ROLLEI DF-S 1600 SE Slide Film Scanner User Manual

ROLLEI DF-S 1600 SE Slide Film Scanner Introduction

Thank you for purchasing the Rollei Slide Film Scanner DF-S 1600 SE. This product is for home use only. Easily convert your negatives and slides into digital images that you can save and store. Store your precious memories on an SD card (not included) or directly on your computer. You can also connect the slide film scanner directly to a TV to view the images.
This user manual is intended to provide you with guidelines to ensure that the operation of this product is safe and does not pose any risks to the user. Any use that does not comply with the guidelines described in this user manual may void the limited warranty.

Box Content

1. Slide film scanner
2. Negative holder
3. Slide holder
4. 110 mm film holder
5. 110 mm film inserter
6. 8 mm / super8 holder
7. USB-C cable
8. TV cable
9. HDMI cable
10. Power supply unit
11. Cleaning brush
12. Instruction manual

Product Overview

Front

1. LED light

2. Home button

3. On / Off button

4. LCD monitor

5. Function button

6. Record / Capture button 7 Holder slot
   Rear

7. SD memory card slot 9 HDMI output

8. USB-C port

9. TV out port

Note: The illustrations are for illustrative purposes only and may differ from the actual product.

Inserting Slides / Negatives

Important: Make sure your films / slides are clean and free of dirt and debris.

• Open the appropriate slide / negative holder and insert the negatives / slide. Each holder is labelled to identify it. If you are not sure which type of negative / slide it is, refer to the following illustrations.

Slide holder and inserter Negative holder and inserter

• Close the slide / negative holder and press the edges together until they click into place.
• Make sure that the slide / negative is facing the right way and is not bent. You can centre the slide / negative by manually aligning it to the left or right.

Using the Device

Getting started

Insert an SD card (not supplied) into the SD card slot on the back of the slide film scanner with the label facing up. The SD card will click into place when properly inserted.
Remove the SD card by pressing on it until it clicks into place and pops out, then remove it from the slot.
Note: This slide film scanner accepts SD, SDHC and SDHX cards with a maximum of 64 GB as additional memory. Format the SD card if it is not compatible with the machine. If you want to keep the contents of the SD card, store it in another location before formatting it.

Home screen

The home screen is displayed when the unit is turned on, when the home button [2] is pressed and each time SAVE / EXIT is selected.
Note: There is a difference between SAVE / EXIT and SAVE / BACK. SAVE / EXIT: Takes you back to the home button [2].
SAVE / BACK: This takes you back to the submenu you are currently using. The home screen has 3 submenus: PLAYBACK, CAPTURE and SETTING.
Note: The unit automatically switches to record mode when you press the record button.

Recording Mode

Taking pictures
Press the function button [5] under the RECORD symbol on the screen to switch to capture mode. The loaded picture is displayed on the LCD monitor. Press the middle function button [5] or the Record / Capture button to preview the image.

1. Press the CAPTURE button to capture and save an image. 1. Press the CAPTURE button to capture and save an image.
   Note: An error message is displayed on the LCD monitor for 3 seconds.

   • If the SD card is full, ”ERROR: MEMORY FULL“ is displayed.
   • If no memory card is inserted, ”ERROR: NO SD CARD“ appears.

2. Press any function button [5] to display the status bar at the top of the screen.
   Note: The status bar will disappear after 15 seconds, or press the CAPTURE button to return to preview mode.

   • Press the left / right function button [5] to select the top settings.
   • Then press the function button [5] under SELECT to apply the selected setting.
   • By selecting , gives you a preview of the current picture.
   • By selecting you can flip the current picture horizontally.
   • By selecting you can flip the current picture vertically.
   • By selecting , takes you to the menu to set the EV, RGB or Sharpness values.

Adjusting brightness, colour and sharpness

1. Press the left / right function button [5] to select , then press the centre  function button [5] (under SELECT) to enter the COLOUR SETTING..
   Under COLOUR SETTING there are 5 settings:
   EV= Brightness, R= Red, G= Green, B= Blue, SHARPNESS and RESET= Default setting for Brightness, Colour and Sharpness.

2. Press the right function button [5] to select the desired setting (use EV as an example), then press the centre function button [5] (under ADJUST) to enter the adjustment menu.

3. Press the left (-) / right (+) function button [5] to make the adjustment, then press the function button [5] (under SAVE / BACK) to save the adjusted data and return to the submenu, and press the right function button [5] to select another setting.
   Note: The settings will be reset to the default setting of ”0“ after the slide film scanner is restarted.

Setting Mode

Press the function button [5] (under SETTING) on the home page to enter SETTING MODE; there are 6 settings in this mode:

• FILM TYPE
• RESOLUTION
• TV STANDARD
• USB-UPLOAD
• FORMAT
• LANGUAGE Press the left/right function button [5] to select the desired setting and then press the centre function button [5] (under SELECT) to enter the submenu.

FILM TYPE
The film type includes the following film/slide formats:

• NEGATIVE: 135, 110, 126KPK
• SLIDE: 135, 110, 126, SUPER8, 8MM
• BLACK / WHITE: 135, 110, 126KPK

1. Press the left/right function button [5] to select FILM TYPE in the settings menu, and then press the function button [5] (under SELECT) to display the FILM TYPE menu.
2. Press the right function button [5] to select NEGATIVE, DIA, BLACK-WHITE (use NEGATIVE as an example), select NEGATIVE and press the function button [5] (under SELECT) to open the negative submenu.
3. Press the right function button [5] to select the film format (135, 110,126),CX select 135 (use for example 135) and press the function button [5] under SELECT to access the required holders and insert information. The display disappears after 5 seconds, saves the selection and takes you to the start menu.

RESOLUTION

1. Select RESOLUTION from the Settings menu, then press the Function button (under SELECT) to access the RESOLUTION menu.
2. Press the right function button [5] to select 16M or 25M (M= megapixels), then press the function button [5] (under SAVE / EXIT) to exit the menu.

TV STANDARD

1. Select TV STANDARD from the Settings menu, then press the Function button (under SELECT) to enter the TV STANDARD menu.
2. Press the right function button [5] to select PAL or NTSC, then press the function button [5] (under SAVE / EXIT) to enter the menu.

USB-UPLOAD

In this mode you can access your SD card from your computer.
Note: While connected to a computer, you cannot use the slide film scanner.

1. Use the supplied USB-C cable to connect the slide film scanner directly to a computer.
2. Select USB-UPLOAD from the settings menu, then press the function button [5] (under SELECT) to enter the USB-UPLOAD menu. Wait for the slide film scanner to connect to the computer. This may take a few seconds. When the connection is established, the computer recognises the slide film scanner as an external device.
3. When you are finished, press the disconnect button and then disconnect the USB-C cable.

FORMAT

Note! If you format the inserted SD card, all files on that card will be deleted. Save the files you need on your computer before formatting. If the SD card is not compatible, format it on your computer.

1. Select FORMAT from the settings menu, then press the function button [5] (under SELECT) to enter the format menu.
2. Press the Function button (under YES) to format the inserted SD card and go to the HOME menu.
3. Press the function button [5] (under NO) to return to the current card submenu. return to the current submenu of the card.

LANGUAGE
You can choose from these languages:

• German, English, Spanish, Italian, French, Portuguese, Dutch, Czech, Polish, Hungarian, Swedish, Danish, Finnish, Japanese

1. Select LANGUAGE from the settings menu, then press the function button [5] (under SELECT) to enter the language menu.
2. Press the right function button [5] to select the language you want.
3. Press the middle function button [5] (under SAVE / EXIT) to save the selected language and return to the start menu.

Playback Mode

1. Press the Home button [2], then press the Function key under PLAY to enter playback mode.
2. Press the Function button left / right to scroll through the pictures.
3. If you want to edit an image, press the centre function button [5] (under SELECT) when the image appears on the screen.
4.  Press the right function button [5] to select ROTATE, MIRROR, DELETE and DIASHOW. Press the centre function button [5] (under SELECT) to call up the selected output.
   • Select , then press the centre function button [5] (under SELECT) to set the rotation.
   • Select , then press the centre function button [5] (under SELECT) to enter the horizontal mirroring / vertical mirroring setting.
   • Select , then press the centre function button [5] (under SELECT) to enter delete mode.
   • Select , then press the centre function button [5] (under SELECT) to enter slide show mode.

Playback Mode

ROTATE

1. Enter the ”Rotate” setting as described above.
2. Use the left / right function button [5] to rotate the picture.

MIRROR

1. Enter the setting for horizontal mirroring / vertical mirroring as described above
2. Press the left function button [5] to flip the image vertically (B).
3. Press the right function button [5] to flip the image horizontally (A).

DELETE

1. Enter delete mode as described above.
2. Press the right function button [5] (under YES) to delete the current picture and enter the picture preview mode
3. Press the left function button [5] (under NO) to go to the start screen.

DIASHOW

1. Enter the slide show mode as described above.
2. Press the centre function button [5] to pause / play the  next saved picture.
3. Press the left function button [5] (under BACK) to return to the start screen.

Technical Data

Supported film types

Automatic conversion

| Colour negative film: 135, 126, 110 mm | Black / White, negative film:

135, 126, 110 mm | Slides: 135, 126, 110, 8 mm, Super8

Exposure control| Automatic, with 7 steps manual adjustment
Colour balance| Automatic, with 7 levels of manual adjustment
Scan quality| 3300 dpi, 4300 dpi (interpolated) for 135 mm film
Data conversion| 10 bits
File output| JPEG
Light source| Backlight (4 cool white LEDs)
External memory| SD / MMC compatible (up to 64 GB SDHC)
Power supply| DC 5 V      1 A adapter
Power supply unit| Manufacturer Cullpower, Model: SAW06B-050-1000G

Input: 100 ~ 240 V / 50 / 60 Hz / 0 .3 A | Output: 5 V         1 A / 5 W

Connections| UVC, TV-out PAL / NTSC (3.5 mm jack), HDMI,

USB-C connector / adapter connector

Dimensions| 10 x 9 x 18,2 cm
Weight| 513 g
Languages| German, English, Spanish, Italian, French, Portuguese, Dutch, Czech,

Polish, Hungarian, Swedish, Danish, Finnish, Japanese

Box content| Slide film scanner, negative holder, slide holder, 110-mm film holder,

110 mm film inserter, 8 mm / super8 holder, USB-C cable, TV cable, HDMI cable, power supply unit, cleaning brush and operating instructions

Technical details are subject to change without notice. Misprints and errors excepted. Reproduction of these operating instructions – even in part – is not permitted. *interpolated

Safety Instructions

• Warning: This product contains small parts and is not suitable for children under 3 years.
• Warning: Do not attempt to disassemble or modify this appliance. This appliance does not contain any user-serviceable parts.
• Important. Do not expose this product to liquids or high humidity.
• Do not handle the unit with wet hands. There is a risk of electric shock.
• Do not block any ventilation openings.
• Do not operate this appliance near any heat sources such as radiators or stoves.
• Do not move the unit or disconnect it from the computer while the unit is reading or writing data. This may cause damage to the data and/or the unit.
• Remove all packing materials before using the unit. Keep all packing materials out of the reach of chil-dren and pets.
• Always switch off and unplug the device when not in use. Disconnect the USB-C cable from your compu-ter and unplug the power adapter from the wall socket.
• Dispose of all packaging materials immediately after unpacking the product, as the bags used for packa-ging could pose a choking hazard.

Disposal

Dispose of the packaging according to its type. Use the local possibilities for collecting paper, cardboard and other materials (applicable in the European Union and other European countries with systems for the separate collection of recyclable materials).
Devices that are marked with this symbol must not be disposed of with household waste! You are legally obliged to dispose of old devices separately from to dispose of household waste. Information on collection points that accept old appliances free of charge can be obtained from your local authority or town council.

Conformity

Rollei GmbH & Co. KG that this device complies with the following directives.

2014/30/EU EMC Directive 2014/35/EU Low Voltage Directive 2009/125/EC ERP Directive 2011/65/EU RoHs Directive

The full text of the EU Declaration of Conformity is available at the following internet address: http://www.rollei.com/egk/dfs1600se
Rollei GmbH & Co. KG In der Tarpen 42 22848 Norderstedt GermanY

References

• cewe - best in print
• Rollei: Der Online-Shop für Kamera- Video- und Foto-Equipment – Rollei

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>