SUPERATV Soft Cab Doors Instruction Manual

**

**

SUPER ATV Soft Cab Doors

**

**

**PRODUCT OVERVIEW

**Notes

• Hook and Loop Fasteners should be applied at a temperature of 70°F or above.
• Use Denatured Alcohol and thoroughly clean any area where Hook and Loop Fasteners will be installed.
• Installing and adjusting Soft Cab is easier with two people.
• When cleaning Soft Cab, use soap and water only. Do not use detergent, window cleaner, or solvents.
• Do not use a dry cloth or rag on windows.
• Do not fold Soft Cab before storing. Zip windows closed and roll Soft Cab to store.
• Do not discard packaging until the product has been successfully installed.
• Doors may be secured with Snaps only, Hook and Loop Fastener only, or a combination of Snaps and Hook and Loop Fastener.
• Any whiteness, clouding, wrinkles, or waves that develop will gradually disappear when Soft Cab is exposed to sunlight and/or heat. Use a heat gun or hair dryer to speed up this process. Do not overheat or heat in one area for an extended period of time.

Need help with your installation?

• www.superatv.com
• 8:00am – 8:00pm EST M-Th
• 8:00am – 7:00pm EST Friday
• 9:00am – 2:00pm EST Saturday
• sales@superatv.com
• 1-855-743-3427

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV® to verify that they will work together. Although SuperATV® has thousands of satisfied customers, users should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing SuperATV® products, the user agrees that should damage occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.  SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if the item was not installed properly, misused, or modified.  Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on the town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation of the law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The Buyer is responsible for fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings, and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

• Cut and secure Hook and Loop to Cage in locations shown
• Cut and secure Hook and Loop to Body in the location shown.
• Place the Door onto a machine and align.
• Loosely secure Straps
  • Secure Flap to Hook and Loop.
• Secure Flaps to Hook and Loop.
• Secure Flap to Hook and Loop.
• Repeat for the driver’s side.
• Cut and secure Hook and Loop to flaps on the lower inside portion of Doors
• Peel backing from Hook and Loop.
• Fold the flap down and firmly press along areas where Hook and Loop are installed.

STOP wait 15 – 30 minutes for the adhesive to setup

• Carefully open flap; use one hand to gently separate Hook and Loop Fastener from flap and plastic while opening.
• Apply more heat to Hook and Loop
• Cinch Straps tight.

Snaps installation

• Outline Snaps with a paint marker, lipstick, or marker.
• To mark locations, press Snaps onto the Body or Velcro.
• Install provided Snaps.
• Secure Door to Snaps.

References

• SuperATV.com
• superatv.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>