Rollei 50 W Lumen Pro RGB LED Panel Instruction Manual

: June 4, 2024
: Rollei

Table of Contents

**
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**

Rollei 50 W Lumen Pro RGB LED Panel

Before the First Use
Before using the device for the first time, read the operating instructions and the safety instructions carefully.
Keep the operating instructions together with the device for later use. If other people use this device, please make these instructions available to them. If you pass the device on to third parties, these instructions belong to the device and must be supplied with it.
Intended Use
This device is designed for photo and video lighting only. It may not be used for other purposes, and especially not for domestic room lighting.
Explanation of symbols

The following symbols are used in this manual, on the LED light, the power supply unit or on the packaging.

Products marked with this symbol comply with all relevant community regulations of the European Economic Area.
Products marked with this symbol are operated with direct current.
Products marked with this symbol are operated with alternating current.
Products with this symbol have additional or reinforced insulation and comply with protection class II.
For indoor use only. Devices with this symbol may only be operated indoors (dry environment).
Products marked with this symbol have a positive polarity. They may only be connected to products that also have a positive polarity.

What‘s in the box

Rollei Lumen Pro 50 W / 100 W
AC/DC adapter
Barn doors
Bag

Overview

Battery compartment
On/off switch
Mains connection
Control knob (B) ( Menu / Intensity / Brightness)
Control knob (A) ( color / color temperature)
RGBW (color model) & CCT (color temperature)
DMX input / output

Power Supply

Use with mains adapter: Please plug the supplied mains adapter into the mains connection. Set the on/off switch to ”Input DC“ to switch on the LED light.
Use with rechargeable batteries: Insert the battery into the battery compartment and set the on/off switch to ”Battery“ to turn on the LED light.
Note:
Battery and charger optionally available.

Rollei Lumen App
Download the „Rollei Lumen“ app directly from the App or Goo-gle Play Store (IOS 9.0 or higher, Android 5.0 or higher).
The ”Rollei Lumen“ app adapted for Lumen Pro RGB lamps allows you to make better use of the various functions of LED light.
Rollei Lumen App
Connecting to your smartphone

Activate Bluetooth®* on your smartphone.
Switch on the Rollei Lumen Pro RGB.
Open the „Rollei Lumen“ app, the connection to the smart-phone will be established automatically.

CCT – Color Temperature Mode
Rollei 50 W Lumen Pro RGB LED Panel 03
Adjust color temperature and brightness:

After switching on, set the switch to „CCT“.
Turn knob (A) left or right to increase or decrease the Kelvin value.
The color temperature can be set between 3200K and 9999K in hundreds of steps.
Press the control knob (A) to increase the green portion of the selected color temperature.
The menu item „GN“ is highlighted in the display and the green component can be adjusted to the lighting situation by turning the control knob (A).
The brightness can be adjusted between 0 and 100% with the adjustment knob (B) (steps: 20%, 21%, 22%, 23%, 24%, 25%, …).

Scene Mode
Rollei 50 W Lumen Pro RGB LED Panel 07
Instead of manually setting the color temperature of the LED lights, you can also use different scene modes. These are preset lighting situations. Press the control knob (B) and select the ”Light Source“ menu by turning the control knob (B). Press the control knob (B) again to select the function. Now select a scene mode by turning the control knob (B).

12: Fluorescent soft white 3200K
13: Fluorescent Warm White 3600K
14: Fluorescent White 4300K
15: Fluorescent daylight 5000K
16: Camera flash 5500K
17: Fluorescent daylight 6700K
18: Daylight cloudy 7300K
19: Daylight Shadow 8400K
20: Daylight Snow 9500K

Note:
The connection is established using Bluetooth®* Low Energy (BLE). For this a location release of the app is necessary. The connection to the LED light is established directly in the app.
Rollei 50 W Lumen Pro RGB LED Panel 09
Save Color Features and Brightness:

You have the possibility to save up to 8 different color profiles.
Select your desired color temperature and brightness.
Then press the setting knob (B) and select the „Preset Temp“ menu by turning the setting knob (B). Press the control knob (B) again to select the function.
Now turn the control knob (A) to select the different memory locations.
To save the set color temperature and brightness, press the control knob (A) once.
To recall the saved settings, press the control knob (B), select the Preset Temp menu, and select the memory location by turn-ing the control knob (A).

HUE – RGB Mode
Rollei 50 W Lumen Pro RGB LED Panel 10

After turning on the power, set the switch to ”RGBW“.
Turn knob (A) left or right to change between 360 colors.
Press the control knob (A) to adjust the saturation of the color. The menu item ”Sat“ is highlighted in the display.
Turn the adjustment knob (A) clockwise to increase saturation (0 – 100 %) and counterclockwise to decrease saturation.
Turn the control knob (B) clockwise to increase the intensity (0 / 20 – 100 %) and counterclockwise to decrease the intensity.

Color, Saturation and Intensity
Rollei 50 W Lumen Pro RGB LED Panel 13
Save color, saturation and intensity:

You have the possibility of up to 8 different color profiles to be saved.

Select your desired color, saturation and intensity.
Then turn the control knob (B) and select the Preset Colors menu by turning the control knob (B). Press the control knob (B) again to select the Preset Colors menu.
Turn the control knob (A) to select the different memory locations.
To save the set color, saturation and intensity, press the control knob (A) once.
To recall the saved presets, press the control knob (B), select the Preset Colors menu, and select the preset location by turning the control knob (A). To exit the Preset Colors menu, press the control knob (B).

DMX Option
Connect the DMX output (7) to the RGB Pro light and turn on the unit. The control panel should automatically detect the control and switch to DMX mode. The display will show ”DMX 512 with RGB“. The channel information is displayed below the display.

Channel 1: Centre channel
Channel 2: Red
Channel 3: Green
Channel 4: Blue

The DMX512 is set to channel one by default, but four channels are supported. Set channel one to any number above zero (we recommend the 50% position). The panel functions supported in DMX mode are RGB, Hue/Saturation/Intensity and CCT, Red, Green and Blue can now be controlled individually. To change the mode, press the control knob (B) once. The menu displays the following:
DMX

1/SW 2/R 3/G
1/SW 2/l 3/S4/H
1/SW 2/BRI 3/CCT

The number in front of each letter is the channel number for the selected function. The first line is the RGB mode and allows the user to make red, green and blue settings. The second line allows you to adjust the intensity, saturation and hue of the selected color. The third line allows you to switch to CCT mode. To change the mode, turn the control knob (B) clockwise until the desired mode is highlighted. Press the control knob (B) and the light changes to the selected mode and can be controlled with the DMX controller.
Color Effects and Styles
Rollei 50 W Lumen Pro RGB LED Panel 15
You can use the Lumen Pro RGB to recall various preset styles and color effects.

Press the control knob (B) and select the menu ”Cycle Effects“ by turning the control knob (B). Press the control knob (B) again to select the function.
Now select a color effect or cycle by turning the knob (B).
- Transitions: 37-47, 83
- Stroboscope: 48-55, 84-86
- Pulsating: 56-59, 81-82, 87
- Fire Light: 102
- Party Lights: 103
- Police car: 104
- TV light: 105
- Flash: 106

To increase or decrease the speed of the effect, turn the control knob (A) until ”Speed“ is highlighted. Turn knob (B) to adjust the speed – 1 is the slowest speed and 32 is the fastest.
Rollei 50 W Lumen Pro RGB LED Panel 17

Technical Data Lumen Pro RGB 50 W

Rollei 50 W Lumen Pro RGB LED Panel 18

Technical Data Lumen Pro RGB 100 W

Rollei 50 W Lumen Pro RGB LED Panel 19

The Bluetooth® word mark and logos are registered trademarks of the Bluetooth SIG, Inc. and any use of such marks by Rollei is under license. Other trademarks and trade names are the property of their respective owners.

Safety Instruction

Electric current hazard!
Faulty electrical installations or excessive line voltage can cause electric shock.

Only connect the product if the mains voltage of the socket corresponds to the information on the type plate.
Connect the product to an easily accessible socket so that you can quickly disconnect it from the mains in the event of problems.
Only use the power cord supplied.
Do not use the product if it is visibly damaged or if the cable is defective.
f the product or the accessories are damaged, they must be replaced or repaired by the manufacturer, its customer service or a similarly qualified person in order to avoid hazards.
The housing may not be opened and repairs may only be carried out by a specialist. To do this, contact a specialist work-shop. In the event of repairs by the user, improper connection or incorrect operation, any liability and warranty claims are excluded.
Do not use the product with an external timer.
If you are not going to use the device for a long period of time, always disconnect it from the power source.
Protect the product from moisture. Do not touch it with wet /damp hands and do not immerse it in water.
This product is not waterproof! Do not use this product in the rain or in wet areas. Never touch the product during a thunderstorm.
Before disconnecting the power or battery connection, switch off the device at the main switch.
Provide adequate ventilation during operation. Never cover the device.
Only use the device with suitable, high-quality V-Mount batteries.
Do not use or store the device at high temperatures or in closed rooms with direct sunlight and do not charge the batteries du-ring this time. The product should no longer be used at ambient temperatures of more than 40° C.
Immediately remove the battery and, if necessary, the charging cable from the housing if there are unusual noises, smells or smoke.

Danger!

Never use the power cord as a handle.
Keep product and accessories away from open flames, hot sur-faces and easily inflammable materials.
Lay the power cord so that it does not pose a tripping hazard.
Do not kink the power cord or lay it over sharp edges.
Danger for children and people with limited physical, sensory or mental abilities (e.g. partially handicapped people, older people with limited physical and mental abilities) or lack of experience and know-how (e.g. older children).
This product can be used by persons with limited physical, sensory or mental capabilities or lack of experience and know-how, provided that they are supervised or have received instructions for the safe use of the product and understand the possible dangers arising from its use. Children are not allowed to play with the product. The product must not be cleaned or maintained by children. Keep children under the age of eight away from the product and its accessories.
Do not insert any objects into the product.
Do not leave the product unattended during operation and charging.
The device is not a toy. Keep the device, accessories and packaging materials away from children and animals to prevent accidents and suffocation.
Do not film drivers of cars, buses, bicycles, motorcyclists or train drivers while driving with this product. The driver can be blinded and cause an accident. This also applies to persons or groups not listed if an accident could be caused by possible glare.
Do not shine directly into the eyes of people or animals, as this can damage the retina, impair vision and even lead to blind-ness.

Note:
For lighting for photographic purposes only. Not suitable for permanent room lighting.

Disposal

Dispose of packaging: For disposal, separate packaging into different types. Cardboard and board must be disposed of as paper and foil must be recycled. Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. This symbol on the product or on the packaging indicates that this cannot be disposed of as a household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment.
Conformity
Hereby Rollei GmbH & Co. KG hereby declares that the the radio system types ”Rollei Lumen Pro RGb 50 W“ and ”Rollei Lumen Pro RGB 100 W“ complies with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following Internet address: www.rollei.com/egk/LumenProRGB
Rollei GmbH & Co. KG
In de Tarpen 42
22848 Norderstedt
Germany