iPower BTech iPhone Battery Case Wi-Fi Installation Guide

iPower BTech iPhone Battery Case Wi-Fi

Phone Installation

This Battery Case is extremely easy to instal and use.simply take off the top cover of the battery case and side your phone into the case.

Notes for installation and disassembly
Remember not to break the phone, so as not to damage the interface

The designed buffer allow the phone been installed with other protection layer

Charge the Power

• A. Can charge the battery via both available exist Micro USB and USB Type C ports with cable connect to the outlet. Blue LED Indication (Power on & Power Level indication)
• B. The blue LED will keep flash while charging, once complete the charge the full 4 blue LED will keep light on still then.

Power On and Off

• A. Power on the device by pushing the power button once, while pushing twice to power off
• B. The Blue LED indication light on/ff according to the power on/ff. The number of the LED been light on show the left power capacity level of the device.

Shooting Direction

While put the phone on table need to face down the phone screen to shoot for having the proper shooting angle.

Install the App and connect the wifi

Find and download the app name “HDlivecam” in iOS App store or Google Play to install. Or scan the QR code link below to download and install.

Find the Care-Apxxxxxxxxxxx in your WIFI signal list to connect then open the app to preview, control and setup the camera, then run the app and sign up with your Apple ID or Google Account.

Dual Recording in Safety

• A. Saved in the SD card (Into the Device) As long as power on the device and preview the camera view from the app it will start to record all the way automatically until the device been powered off.
  • Remark: Make sure to check the memory card and battery Power Capacity status If the motion record function been enabled This part will automatically go to the motion record Mode all the time.
• B. Saved in the memory (Into the Phone) Manually push the recording button to record the event scenario you want on the preview menu on half or full screen.

Recording Resolution Setup

• A. Resolution setting for the file saved in device’s memory.
• B. Resolution setting for the file saved in phone’s memory.

Play back the automatically saved video file in the devices

• A. Play back the files saved in device’s memory
  • It could fast browse the saved video or search by time/date line to watch from the app preview , before downloading them.
  • Then select the event occurred period video to download to your phone memory.
  • All video will be saved as files, each interval as 5 minutes as default.

Play back the manually saved video file in the phone

Remark:

• A. Only the way can call out the local saved file folder as more safety cause.
• B. The local saved file folder is also the downloaded files from the device will be saved to.

Motion Detection Enable Setup

Enable the Motion Detection setup to save

Adjustment of the parameters

• Sensitivity
• Alert Time
• Alert Frequency
• Siren

Once open motion detection function will enable the loop recording automatically.

Schedule Recording Function Enable Setup

• A. Set the timer in the setup menu.
  • Adjust the timer to start and stop to record.
  • It could set various timers to record.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>