MiBOXER FUT066 RGB+CCT LED Recessed Ceiling Downlight User Manual

MiBOXER FUT066 RGB+CCT LED Recessed Ceiling Downlight

Features

• 16 Millions of colors to choose
• Color temperature: 2700K-6500K
• Dim brightness/ Saturation
• 2.4G RF wireless transmission technology
• Signal transmitting & Modes synchronization
• Remote control Control distance 3Om
• Smartphone app control (2.4GHz gateway is needed)
• Support third party voice control (2.4GHz gateway 1S needed)

12W RGB+CCT LED Downlight

• Model No.: FUT066
• Input Voltage: AC100-240V 50/60Hz
• Working Temp.: -20-60°C
• CRI: >80 PF: >0.5
• Luminous Flux: 1100LM
• Light Efficiency: 88LMNJ
• Color Temp.: 2 700K-6500K
• Lifespan: 50000 hours
• Beam Angle: 120°
• RF: 2.4GHz
• Control Distance: 30m
• Material: Aluminum+PC Cover
• Product Weight: 320g

Instructions

1. Please open the hole on the ceiling according of Diagram 1. ( For the size of the hole, please refer to the parameters of the corresponding model. )
2. Connect the driver properly according to the wire connection Diagram 2. And then put the driver and wire into the ceiling from the hole.
3. Push in the two spring elements, make sure that they are deployed and anchored on the back of the ceiling Diagram 3 and 4.

Link/Unlink

Compatible with these remote controls (Purchased separately)

NOTE:
Lighting can be working after linking with remote; for more details, pls read the remote instruction.

Dynamic Mode Sheet

Adjustable

2| Automatic color change
3| Sam
4| Gemstone
5| Twilight
6| American
7| Fat Tuesday
8| Party
9| Slow Color Splash

Signal transmitting

One Downlight can transmit the signals from the remote control to another Downlight within 30m, as long as there is a Downlight within 30m, the remote control distance can be limitless.

Modes synchronization
Different Downlight can work syrnchronously when they are started at different times, controlled by the same remote, under same dynamic mode and within 30m distance.

Attention

1. When install the lighting fixtures, pls switch off the power to make sure the safty.
2. Please check whether the input voltage supply is in accordance with the lighting fixtures.
3. Non-professional user cannot dismantle the lighting fixtures directly, otherwise, it may cause fire and electric shock.
4. Please do not use lighting fixtures around the mental area and high magnetic field, otherwise, it will badly affect the control distance

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>