StarTech 4 Port Black SuperSpeed USB 3.0 Hub User Guide
- June 5, 2024
- StarTech
Table of Contents
4 Port Black SuperSpeed USB 3.0 Hub
User Guide 
Product Diagram (ST4300USB3)
| Port| Function
---|---|---
1| Power LED| • Solid: Hub is receiving power.
2| USB-A Ports (4)| • Used to connect USB devices to the Hub.
| Port| Function
---|---|---
3| Power Port| • Used with the Power Adapter, to power the Hub.
4| USB-B Port (Host)| • Used to connect the Host Computer to the Hub.
Requirements
For the latest requirements, please visit www.startech.com/ST4300USB3, www.startech.com/ST4300USB3EU, or www.startech.com/ST4300USB3GB
Installation
-
Connect the included power adapter to the USB hub. The power LED should light up solid. Supplying external power is optional, however, to ensure each USB port is fully powered, connecting external power is recommended.
-
Connect the USB cable from the USB hub (type B port) to the host computer system.
NOTE: If connected to a USB 2.0 host port, the hub will only operate at USB 2.0 speeds. -
The operating system should detect the hub immediately and automatically install it.
-
Once installation is complete, USB 1.x/2.0/3.0 devices should be able to be connected to the hub and recognized.
Specifications
| Bus Interface | USB 3.0 |
|---|---|
| Number of Ports | 4 |
| Connectors | • USB-A x 4 |
• USB-B x 1
• DC Power x 1
LEDs| Power x 1
Maximum Data Transfer Rate| USB 3.0L 5 Gbps
Enclosure Material| Plastic
Power Adapter| 5VDC, 2000mA, type M plug
Operating Temperature| 0°C~55°C (32°F~131°F)
Storage Temperature| -20°C~85°C (-4°F~185°F)
Humidity| 5%~95% RH
Dimensions| 152.0mm x 59.6mm x 23.5mm
Weight| 480g
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
For the State of California
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 0.5cm between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are
for illustrative purposes only and do not represent an endorsement of a
product or service by StarTech.com, or an endorsement
of the product(s) to which this manual applies by the third-party company in
question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained
in this manual and related documents are the property of their respective
holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall it be the liability of StarTech.com Ltd. and StarTech.com
USA LLP (or their officers, directors, employees, or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Safety Measures
- If the product has an exposed circuit board, do not touch the product under power.
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road Groveport, Ohio
43125 U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd, Brackmills
Northampton NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
---|---|---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>