Rollei Actioncam 11s Plus User Guide

Actioncam 11s Plus

USER GUIDE

www. rollei.de

INHALT

Before the First Use

Read the operating instructions and the safety instructions carefully before using the device for the first time.
Keep the operating instructions together with the device for future use. If other people use this device, make this manual available to them. If you pass on the device to a third party, this manual belongs to the device and must be supplied with it.

Explanation of Symbols

The following symbols are used in this manual on the packaging.

Products marked with this symbol comply with all relevant community regulations of the European Economic Area.

Products marked with this symbol are operated with direct current.

What‘s in the Box

1x Rollei Actioncam 11s Plus
1x rechargable battery
1x camera cage
1x underwater housing
1x USB-C cable
3x camera mounts
2x stickers
1x user manual

Attention

1. This product is a delicate product, do not drop or hit it anywhere.
2. Do not place the camera near to streng magnetism, such as magnets and motors. Avoid to place the product near anything emitting strong radio waves, a strong magnetic field may cause the product to malfunction or damage the image and sound.
3. Do not place the camera at high temperatures or direct sunlight.
4. Use brand Micro SD cards as ordinary cards do not guarantee the proper use.
5. Do not use Micro SD cards in or near magnetic places to avoid lass of data.
6. During the charging process, if there is overheating, smoke or odor, unplug the power immediately and stop charging to avoid fire.
7. Keep away the camera and its accessories from children to avoid choking or electric shocks.
8. Store the product in a cool and dry place.
9. Do not use the camera when it is low power or in charging.
10. Do not attempt to open or modify the camera housing in any way as this will invalidate the warranty.

Technical Data

2.7K 2704 x 1520 at 30 fps
1080p 1920 x 1080 at 60 / 30 fps
720p 1280 x 720 at 120 / 60 fps
Still image resolution| 20 M: 5120 x 3840 4:3
16 M: 4640 x 3480 4:3
14 M*: 4320 x 3240 4:3
10 M: 3648 x 2736 4:3
8 M: 3264 x 2448 4:3
5 M: 2592 x 1944 4:3
2 M: 1600 x 1200 4:3
Display| 2“ touchscreen display and 1.4“ selfie display
Data format| Video: MOV (H.264) I Photo: JPG
Memory| MircoSD card up to 64 GB
Connectors| USB-C, Micro HDMI
Waterproof| Camera body waterproof up to 7 meters, in underwater housing waterproof up to 30 meters
Microphone| Built-in microphone
Additonal Features| White balance, webcam function, electronic image stabilization
Modi| Video: Normal, Slow Motion, Loop Recording, Time Lapse, Fast Motion
Photo: Single shots, Continuous shots, Self-timer, Time-lapse, Long time exposure
WiFi| iEEE 802.11 / b / g / n 2.4 GHz
Max. transmission power| 10 dBm
Battery life| Up to 85 min. at 4K resolution
Power| Li-Ion battery 3.7 V / 1,000 mAh / 3.7 Wh
Input| DC 5 V 2 A
Operating temperature| -10° – 60° C
Size| 6.6 x 4.4 x 3.3 cm
Weight| 131.4 g / 110.2 g (incl. / excl. battery)
Box content| 1x Rollei Actioncam 11s Plus, 1x rechargable battery, 1x camera cage, 1x underwater housing, 1x USB-C cable, 3x camera mounts, 2x stickers, 1x user manual

Technical details are subject to change without notice. Misprints and errors excepted.
Reproduction of these operating instructions – even in part – is not permitted. *interpolated

Camera Description

1 Selfie / Front Display
2 Lens
3 Built-In Speaker
4 Micro HDMI Slot
5 USB-C Slot
6 Battery compartment and Micro SD Slot
7 Built-In Microphone
8 Shutter / Select Button
9 Power / WiFi Button
10 Mode Button (press for 3s – change to front display)
11 Operation Indicator
12 Charging Indicator
13 Touch Display Screen

Waterproof Case

– Insert Camera into Waterproof Case

1. Ensure the case is clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. The camera can be mounted using the accessories provided.

Battery

Before using the device for the first time, you must fully charge the battery.

– Charging the Battery

1. Connect the camera to a computer or USB power supply (DC 5 V 2 A).
2. The charging status light turns on while the battery is charging.
3. The charging status light turns off when the battery is fully charged.

– Changing the Battery

1. Hold the camera so that you can see the camera display and slide the battery cover to the right to open the battery compartment.
2. Remove the battery.
3. Insert the new battery so the contacts line up with those of the camera.

Note: Operation is also possible while charging (e.g. via a power bank).

Getting Started

– Turn On: Press and hold the Power / WiFi Button for 3 seconds. When the camera is turned on, the Operation Indicator turns on.
– Turn Off: Press and hold the Power / WiFi Button for 3 seconds.

Modes of the Camera

The Rollei 11s Plus offers various photo and video modes. In the following we give you a short explanation of how they work. On the following pages you can find detailed descriptions how to change the settings for each mode.

– “Normal” video mode: You can record a single video with normal speed.
– “Seamless” video mode: Here you can record in a loop. The loop recording can be set in an interval of 1 or 5 minutes. After this interval, a new recording is made and saved in each case. If the memory card is full, the recordings made so far will be overwritten.
– “V-Timelapse” video mode: In timelapse video mode the camera takes pictures every 0.5 seconds up to every minute and creates a video out of that. You can choose the video length from 5 minutes up to 30 minutes or endless.
– “SlowMotion” video mode: The camera records a sequence and replays it in slowmotion.
– “FastMotion” video mode: Here the camera replays the video faster than recorded, from double time up to 15 times faster. Compared to time-lapse video mode, these recordings are a little slower.
– “Single” photo mode: You can take a single shot.
– “Burst” photo mode: This allows you to take 3 shots / 1s, 7 shots / 2s, 15 shots / 4s, 30 shots / 8s.
– “P-Timelapse” photo mode: In timelapse photo mode the camera takes pictures every 0.5 seconds up to every minute for 5 to 30 minutes or unlimited.
– “CountDown” photo mode: You can set a timer on 2 or 10 seconds delay
– “LongExp” long exposure photo mode: It uses a long-duration shutter speed to sharply capture the stationary elements of images.
– Date Stamp: You can add a watermark to your pictures or videos, either with just the date or with date and time.

Touch Function

You can use the rear touch screen to access the functions of the camera.

– Swipe to the left or right to change between the video mode and the photo mode.

In the video or photo mode you can access the playback mode via the symbol in the left lower corner (1) and the settings with the symbol in the right lower corner (3). To access the mode menu, touch the lower middle part (2).

– Swipe up to access the mode menu of video and photo.
– Swipe down to open shortcuts to lock and power off for quick operations.
– To unlock touch the display and swipe from left to right, following the arrows, or press the Shutter / Select Button.

Button Function

Overview Menu
To get access to the mode menu , press the Shutter / Select Button for 3 seconds. Cycle through the menu (see above) with the Mode Button , confirm with the Shutter / Select Button.

Video Mode
Press the Shutter / Select Button when power on to start recording. A red light on the screen will flash as well as the operation indicator while recording. Press Shutter / Select Button again to stop recording.

Photo Mode
Press the Shutter / Select Button to take a single picture.

You can choose between video mode, photo mode, playback mode and settings by pressing the Mode Button shortly. Access the playback mode or the camera settings by confirming with the Shutter / Select Button.
Cycle through the settings with the Power / WiFi Button and confirm with the Shutter / Select Button the requested options. Exit the menu with the Mode Button or by confirming the arrow back.

Settings

In the System Setting mode you can enter the settings for the system and choose different parameters for the camera. Please observe that the parameters will be activated depending on the chosen video / photo mode.

Parameters for the camera in video mode:
– Video resolution: Here you can set the resolution of your recordings.
– Video Quality: You can set the video quality between low, medium and high.
– Voice Record: When it is on, sound is recorded, when it is off, recordings are without sound.
– EV: You can set the exposure compensation between -2.0 (image becomes darker) and +2.0 (image becomes brighter) by tapping on the display.
– Image Stabilization: With Image Stabilization turned on, the video will be smoother.
– Loop Record: Here you can take shots of the duration of the interval again and again and save them individually.
– Timelapse Interval: You can set different intervals to determine the speed of the time lapse video.
– Timelapse Duration: You can determine the duration of your time-lapse recording here.
– Slow Motion Movie: You can turn this on or off. If this function is switched on, the playback of your recording depends on the resolution frame rate. The higher this is (up to max. 120), the slower you can play back the video.
– Fast Motion Movie: This function describes the FastMotion function, which gives you a 2 to 15 times played back recording.
– Wind Noise Reduction: This function improves your sound recording in the video and suppresses ambient noise.
– Auto Low Light: In low light conditions, this function is useful for brightening your image.
– Metering: Here you can set the image area on which the camera focuses, e.g. in the center (Center), at different points (Multi) or at one point (Spot).
– Date Stamp: Here you can give your images a date stamp or a date & time stamp.

Parameters for the camera in photo mode:
– Photo Resolution: Here you can set the resolution of your pictures.
– ISO: The ISO value can be adjusted automatically or set manually between 100 and 3200.
– EV: You can set the exposure compensation between -2.0 (image becomes darker) and +2.0 (image becomes brighter).
– Timelapse Interval: You can set different intervals to determine the speed of time lapse shooting.
– Timelapse duration: You can determine the duration of your time-lapse recording here.
– Photo Burst: Here you can set how many series pictures you want to take in one time sequence.
– Delay Timer: This function describes the self-timer that you can set here.
– Long Exposure: Here you can set the extended exposure time of the photo.
– Metering: Here you can set the image area on which the camera focuses, e.g. in the center (Center), at different locations (Multi) or at one point (Spot).
– Date Stamp: Here you can give your photos a date stamp or a date & time stamp.

System settings:
– Power Frequency: Set the frequency of your ambient light to get the best results.
– Sounds: Here you can turn on and off the shutter sound, boot up sound, and key beep sound, and vary their volume.
– White Balance: Set different white balance settings for optimal recordings. There is also a white balance for underwater shots.
– Effects: Here you can apply various filters to your images.
– Distortion Calibration: Use this function to straighten out the distortion at the edge of the image caused by the wide-angle lens.
– Date & Time: Set the date and time here.
– Display Flip: This function rotates the display 180° to allow the camera to be operated upside down.
– Screen Saver: Set to turn off the display automatically after a certain time.
– Auto Power Off: Sets the camera to turn off automatically after a certain time.
– Power On Auto Record: This function automatically starts recording a video directly when the camera is turned on with the previously set settings.
– USB: Set whether the camera is recognized as a removable disk (MSDC – mass storage device class) or webcam (PCCAM) when connected to a PC via USB.
– Language: Change the language of the camera menu here.
– Format Card: Format your memory card here, e.g. after a firmware update.
– System: Here you will find the function to reset the camera to factory settings, as well as information on the firmware (system info) and your memory card (card info).

Playback Video and Photo

In the playback mode you can preview the videos and photos taken.

– Playback Files on Camera: Make sure you selected the Video or Photo Playback menu on the camera. Press the corresponding symbol on the touchscreen or press the Power / WiFi button to cycle the videos or photos, then press the Shutter / Select Button to playback the videos.
– Delete Files on Camera: On the symbol for deleting files mark the requested file first by touch or by pressing the Shutter / Select Button for a couple of seconds, then again shortly and again for a couple of seconds, then choose the deleting options with the Mode Button. Confirm by pressing the Shutter / Select Button, choose yes or no option with the Mode Button and confirm again with the Shutter / Select Button.

Selfie Mode / Switch to the Front Display

To switch displays, press the Mode Button for 3 seconds.

Webcam function

The Actioncam 11s Plus can also be used as a webcam. To do this, set the “USB” item in the settings menu to “PCCAM”, make sure you insert a micro SD card and then connect the camera to your PC via USB. As a webcam, the camera has a full HD resolution of 1920 x 1080 px and a frame rate of 30 fps.

Note: Please note that you need a separate microphone for audio transmissions, as the internal microphone is not used for this function. The compatibility of the camera as a webcam also depends on the program used.

Connection of an External Monitor

You can connect an external monitor via the micro HDMI port. You can use all resolutions of the camera as resolution, as long as the monitor supports them.
Note: The camera does not support live online streaming.

Remote Control (not included)

With the remote control which can be bought separately you can operate the action cam from a distance. There are two shutter buttons, one for the photo mode and one for the video mode, which take a photo (1) or start and end the recording of a video (2).
Radio frequency of the remote control: 2.412 – 2.472 GHz; transmitting power: 10 dBm
Please note: the remote control is waterproof for a depth of up to 2 meters.

Storage / Micro Cards

This camera is compatible with up to 64 GB capacity Micro SD and Micro SDXC memory card. You must use a micro SD card with a U3 or V30 speed rating at least. We recommend using brand-name memory cards for maximum reliability in high vibration activities.

Please note:
– The memory card is not included in the standard package, you will need to buy an extra memory card.
– Please format the Micro SD or Micro SDXC memory card on the camera before using.
– Please restart the camera after formating.
– Please insert the memory card in the correct way, otherwise the card slot might get damaged.

WiFi Setting / Operation via App

You can connect the camera to your smartphone via the integrated WiFi function. Turn the camera on and swipe up on the touchscreen to turn on WiFi using the mode menu, or briefly press the Power / WiFi Button to activate WiFi. The camera‘s WiFi is activated, the power indicator blinks, and the WiFi information (network name and network password „1234567890“ ) appears on the camera‘s monitor. Then connect the camera to the smartphone by going to the WLAN settings of your smartphone, selecting the camera‘s network and connecting it. Download the free app „8s / 9s / 11s Plus Actioncam“ (Android version) from the Google Play Store or the iOS version „Rollei 8s / 9s / 11s Plus Actioncam“ from the App Store and install it on your smartphone. After installing it, open the app and select the camera network from the list. You will see the camera on the screen of your phone. To exit WiFi mode press the Power / WiFi Button shortly.

Here you can download the app:

Firmware Updates

If the firmware changes, we bring out new updates that you can download and install yourself from our product page in the “Downloads” area. You can find the current firmware version on your camera in the menu under System / System Info. To install an update, please copy the file with the extension.BRN to your micro SD card using a card reader. Disconnect the memory card from the PC and insert it into the camera. Turn on the camera and confirm the firmware update by selecting the “Yes” option with the Power Button and then confirming with the Shutter Button. After the update is complete, the camera switches off. Format the Micro SD card in the actioncam via the settings menu before using it again.

Disposal

Dispose of the packaging according to its type. Use the local possibilities for collecting paper, cardboard and other materials. (Applicable in the European Union and other European countries with systems for the separate collection of recyclable materials).

Devices that are marked with this symbol must not be disposed of with household waste! You are legally obliged to dispose of old devices separately from to dispose of household waste. Information on collection points that accept old appliances free of charge can be obtained from your local authority or town council.

Batteries and rechargeable accumulators must not be disposed of in household waste! As a consumer you are legally obliged to dispose of all batteries and accumulators, whether they contain harmful substances or not, to be disposed of in an environmentally sound manner. Accumulators and batteries are therefore marked with the symbol shown opposite. For more information, contact your dealer or contact return and collection points in your community.
marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead

Battery Warning

– Never dismantle, crush, or pierce the battery, or allow the battery to short-circuit. Do not expose the battery in high temperature environment, if battery leaks or bulges, stop continue to use.
– Always charge using the designated charger. Risk of explosion if battery is replaced by an incorrect type.
– Keep the battery out of reach of children.
– Batteries may explode if exposed to naked fire. Never dispose batteries in a fire.
– Follow your local regulations for disposing used batteries.
– Before disposing the device, remove the battery

Safety instructions

Hazards for children and persons with reduced physical, sensory or mental abilities (e.g. partially disabled, older persons with reduced physical and mental abilities) or lack of experience and knowledge (e.g. older children).
– This product can be used by children aged 14 and over. Cleaning and user maintenance must not be carried out by children without supervision.
– The packaging material is not a toy. Do not let children play with the packaging material. They can get caught in it and suffocate while playing.
– Supervise children to ensure that they do not play with small parts (screws, plugs, memory card, batteries / rechargeable batteries). If you suspect that a small part has been swallowed, consult a doctor immediately.
– Store small parts so that they are inaccessible to children and animals.

CAUTION! Risk of injury!
Improper handling of the product can lead to injuries.
– Remove the battery and, if necessary, the charging cable immediately if there are unusual noises or smells or smoke from the housing.

NOTE! Risk of damage to property!
Improper handling of the product can lead to damage.
– Never place the device on or near hot surfaces (e.g. hotplates etc.) or open fire. Never expose the device to excessive temperatures (heating, etc.).
– Never pour liquid into the unit.
– Never use a steam cleaner for cleaning.
– Do not use the unit if the plastic or metal parts of the unit have cracks or crazing or have become deformed.
– Handle the device with care. Impacts, falling or knocks can damage the device.
– Remove the battery if you are not going to use the product for a long period of time to prevent damage from a leaking battery.
– Only use the product in a temperature range between -10°C and +60°C. The product is suitable for use in a tropical climate.
– Do not modify the product.
– Never open the casing, leave the repair to qualified personnel. Contact a specialist workshop for this purpose. Liability and warranty claims are excluded in the event of repairs carried out independently, improper connection or incorrect operation.
– Do not operate the unit if it shows visible damage or defects.
– When not using the unit, cleaning it or if a fault occurs, always switch off the unit, remove the battery and disconnect all connections.
– If the product has problems due to static discharge, switch the device off and then switch it on again after about 10 seconds.

Conformity

The Rollei GmbH & Co. KG herewith declares, that the radio system type “Rollei Actioncam 11s Plus“ complies with the directive 2014 / 53 / EU

The complete text of the EU Declaration of Conformity can be downloaded at the following Internet address: www.rollei.com / egk / ac11splus

Rollei GmbH & Co. KG
In de Tarpen 4, D-22848 Norderstedt
Germany

Actioncam 11s Plus

Rollei GmbH & Co. KG
In de Tarpen 42
22848 Norderstedt

Service Hotline:
+49 40 270750277

/rollei.foto.de
@rollei_de

www. rollei.com

References

• This is the default server vhost
• FUTURO » Izdelava spletnih strani
• cewe - best in print
• Rollei ? Online shop for camera, video and photo equipment
• Rollei: Der Online-Shop für Kamera- Video- und Foto-Equipment – Rollei

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>