makita ADP12 Communication Connector Instruction Manual

ADP12
Communication Connector
INSTRUCTION MANUAL

ADP12 Communication Connector

https://support.makita.biz/manual/adp/adp12/manual_index.html

https://apps.apple.com/app/id1644042388?mt=8
https://play.google.com/store/apps/details?id=jp.co.makita.mj.makitamanage_en

https://support.makita.biz/app/adp/adp12/app_index.html

(Original instructions)

SPECIFICATIONS

Dimensions
(LxWx H)
(Without the battery and the tool)| 98 mm x 85 mm x 55 mm
Net weight
(Without the battery and the tool)| 0.17 kg
Bluetooth| Bluetooth® version| 5.1 (Bluetooth low energy)
Transmission range| Approximately 10 m
Frequency band| 2,402 MHz – 2,480 MHz
Maximum radio-frequency power| 0.11 dBm (EIRP)

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Some of the battery cartridges listed above may not be available depending on your region of residence.

Applicable USB cable

Use a USB cable that matches the USB Type-C terminal.
We recommend a USB cable with a shield, USB-IF approval, and a length of up to about 1.8 m.

Applicable cord connected power source

Whether the cord connected power source is applicable or not depends on what the tool to be used with. Refer to the specification of the tool.

Notification about non-compatible tools

Some tools are not compatible with this connector.
Please refer to the web manual in the figure for specific model numbers.

App web manual for ADP12
► Fig.1

Symbols

The followings show the symbols which may be used for the equipment. Be sure that you understand their meaning before use.

| Read the instruction manual.
---|---
| Indoor use only.
| Only for EU countries
Due to the presence of hazardous components in the equipment, waste electrical and electronic equipment, accumulators and batteries may have a negative impact on the environment and human health.
| Do not dispose of electrical and electronic appliances or batteries with household waste!
In accordance with the European Directive on waste electrical and electronic equipment and on accumulators and batteries and waste accumulators and batteries, as well as their adaptation to national law, waste electrical equipment, batteries and accumulators should be stored separately and delivered to a separate collection point for municipal waste, operating in accordance with the regulations on  environmental protection.
This is indicated by the symbol of the crossed out wheeled bin placed on the equipment.

Declarations of Conformity

For European countries only The Declarations of conformity are included in Annex A to this instruction manual.

ICES (IC) standard

For Canada only
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

SAFETY WARNINGS

Before using this connector, read all instructions and cautionary markings on this connector, battery cartridge, and product using this connector. Follow all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Work area safety

1. Do not expose this connector to rain, snow, or wet condition. Otherwise water may get into the connector and cause electric shock or short circuit.
2. Do not operate this connector in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Risk of explosion or fire.

Electrical safety

1. Use a USB cable that matches the USB Type-C terminal. Do not modify the USB cable. Otherwise malfunction may occur.
2. Do not short the terminal. Keep the terminal away from other metal objects, like needles or wires, which can make a connection from one terminal to another. Shorting the  terminals together may cause burns or a fire.
3. Use this connector only with specifically designated battery packs. Do not use the modified battery. Use of any other battery packs may create a risk of injury and fire.

Service

1. Have this connector serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of this connector is maintained.
   Do not disassemble or tamper with this connector. It may result in a fire, excessive heat, or explosion.
   If you notice any abnormality in this connector, send it Makita Authorized or Factory Service Centers for inspection and repair.
   If a person without repair knowledge and skills repairs this product, not only it will not perform sufficiently, but there is also the risk of an accident or injury.

Additional safety warnings

1. Inspect for damaged parts. If any abnormality or malfunction occurs, stop using this connector immediately. If you continue to use it, smoke/ fire, electric shock, and injury may occur. <Examples of abnormalities/failures>
   • The cable or the terminal are abnormally hot.
   • There is deep scratches or deformation.
   • When touching the USB cable, conductors may or may not be energized.
   • It smells burnt.
   • There is an electrical sensation.
   If you feel any trouble, immediately disconnect power source from the connector and contact Makita Authorized or Factory Service Centers for inspection and repair.

2. If you notice any abnormalities such as heat generation of the battery cartridge during use, immediately remove and stop using the battery cartridge. Continued use may cause smoke, fire, or explosion.

3. Do not store and use this connector in locations where the temperature may reach or exceed 50 °C (122 °F). Store in a dry place and out of the reach of children. There is a risk of an accident.

4. Do not touch the terminals with wet hands. Risk of electric shock.

5. Do not drop this connector. Risk of malfunction.

SAVE THESE INSTRUCTIONS ­ This manual contains important safety and operating instructions for this connector. When lending this connector, always attach this instruction manual.

Safety warnings for radio waves

1. Do not use this product near electronic devices with high-precision control and faint signals. (Examples of electronic devices that require caution: A hearing aid, a pacemaker, other medical equipment, a fire alarm, an automatic door, and other automatic control equipment).
2. The radio wave of this product is not guaranteed in all environments. In the following cases, the radio wave may not reach or the radio wave may be interrupted.
   • When using this product in buildings where concrete, rebar, or metal is used.
   • When using this product near obstacles.
   • When this product is interfered with wireless communication devices that use the same frequency.
   • When using this product near the equipment such as microwave ovens that generates magnetic field, static electricity, or radio interference.

RESPECTIVE TRADEMARKS and REGISTERED TRADEMARKS

• The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Makita is under license. Other trademarks and trade names are those of their respective owners.
• Android and Google Play are trademarks or registered trademarks of Google LLC.
• iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
• The iPhone trademark is used under license from Aiphone Co., Ltd.
• App Store is a service mark of Apple Inc.
• All other trademarks in this document are the property of their respective owners. Note that TM and ® marks are omitted in some of the main text.

PARTS DESCRIPTION

► Fig.2

1. Button

2. USB port
   For communication with a PC. Cannot be used for charging USB devices.

3. Status
   Lamp| Status
   ---|---
   Off| Power source (battery cartridge/USB) is not connected to this connector.
   Lighted in green| Power source is connected to this connector.
   Blinking in red| Data reading/loading error

4. Mode
   Refer to the app web manual for details of each mode.Lamp| Mode
   ---|---
   Off| Communication (Comm) Mode
   Lighted in red| Stand-alone Mode (Battery)
   Lighted in green| Stand-alone Mode (Tool)

5. USB connection
   Lamp| USB connection
   ---|---
   Off| PC app is not connected to this connector.
   Lighted in green| PC app is connected to this connector.
   Blinking in green (fast)| Communicating with PC app

6. Bluetooth connection

WHAT YOU CAN DO WITH ADP12

For details on how to use the app, refer to the app web manual for ADP12. (Refer to Fig.1.)

Features

• Anti-theft setting (PIN code)
  You can set the PIN code for each tool and battery cartridge. Only the combination of the tool and battery cartridge with matching PINs can be operated.

• Battery timer setting
  An expiration time/date can be set to battery cartridges according to a construction schedule so that the cartridges are not usable after the construction is finished.

• Service assistance
  

  • Tool checker
    Tool status and operation history can be displayed.

  • Battery checker
    Battery status and operation history can be displayed.

  • Notepad registration
    You can register characters in the tool and battery cartridge (the number of characters that can be registered depends on the model). It is used for tool management and maintenance history.

NOTE: Some features are not available depending on the tool.
NOTE: In the tool checker, the number of operation history may be displayed even with the brand new tool due to the inspections in factory, etc.

PRIOR TO USE

Installing the app

• The app is free, but a separate communication fee may be charged when downloading.
• The app is exclusively for Makita products.
• Please use the app after agreeing to the latest version of the application terms of use. At the first startup or installing the app, the terms of use screen will be displayed.
• The application screen may be changed or unavailable without notice due to future updates.

For smartphones/tablets
Preparation in advance
A smartphone/tablet (iOS or Android) is necessary to use the app.

• iOS (iPhone): iOS 13 or later is required.
• Android: Android Version 9.0 or later is required.
  With some exceptions, Android devices need to allow location information to be used for Bluetooth connections.

Installing the app

1. Search for “Makita Tool Management” on App Store or Google Play. You can also access from the QR code in the following figure.
   Smartphone app download site
   ► Fig.3

2. Install the app. A “Makita Tool Management” icon will be created on the home screen.

For PCs
System requirements
The PC must satisfy the following requirements to use the app.

• OS: Windows 10, or Windows 11

Installing the app

1. Access the URL shown in the following figure.
   PC app download site
   ► Fig.4

2. Download “MakitaToolManagementSetupEN v1020.exe” and install the app.

Connecting the PC
Before starting the app, connect this connector to the PC.
► Fig.5
NOTICE: Do not disconnect the USB cable while the USB connection lamp of this connector is flashing.

Installing the battery cartridge/tool
Optional accessory
Before starting up the app, install the battery cartridge and the tool to this connector.

Installing or removing battery cartridge
CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of this connector, causing injury to you or someone around you.
CAUTION: Be careful not to pinch your finger between the battery cartridge and the terminals.
NOTICE: Charge the battery cartridge before use. The battery cartridge that has no remaining capacity cannot be used.
NOTICE: When removing the battery cartridge, make sure that the installed tool is completely stopped and there is no communication with the app. Otherwise malfunction may occur.
To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator as shown in the figure, it is not locked completely. To remove the battery cartridge, slide it from this connector while sliding the button on the front of the cartridge.
► Fig.6: 1. Red indicator 2. Button 3. Battery cartridge

Installing or removing tool
CAUTION: Do not put your finger on the switch of the tool. Otherwise unintentional starting may cause and injury result.
NOTICE: When installing or removing the tool, make sure that the installed tool is completely stopped. Otherwise malfunction may occur.
NOTICE: When removing the tool, make sure that there is no communication with the app. Otherwise malfunction may occur.
NOTE: The tool does not drive with this connector attached.
To install the tool, align the tongue on this connector with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. To remove the tool, slide it from this connector while sliding the button on the front of this connector.
► Fig.7

TROUBLESHOOTING

Re-install the battery cartridge as described in this manual.
The status lamp blinks in red.| The tool is installed improperly.| Remove the tool once. Re-install the tool as described in this manual.
Battery cartridge is installed improperly.| Remove the battery cartridge once. Re-install the battery cartridge as described in this manual.
The connector cannot establish the conned lion with the smartphone/ tablet.| The signal is weak.| Put the smartphone/ tablet closer to the connector.
Bluetooth connection of the smartphone/tab- let is disabled.| Activate the Bluetooth connection of the smartphone/tablet.
The USB connection with PC does not work.| The USB cable is not plugged in properly.| Make sure that the USB cable is plugged into the USB port firmly.
The cable is broken.| Use another USB cable.
The USB cable is out of specification.| Use the USB cable which is specified in this manual. Refer to the section for specifications.

If the trouble cannot be solved even after taking the above measures, the connector may be defective. Please contact Makita Authorized Service Centers.

MAINTENANCE

CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
NOTICE: Do not wash the connector with water. Risk of malfunction.
NOTICE: From time to time wipe off the outside of this connector using a cloth dampened in soapy water.
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.

Makita Europe N.V.
Jan-Baptist Vinkstraat 2,
3070 Kortenberg, Belgium

Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
www.makita.com
885A07A912
20221115

References

• MAKITA Industrial Power Tools - The Leader In Cordless with 18V LXT Lithium-Ion
• support.makita.biz/app/
• support.makita.biz/manual/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>