light source LED 4W AC/DC 12V
Power (max) 4W
Luminous flux (max) 362 lm
Light colour 3.000K
Average lifetime 25.000
Dimensions (H x W x D) 129 x 95 x 109 mm
Protection class IP68
Ambient temperature -20 °C to 50 °C
Cable length 5m
Dimmable No
Light source Not replaceable
On/off 10.000
Packaging content
[Figure A] 1. Fixture Nilus
2. Screw
3. Plug
4. Caps
5. Lightpro connector
⚠ Check if all parts are present in the packaging. For questions about parts, service, and any complaints or other remarks, you can always contact us. E-mail: info@lightpro.nl
INSTALLATION
Placement on a fixed underground [Figure B] · Install the base onto the underground with the included screw.
⚠ If necessary, drill a hole in the underground and use the included plug.
INSTALLATION OF THE LIGHTS
- Install the products in the desired position and lay the cables so they can be comfortably connected to the transformer or main cable.
- If products are provided with a drain hole for water, this hole must be pointing downwards.
- Use non-corrosive fixing materials (supplied as standard) if you want to bolt the products down.
- Connect the lights to the main cable by using the connector as shown in figure on page 5.
- Consult the manual of your transformer for more information.
SAFETY
- Always fit this product so that it can still be accessed for servicing or maintenance. This product must not be permanently embedded or bricked in.
- Turn off the system by pulling the plug of the transformer from the socket for maintenance.
- Regularly clean the product with a soft, clean cloth. Avoid abrasives that can damage the surface.
- Clean products with stainless steel parts with a stainless steel cleaning agent once per six months.
- Do not use a high pressure washer or aggressive chemical cleaning agents when cleaning the product. This can cause irreparable damage.
- Protection class III: this product may only be connected to safety extra-low voltage up to a maximum of 12 Volt.
- This product is suitable for outside temperatures of: -20 to 50°C.
- Do not use this product in areas where combustible gases, fumes or liquids may be stored.
TECHMAR B.V. | CHOPINSTRAAT 10 | 7557 EH HENGELO | THE NETHERLANDS | WWW.LIGHTPRO.NL
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>