SABRENT DS-SC5B USB 3.2 5 Bay 3.5 Inch SATA Hard Drive Tray Less Docking Station Installation Guide

SABRENT DS-SC5B USB 3.2 5 Bay 3.5 Inch SATA Hard Drive Tray Less Docking

Station

FEATURES

• USB 3.1 Gen 2 Type-C port with up to 10Gbps transfer speed.
• 5x SATA 6Gbit/s 3.5″ hard drive bays.
• High-quality aluminum for optimal heat dissipation and structural integrity.
• Hot-Swappable with 5 independent ON/OFF power switches.
• Locking key to prevent accidental bay opening, fully tray-less design.
• Additional USB Type-C rear port allows you to connect other USB devices, or to
• daisy-chain another multi-drive docking station.
• Buil-in 120mm fan for additional cooling power.
• Built-in Kensington security slot.
• Auto-Switching internal power supply: 100 to 240 volts
• Main ON/OFF power switch.
• Fully backward compatible with USB 3.0/2.0/1.1.
• NOTE: This multi-bay station does NOT do RAID arrays on its own.

SYSTEM REQUIREMENTS
Windows/ Mac 0S/ Linux

PACKAGE CONTENTS

• A. Sabrent 5-bay Hard-Drive tray-less docking station
• B. USB Type-C to Type-A cable
• C. USB Type-C to Type-C cable.
• D. Power cable.
• E. Locking Key
• F. This quick installation guide

FRONT PANEL DETAIL

• * A. Independent Power Switch

  • B.Status LED
  • C. Door Lock
  • D. Door Handle
  • E. Hard Drive Slot
• BACK PANEL DETAIL
  • F. Kensington Security Lock slot.
  • G. USB Type-C 3.1 Generation 2 port- Connect to computer
  • H. USB 3.1 Generation 2 Hub- Connect to any USB peripherals.
  • I. 120mm cooling fan.
  • J.Auto-Switching 100-240V AC power input.
  • K. Main power switch.

LED INDICATOR REFERENCE TABLE

Hard Drive inserted and Power ON| BLUE/ SOLID
Hard Drive not inserted and Power ON| OFF
Accessing Hard Drive| PINK/ FLASHING
Hard Drive Error| OFF
Hard Drive Ejected from PC/ PC Power OFF| RED/ SOLID
Independent Power ON| OFF
Main Power OFF| OFF

HDD INSTALLATION PROCEDURE

• Step 1: Pull the door handle on the front panel to open each individual hard drive bay.
• Step 2: Carefully insert hard drive into slot
• Step 3: Close the slot door and make sure it clicks into place. Use the locking key to avoid accidentally opening the bay (optional).
• Step 4: Connect the Sabrent docking station to your computer using the USB Type-C cable. Depending on your computer, you can also use the USB Type-A cable. Connect it to MAIN.
• Step 5: Connect the power cable from your wall outlet to your docking station’s 100-240V
• AC power input.
• Step 6: Turn on the main power switch on the back of the unit. Turn ON/OFF each hard drive individually with the switches on the front panel.
• Step 7: (Optional) Connect any USB peripherals to the USB HUB port on the back of the docking station.

NOTE :

• Always use your operating system’s EJECT HARD DRIVE function before removing a disk, turning off your docking station, or opening any hard drive bay.
• This multi-bay station does NOT do RAID arrays on its own. You can still do RAID arrays via software. For instance, using Microsoft Storage Spaces.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>