jura GIGA X8C Professional Bean-to-Cup Machine Instruction Manual

Jura GIGA X8C
Operating & cleaning instructions 

Control elements

1. Bean container with aroma preservation
   cover

2. Bean container status indicator

3. Water tank cover

4. Water tank

5. Power switch and plug-in mains cable
   (back of the machine)

6. Coffee grounds container

7. Drip tray

8. Cup grille

9. Filler funnel for ground coffee

10. Ventilation slats (Venti Ports)

11. Storage compartment cover

12. Measuring spoon for ground coffee

13. Height- and width-adjustable dual spout

14. Splash guard

15. Height-adjustable hot-water spout

Top of the machine Front

1.       On/Off button
2.   Rotary Switch
3. O P button (programming)
4. Display
5. Multi-function buttons (button function
   depends on what is shown in the display)

Back of the machine

1. Service cover  (open by pressing with your finger)
2. Sliding catch
3. Locking device
4. Service socket (underneath cover)

Cleaning Products – GIGA (Filtered mains water)
Daily
See procedure – Daily milk system clean
Must be performed at the end of each day just before the machine is turned off
Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways Use Cafetto daily milk cleaner 1 litre bottle (Prod no. 71144) or Jura Milk System Cleaner Mini Tabs 180g (Prod no. 71150)

Weekly
See procedure – Weekly milk system clean Performed once per week
Purpose: To remove any build up of milk fats to ensure the milk frother works correctly

Use Cafetto weekly milk cleaner – 1 litre bottle (Prod no. 71145)

When prompted
Clean machine – See procedure (Coffee system clean)
Performed only when prompted (Every 220 coffees)
Purpose: Removes coffee oil from the brewing unit and coffee path to maintain the quality of the coffee

Use Jura cleaning tablets – 6 pk (Prod no. 71111) – 25 pk (Prod no. 71112)

Change the filter – Contact service on 1300 365 487
Performed when prompted by the machine, based on water volume, or during regular service
Purpose: Protects against limescale build up inside the machine maintaining water & steam paths
BWT Mains water filter
Prod no. BWT Filter (V)

GIGA X8c Professional

Daily milk system clean

Milk system cleaner
Solution Prod no. 71144 or
Mini tabs Prod no. 71150 These short instructions do not replace the ‘GIGA X8c Professional Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards.

Precondition: »Please select
product:«

Weekly milk system clean

Complete this procedure once a week after the daily milk system clean

1. Remove the splash guard. (Fig 1)
2. Remove spout cover. Press the black releasing buttons and lift. (Fig 2 – 3)
3. Pull the milk outlet down (Fig 4) and the milk hose out. (Fig 5)
4. Remove the auto frother by pulling it towards you. (Fig 6)
5. Separate the auto frother into 6 parts. (Fig 7)
6. Soak all 6 parts in 250ml of warm water & 15ml of Cafetto red weekly solution (71145) for 20 min.
7. Remove the parts from solution and rinse under cold tap water.
8. Check that water flows through the milk outlet freely. (Fig 8)
9. Re-assemble the auto frother ensuring the arrow tips line up. (Fig 9)
10. Refit the auto frother, spout cover and splash guard.

Important:
The splash guard protects the coffee spout slide ribbon behind it from milk splatters and must be fitted. Be careful not to press on the coffee spout slide ribbon as it can be damaged.

Coffee system clean
Approximate duration 20 min.

3-phase cleaning tablets
Tub of 25 (Prod no. 71112)
Pack of 6 (Prod no. 71111)

These short instructions do not replace the ‘GIGA X8c Professional Instructions for Use’. Make sure you read and observe the safety information and warnings first
in order to avoid hazards.

Precondition: »Clean machine.«
(or: »Please select product:«)![jura GIGA X8C Professional Bean-to-Cup Machine

• Figure 11](https://manuals.plus/wp-content/uploads/2022/07/jura-GIGA-X8C- Professional-Bean-to-Cup-Machine-Figure-11.jpg)

Descaling the machine
Approximate duration 50 min.
Descaling tablets
Tub of 36 (Prod no. 71122)
Pack of 9 (Prod no. 71121) These short instructions do not replace the ‘GIGA X8c Professional Instructions for Use’. Make sure you read and observe the safety information and warnings first
in order to avoid hazards.

Precondition: » Decalcify machine.«
(or »Please select product:«)![jura GIGA X8C Professional Bean-to-Cup Machine

• Figure 12](https://manuals.plus/wp-content/uploads/2022/07/jura-GIGA-X8C- Professional-Bean-to-Cup-Machine-Figure-12.jpg)

Troubleshooting:

Milk flow

• No milk Spluttering milk Not filling cups Froth milk is flat

Solution:

1. Remove the splash guard. (Fig 1)

2. Press the black releasing buttons on the sides of the spout cover and lift the cover off. (Fig 2 – 3)

3. If the flat milk is flowing normally and the problem is with the froth milk only, replace the air suction (Fig 4), refit the cover, and test the milk again. If the problem has been solved, purchase spare air suction (Part no. 70008). If the problem has not been solved go to step 4.

4. Remove the auto frother by pulling the milk outlet down (Fig 5) and pulling the milk hose connector out (Fig 6). Now you will be able to remove the auto frother by pulling it towards you (Fig 7).

5. Separate the auto frother into 6 parts (Fig 8).

6. Soak 6 parts (Fig 8) in 250ml of warm water and 15 ml of Cafetto red weekly cleaning solution (71145) for 30 min.

7. Remove the parts from the solution and rinse under tap water.

8. Clean the milk, air and steam paths using the cleaning brushes. See 2 x milk path holes in Fig 11.(Fig 9 – 13)

9. Pour tap water into the top of the milk outlet (Fig 14). If water does not pour from the two outlets as shown, soak it for
   another 30 min and retest. If you are not able to clean the outlet, order in another outlet. (Part no. 70007)

10. Re-assemble the auto frother ensuring that the arrow tips line up. (Fig 15)

11. Refit the auto frother, cover, splash guard and test. If the problem has not been solved ph 1300 365 487.

Welcome to My Coffee Shop!

Our hours of operation are Monday – Friday 9 am to 5 pm. Or you can visit us at your convenience on the web at www.mycoffeeshop.com.au. Orders and service requests can be placed by:
Phone: 1300 365 487
Fax: 02 9692 8046
E-mail: clientservices@mycoffeeshop.com.au
Online: www.mycoffeeshop.com.au/shop-online
Remittances: accountsreceiveable@mycoffeeshop.com.au
Service inquiries: servicecentre@mycoffeeshop.com.au

Next business day delivery via courier to:
Adelaide Canberra Melbourne Sydney for product orders placed by 1.30 pm Please note you will be advised when ordering if delivery charges apply to your order
Once again, welcome to My Coffee Shop, and remember we are here to help. If you have any questions please don’t hesitate to contact us.
We look forward to exceeding your expectations and making your day easier and more enjoyable.

Kind regards,
My Coffee Shop
Client Services
My Coffee Shop Pty Ltd

My Coffee Shop Pty Ltd
ACN 102 850 037
390 Johnston St
Abbotsford VIC 3067
ph: 03 9946 4160
97 / 1-5 Harwood St
Pyrmont NSW 2009
ph: 02 9034 6580

References

• Buy JURA coffee machines online - JURA United Kingdom
• Coffee Machines and Coffee Beans for Office and Home | My Coffee Shop
• Shop by Category - mycoffeeshop.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>