CAL-ROYAL PST-201 Panic Saddle Threshold Instruction Manual
- June 5, 2024
- CAL-ROYAL
Table of Contents
CAL-ROYAL PST-201 Panic Saddle Threshold Instruction Manual
INSTALLATION GUIDELINE
1/2” (12.7mm) PANIC SADDLE THRESHOLD
1/2”H x 5”W x 36”L
22.2 mm x 127 mm x 914.4 mm
SCREW SIZE : #10 x 1-1/2″ PFHWS
INSTALLATION INSTRUCTIONS
-
Carefully measure to fit within the frame opening and make sure the vinyl makes contact with door face when door is closed.
-
If necessary trim and notch the threshold ends to accommodate the side jamb stops.
-
Trim seal 1/8” longer than the retainer threshold at each end.
-
Mark and drill pilot holes through the pre-drilled holes in the threshold and fasten with screws provided.
Use a weatherproof sealant at all edges and joints. -
Operate the door multiple times to ensure proper adjustment so as not to prevent the door from self-closing and latching.
MATERIAL FOR USE IN LISTED STEEL FRAMES AND CLASSIFIED HOLLOW METAL STEEL
COMPOSITE TYPE FIRE
DOORS ARE RATED UP TO AND INCLUDING 3 HOURS, WOOD COMPOSITE TYPE FIRE DOORS
ARE RATED UP TO AND INCLUDING 1-1/2 HOURS, AND WOOD CORE FIRE DOORS RE RATED
20 MINUTES WITHOUT HOSE STREAM.