SWIT PB-C420S Li-ion V-Mount Battery User Manual

SWIT PB-C420S Li-ion V-Mount Battery

introduction

Thank you for choosing SWIT products, please read this user manual before using and keep it properly for future reference.

Warning
Remember the following precautions to avoid fire and other safety hazards!

• Do not expose to heat and never throw the battery in a fire to avoid over-heat,battery broken.

• Do not pierce or drill into the outer casing of the unit.

• Do not use outside of specified temperature ranges.

• Do not leave or charge the battery exposed to excessive heat such as in a car or directly under the sun light.

• Do not expose to heat and never throw the battery in a fire to avoid over-heat,battery broken.

• Do not pierce or drill into the outer casing of the unit.

• Do not use outside of specified temperature ranges.

• Do not leave or charge the battery exposed to excessive heat such as in a car or directly under the sun light.

Caution

• It is normal for the battery to heat up during charging and discharging.
• Always keep the connectors clean.
• The battery will still power down naturally during storage, store in cool and dry conditions,keep the capacity of battery between 25%-50%.
• Battery will get into sleep mode without using for 10 days,need to charge or press button to recover.

Charging

• Can be charged with SWIT PC-P461(6A Fast charging),SWIT
  S- 3812S (6A Fast charging), SWIT S-3822S, SWIT PC-P430S, SWIT SC-302S o

• The LED Indicator light will show the remaining power when charging (20%,40%,60%,80%,95%).

• The ambient temperature range for charging is -4~ 122° F
  (-20~50°C), however,14~104° F (-10~40°C) is recommended for optimizing the discharging performance.

Features

• 29.4Ah high capacity, power your device for long time.
• Two D-TAP ports for self-charging or external power supply.
• Five power status LED indicators accurately display remaining power capacity.
• There are four types of protection circuits to ensure the battery is protected from Over-charge,Over-dischagr, Over-current and Thermal protection.

Discharging

• Please put on the rubber cover immediately after use the D- tap to avoid dust
• The ambient temperature range for discharging is 32~ 104° F (0~40°C), however,50~86° F (10~30°C) is recom­mended for optimizing the discharging performance.

Appearance

1. LED Indicators
2. D-TAP Input/Output ports
3. Indicator button
4. V-mount
5. Main electrode

Capacity display LEDZ

• The LED Indicator light will show the remaining power when charging (20%,40%,60%,80%,95%).

Troubleshooting

u ** –  D**

��000

| If the battery is under discharge protection, try the following actions to recover:

1. Remove the battery and wait for the battery to recover by itself.

2. Please put the battery in the shade, after a few minutes of cooling, the battery will automatically recover; If the battery cannot be recovered after the preceding operations, it indicates that the battery is exhausted. Charge the battery as soon as possible.

---|---
u ** –  D**

000��

| 1. Remove the battery and wait for the battery to recover by itself.

2. please put the battery in the shade, after a few minutes of cooling, the battery will automatically recover;

3. Please remove the battery and try to recover it by discharging it.

u **D**

�

| The battery cannot be charged or discharged. Please put the battery in a cool place and wait for the core temperature to decrease (Recommended> 30 minutes). Then hang the battery on the charger and try to charge. If the battery is charged normally, the battery will return to normal.

Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>