OzSpy Fashion Sports Portable MP3 Recording Bracelet User Guide

Fashion Sports Portable MP3 Recording Bracelet
User’s guidance

Fashion Sports Portable MP3 Recording Bracelet

Please read this user guide carefully before use This machine must be charged with 5V voltage, if 9V fast charge is used, it may cause the machine to burn out

Recording function

Recording: Do not plug in the earphone, push the switch to the ON position, the recording interface will appear on the screen, and enter the recording state; after recording, when the screen is off, you can press the “+” key (or “-” key) to check the time, and long press the “+” key (or “-” key) on the time interface to enter the recording interface. Saving ; Push the switch to the OFF position to save the recording file and shut down. (After saving the recording and turning it off, you can turn it on quickly to play the file just recorded) Note: During the recording process, do not connect to the computer, otherwise the files being recorded will be lost due to errors.

Play function

Playback plug-in headphones: Push the switch to the ON position to enter music playback;
Pause: In the playback state, short press the “+” key and “-” key at the same time to pause, and short press the “+” button (or “-” button) to exit the pause;
Track switch : During the playback state, short press the “+” key or “-” key to switch between the previous and next songs; Volume adjustment during the playback state, long press the “-” key to enter the volume adjustment interface, short press the “-” key to increase the volume, and long press the “-” button to decrease the volume;
Menu function : During the playback state, long press the “+” key to enter the menu function.
Fast forward and fast backward (requires power off and then power on again)
Fast forward and backward settings : Plug in the headphones, push the switch to the ON position, and then press and hold the “+” button until the playback starts;
Fast forward and backward : Long press the “+” button to rewind, long press the “-” button to fast forward. If you want to use it, you need to set it every time. In this state, there is no volume adjustment and no menu function.

Menu function

During the playback state, long press the “+” button to enter the menu function. Press “-” key to select, press “+” key to confirm.

playback/equalizer
Recording settings|  Recording effect settings, recording format/bit rate /voice-activated mode
Delete| delete the currently playing file
 Screensaver mode| Choose from different screensavers
Exit| Exit the menu interface

Time setting After entering [Menu Function]-[Time Setting], press the “+” key to switch the setting items, and press the “-” key to set the time. If you do not modify it, it will save and exit after 5 seconds automatically.
Sound Setting

1. set the volume
   Short press the “-” button to increase the volume, long press the “-” button to decrease the volume, and press the “+” button to confirm.

2. Variable speed playback
   Short press the “-” key to accelerate, long press the “-” key to decelerate, and press the “+” key to confirm.

3. Equalizer
   Short press the “-” key to select different playback effects <rock/funk/hip- hop/jazz/classical/electronic music/custom> to listen to music, and press the “+” key to confirm.

Recording setting

1. Recording format (the file format in which the recording is saved) MP3: general effect, compression processing, need small memory space WAV: better effect, no compression, takes up a lot of memory space

2. Bitrate Set the resolution of the recording, the higher the bit rate, the better the effect, and the more memory it takes up

3. Voice-activated mode The voice-activated mode is recorded with sound, and stops recording without sound, so as to achieve the purpose of saving memory. After turning on the voice-activated mode, unplug the headphones and restart the recording, which is the voice activated recording.

4. Recording scene
   Select the corresponding recording scene to perform noise reduction to improve the recording quality.

5. Recording segment
   Set the duration of a single recording file, for example, select 10min (minutes), that is, a file will be saved every 10 minutes of recording. Short press the “-” button to increase the duration, long press the “-” button to decrease the duration, and press the “+” button to confirm.

Delete
The file being deleted is the currently playing file. It is recommended to pause and then enter the menu and select delete to avoid accidental deletion.

Time function

Watch function
When power is off, the screen will display , at this time, short press the “+” button to select to enable the watch function, and short press the “+” button or “-” button to check the time in the shutdown state.
Note: In order to save power, the time will not be displayed all the time. if need to check the time, short press the “+” key or “-” key.
Time setting

1. Local setting: check the time setting details in the menu function
2. Setting on the PC: Connect the machine to the computer, enter the disk, you can see a folder named , copy this folder to the desktop, open the folder, double-click , as shown in the figure to confirm whether the computer time is accurate, click , as shown in the figure, indicating that the time synchronization is successful.
   If need to format the machine, Please back up this folder, to prevent loss.

Charging the machine/connecting to the computer

Insert the data cable into the headphone jack of the machine. When inserting it, insert it with a little force to the end without leaving a gap (turning the data head when inserting is more labor-saving) ‘
The charging voltage is 5V, and it is also charging while transmitting data!

1. Insert the data cable into the headset/charging/data hole of the machine, and then connect it to the computer or charger to charge. It is recommended to use a USB data cable to connect this machine to a computer for charging.
2. Please use a power adapter with a charging current of 1A or less for charging, otherwise, it may damage the unit or cause danger (this product is not equipped with a power adapter).
3. In the charging state, the power box in the upper right corner of the recorder screen will jump; in full state, the power box in the upper right corner of the recorder screen will no longer jump.
4. After connecting to the computer, the machine can be used as a U disk function to play the machine’s recording files or delete files in batches.

Function parameter

product  type| bracelet voice recorder| 4GB| Can be stored for 48 hours recording files
---|---|---|---
Recording method| Record -Power on,   save -power off| 8GB| Can be stored for 96 hours recording files
Battery| Environmentally friendly polymer lithium battery| 16GB| Can be stored for 192 hours recording files
charging time| about 1 hour| 32GB| Can be stored for 384 hours recording files
Sampling Rate| 48KHz| bit rate| 256Kbps-1536Kbps
Recording format| MP3/WAV| Play format| MP3/WMA/WAV

Precautions

1. When charging or connecting to a computer, turn the switch to the “OFF” position. When unplugging, wait for the screen to turn off before using it.
2. After recording, no matter whether the recording pen has power or not, you must turn the switch to the “OFF” position first to save the recording file, otherwise, the recording file will be lost.

Q&A

1. Suddenly can’t record
   Please back up important files and format them on the computer. If they can be used normally after formatting, please clean up the computer in time. In this case, the computer virus infects the recorder and causes the recorder to be unusable. It may take a long time. The machine will be damaged beyond repair.

2. The screen does not respond or is always on in an abnormal state
   Please back up important files first, and then restore the factory settings. After connecting to the computer, click My Computer, find the mobile drive letter, right-click the mouse, select Format, and then select Quick Format. In this way, the factory reset can be completed, and most faults can be eliminated.

3. No response after connecting to the computer through the data cable
   First check whether the plug is inserted properly. If the computer still does not respond, try to connect to a different computer. Some computers cannot be recognized due to lack of drivers. If it is still not recognized after trying, you can contact after-sales upgrade or after-sales service.

This machine comes with an intelligent reset system, please save the file being recorded before connecting to the computer. Because the recording effect and sound quality of this product are relatively clear and the parameters are relatively high, the recording file is relatively large, please extract it in time, and the company is not responsible for the loss of data.

Documents / Resources

| OzSpy Fashion Sports Portable MP3 Recording Bracelet [pdf] User Guide
Fashion Sports Portable MP3 Recording Bracelet, Portable MP3 Recording Bracelet, Recording Bracelet, Bracel
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>