SABRENT EC-M2CU SATA III 2.5-Inch Enclosure Adapter User Manual

SABRENT EC-M2CU SATA III 2.5-Inch Enclosure Adapter

You can now turn your M.2 NGFF SSD drive into a 2.5″ SATA Ill or External USB 3.0 Enclosure with the Sabrent EC-M2CU. Exclusively designed for M.2 NGFF SSD B or B+M Key supporting 2242 (42mm), 2260 (60mm), and 2280 (80mm) size drives. Slim Aluminum casing, Plug & Play no driver install required.

OVERVIEW

1. SATA Interface
2. USB 3.0
3. M.2 SSD Slot
4. M.2 SSD Screw Holes

SETUP 1
Open the enclosure, connect your M.2 SSD B or B+M Key drive into the board, screw the drive in and close the case

SETUP 2
Screw in the sides and connect the USB 3.0 cable to the enclosure and to your computer
You can also connect it internally or externally using the SATA interface

WINDOWS PC HARD DRIVE WITH DATA/FILES

Click on the Start Icon located on the bottom left of the screen and then click on Computer

You should get a new drive letter every time you insert a hard drive with data/files

WINDOWS PC NEW HARD DRIVE SETUP CHARD DRIVE WITH NO DATA/FILES)

Click on the Start Icon located on the bottom left of the screen and then RIGHT click on Computer

Click on Manage

Click on Disk Management

Note: Disk O should be your internal hard drive
Disk 1 should be your external hard drive but SETUPS MAY DIFFER

RIGHT click on Unallocated and click on New Simple Volume

Go through the Setup Wizard to assign a drive letter

MAC OS HARD DRIVE WITH DATA/FILES

A new Icon should pop up on your main screen each time you insert a hard drive with DATA/Files

Click on the Icon to view your hard drive
Note: You can also click on the Finder icon and select your hard drive under Devices

MAC OS NEW HARD DRIVE SETUP CHARD DRIVE WITH NO DATA/FILESJ

Click on the Search icon on your toolbar

Type in Disk Utility and click on it

Click the icon for your external hard drive located in the sidebar on the left Click on the Erase tab at the top of the window

Select the volume format you want and give it a name

Notes

• This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds.
• Plug & Play no drivers required.
• Exclusively designed for M.2 NGFF SATA SSD B or B+M Key.

Computer does not recognize the drive?

• Make sure that you have a tight connection between the enclosure and 3.0 cable/ SATA cable.
• Try the USB cable on a different USB port on your computer.
• New hard drives must be setup, please review new hard drive setup for your OS.
• Swap out the hard drive with a spare.

Please contact our Technical Support Team for additional troubleshooting

WWW.SABRENTCOM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>