StarTech ST4300USBM 4 Port Industrial USB 3.0 Hub Wall Mounts Instruction Manual
- June 5, 2024
- StarTech
Table of Contents
StarTech ST4300USBM 4 Port Industrial USB 3.0 Hub Wall Mounts
Packaging Contents
- ST4300USBM hub x1
- USB 3.0 cable x1
- Universal Power Adapter x1
- Power Cord (NA/UK/EU) x3
System Requirements
- USB-enabled computer system with an available USB port
- Available AC power outlet (optional)
Installation
- Connect the included power adapter to the USB hub. The power LED should light up solid. Supplying external power is optional, however to ensure each USB port is fully powered, connecting external power is recommended.
- Connect the USB cable from the USB hub (type B port) to the host computer system.
- The operating system should detect the hub immediately and automatically install it.
- Once installation is complete, USB devices should be able to be connected to the hub and recognized. The USB Link LED should light up when a USB device is plugged in and detected.
Specifications
| __**Bus Interface** | USB 3.0 |
|---|---|
| __**Number of Ports** | 4 |
Connectors
____LEDs Maximum Data Transfer
Rate
| 4 x USB 3.0 type A female 1 x USB 3.0 type B female 1 x DC Power
__1 x Terminal Block 4 x USB Link
__1 x Power
USB 3.0: 5 Gbps
__**Enclosure Material| Metal
**Operating Temperature| 0°C ~ 55°C (32°F ~ 131°F)
** **Storage Temperature| -20°C ~ 85°C (-4°F ~ 185°F)
__**Humidity| 5% ~ 95% RH
__**D imension s Weight| __152.0mm x 59.6mm x
23.5mm 480 g
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service by
StarTech.com, or an endorsement of the product(s) to which this manual applies
by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need help with
your product, visit www.startech.com/support and access our comprehensive
selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement
with equivalent products at our discretion. The warranty covers parts and
labor costs only. StarTech.com does not warrant its products from defects or
damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
StarTech.com LLP
4490 South Hamilton Road
Groveport, Ohio 43125
U.S.A.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>