Jydepejsen Senza Wall Wood Fireplace Instruction Manual

Jydepejsen Senza Wall Wood Fireplace

Product Information: Senza Wall

Senza Wall is a wall-mounted stove that comes with or without side glass. It is suitable for mounting on fire-resistant walls without cracks. The stove requires a hole for the chimney and fresh air supply. The stove can be mounted using six screws approved for the wall type in question and capable of holding the weight of the stove. The product is recommended to be mounted by authorised  retailers only.

The product is available with or without side glass in different languages such as Danish, German, English, French, Swedish, Norwegian, and Dutch.

Specifications

• Model: Senza Wall
• Type: Wall-mounted stove
• Available with or without side glass

Product Usage Instructions

Assembly of Senza Wall
Before assembly, ensure that the wall is fire-resistant and without cracks. Contact a chimney sweep or a construction expert to ensure the suitability of the wall.

1. Make a hole for the chimney. If the stove is to be assembled with a rear fresh air outlet, a hole must be made for it as well.
   • Hole for chimney
   • Hole for fresh air supply
2. Use six screws approved for the wall type in question and capable of holding the weight of the stove. (Not included)
3. Raise the stove onto the fixed fittings. Use the supplied screws to attach the stove.
4. Adjust the stove when mounted on the wall. Use screws to secure the stove to the wall and keep it in the correct end position.

Supply of Combustible Air
The stove requires fresh air supply for combustion. The fresh air pipe must be connected to the fresh air connection piece. Depending on the installation, fresh air supply can be provided through the back wall or under the stove.

• Supply of combustible air through a BACK wall:
  • Make a hole in the back wall.
  • The fresh air pipe** goes into the hole and is connected to the fresh air connection piece.
  • The stove is mounted on fittings.
• Supply of combustible air under the stove:
  • The fresh air box must be unmounted.

**Fresh air nozzle through the rear wall must be purchased separately.

Assembly of Senza Wall

The stove is only suitable for mounting on fire-resistant walls without cracks.
Please contact the chimney sweep or a construction expert to ensure suitability of the wall. Jydepejsen recommends mounting of Senza Wall by authorised retailers only.
Senza Wall – Distance to combustibles WITHOUT insulated smoke pipe:

Senza Wall WITH side glass

Senza Wall WITHOUT side glass

Senza Wall – Distance to combustibles WITH insulated smoke pipe:

Senza Wall WITH side glass

Senza Wall WITHOUT side glass

Assembly

1. Make a hole for the chimney.
   If the stove is to be assembled with a rear fresh air outlet, a hole must be made for it as well.
   

2. 6 screws* approved for the wall type in question and capable for the weight of the stove must be used.

*Not included 3. Raise the stove onto the fixed fittings.

• Use the supplied screws to attach the stove.

4. Adjusting the stove when mounted on the wall

   • These screws must be screwed into the plate on the wall bracket.

   • The screws must be used to secure the stove to the wall and keep the stove in the correct end position.

Supply of combustible Air

Supply of combustible air through a BACK wall

• Make a hole in the back wall.
• The fresh air pipe** goes into the hole and is connected to the fresh air connection piece.
• The stove is mounted on fittings

NB!
Fresh air nozzle through the rear wall must be purchased separately.

Supply of combustible air under the stove

• The fresh air box must be unmounted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>