iTalkBB AH6W AIjia Camera User Guide

iTalkBB AH6W AIjia Camera

We are available 24/7.

For United States and Canada, 877-482-5503">1-877-482-5503 For Korean Customer Service, 1-800-875-8318">800-875-8318 Korean Customer Service 06:00-22:30 PST

We are also availabel on WeChat

Our customer service is also available on WeChat! Search iTalkBB on WeChat, and chat with us! For more information, please visit www. iTalkBB.com.

In The Box

• Camera
• Wall Mount
• Pre-install Battery
• Camera Power Adaptor
• Camera Charging Cable
• Screw Kit
• Quick Start Guide
• Warning Sign

Basics of camera

• The best area for motion detection is 5 feet to 25 feet (1.5 to 7.5 meters) from the camera.
  2.5m

• Secure the magnetic mount with screws

• Attach the camera to the magnetic mount.

Note: Prolonged direct sunlight can heat the inside of your camera past its maximum operating
temperature of 122°F (50°C). Avoid directly sunlight where possible and only use your camera in
environments within its operating temperature range: -4°F to 122°F (-20°C to 50°C).

Setup your camera

• Download the AIjia app and create an account.
  Note: If you already use the iTalkBB Aijia app, please make sure that you are using the latest
  version. To nd out if an update is available, go to the app store and search for iTalkBB AIjia.

• Follow the AIjia app to set up the base station.

• Follow the AIjia app to set up the camera.
  Note: Please fully charge the battery before using it.

Setup your camera

• Place your camera in a location with a clear, unblocked eld of view.
  Your camera provides a 120° viewing angle, so place the camera to cover a desired area.

It is recommended to install at a height of 2.5m from the ground, with the fuselage tilted down by 20°.

Battery
When using the camera for the rst time, be sure to fully charge the battery.

• Charge the battery

1. Make sure the battery is inserted into the camera
   

2. . Connect the camera to a power outlet using the power adapter (5V,2A).
   A camera will be blinking red when being charged.
   

3. It usually takes about 5-6 hours to fully charge the battery. Once a camera is fully charged, indicator light will be solid red.
   Note: The app will notify you when it detects a low battery level

Light Indications

• Solid yellow light
  The device is powered on and initializing

• Flashing yellow & blue lights
  The device is pairing with the base station

• Solid blue light
  The device is working properly

• Flashing blue light
  The device is connecting to the network

• Solid red light
  The device is fully charged

• Flashing purple light
  The device is upgrading

• Solid purple light
  Something went wrong with the rmware

• No indicator light
  The device is powered or sleeping

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1.  This device may not cause harmful interference , and
2. This device must accept any interference received, including interference that may cause undesired operation

Note: This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause hermful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment and on, the user is encouraged to try to correct the interference by one or more
of the following measures：

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure  limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

• iTalkBB

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>