DNS INDUSTRIES WD-290B Wireless Charger Stand Instruction Manual

: July 31, 2024
: Dns Industries

Table of Contents

DNS INDUSTRIES WD-290B Wireless Charger Stand
Product Information
Product Usage Instructions
PARTS DESCRIPTION
Key Features
How to use
Declaration for EU Compliance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DNS INDUSTRIES WD-290B Wireless Charger Stand

Product Information

Specifications:

Input: 5V DC/3A, 9V DC/3A
Output1: 5W/7.5W/15W (for iPhone)
Output2: 5W (for AirPods)
Dimension: 70mm x 70mm x 78.8mm

Key Features:

Foldable stand design for iPhone and TWS charging simultaneously
Fast charging capability
Mini-size design, lightweight, and portable

Product Usage Instructions

How to Use:

Connect a PD source and the USBC port using a USB-C cable.
Place the iPhone on the Qi2 charging area and AirPods on the TWS charging area.

Compatible with:

The wireless charger is compatible with various iPhone models including iPhone 12, 13, 14, and 15 series.

Note:

Operate the wireless charger in an environment with a temperature between -10°C and 40°C to prevent damage. It can operate at altitudes below 2000m.

FAQ

Q: What should I do if my device is not charging?
- A: Ensure that the PD source is connected correctly and that the devices are placed on the designated charging areas securely.
Q: Can I use this charger with non-compatible devices?
- A: It is recommended to use only with compatible devices to ensure optimal performance and safety.
Q: How do I clean the wireless charger?
- A: Use a soft, dry cloth to gently wipe thecharging surface to remove any dust or debris.

PARTS DESCRIPTION

Qi2 MPP charging position for iPhone12/13/14/15 serials;
TWS charging area for AirPods/TWS;
USB C input port.

Key Features

Foldable stand design
iPhone and TWS charging simultaneously
Fast charge
Mini-size design, lighter and more portable

How to use

Use a USB C cable to connect a PD source and the USBC port;
Put the iPhone on the Qi2 charging area, put the AirPods on the TWS charging area;

Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD.
Address: 23/F Building A, Shenzhen International Innovation Center, No.1006 NShennan Road, Futian, Shenzhen, China

Specification:

Input: 5V DC/3A, 9V DC/3A
Output1: 5W/7.5W/15W(for iPhone)
Output2: 5W(for AirPods)
Dimension: 70mm70mm78.8mm.

Compatible with

iPhone 15 Pro Max
iPhone 15 Pro
iPhone 15 Plus
iPhone 15
iPhone 14 Pro Max
iPhone 14 Pro
iPhone 14 Plus
iPhone 14
iPhone SE (3rd generation)
iPhone 13 Pro Max
iPhone 13 Pro
iPhone 13
iPhone 13 mini
iPhone 12 Pro Max
iPhone 12 Pro
iPhone 12
iPhone 12 mini

Note:

Use the Wireless charger in an environment with the temperatures between -10℃ and 40℃, otherwise, it may damage your wireless charger. It can be operating under 2000m.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body

FCC Warning & Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Declaration for EU Compliance

Hereby, SHENZHEN DNS INDUSTRIES CO., LTD. declares that the Radio equipment is in compliance with Directive 2014/53/EU requirements, the full text of the declaration of conformity are available at the following internet address: https://www.dnschina.com

Correct Disposal of this product This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Working Frequency