DNP WCM2 AirPrint Printer User Guide
- June 5, 2024
- DNP
Table of Contents
DNP WCM2 AirPrint Printer
Setting up your WCM2 System
-
Connect the WCM2 to your DNP printer with the provided USB cable. There are 2 USB ports so you can connect two DNP printers!
-
Connect the power adapter to the WCM2. If you are using a QW410 printer, the alternate USB power cable can be connected to the USB port on the back of the printer.
-
In 60-90 seconds, the WCM2 powers on & prints a test page.
-
When ready, the WCM2 broadcasts a hotspot to C?._l.:!!lect to your mobile, PC, or MAC device.
-
In the device Wi-Fi settings, select DNPWCM-xxx.
(The last 3 digits are unique to your WCM2.) -
The default password for the hotspot is dnp12345
NOTE: Both the name and password for the hotspot can be changed in Network Settings.
-
-
Use any photo app to view your picture.
-
Press the Share icon (iOS) or the Menu icon (Android).
NOTE: If you are using cloud storage for your pictures, the WCM2 must be connected to the internet using Wi-Fi or Ethernet. -
Scroll through the list and select Print. Select the Printer and Print Size you want. Standard print sizes are available by default. Additional print sizes can be added in the printer settings menu.
-
Press Print.
Contact Us
If you need help, contact our technical support line at (+33)0149384711 For more information about your system such as other printing methods go to our website: www.dnpphoto.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>