Blukar K9759 Car Phone Holder User Guide
- June 14, 2024
- Blukar
Table of Contents
Blukar K9759 Car Phone Holder
Welcome
Thank you for purchasing this Blukar product. In order to ensure optimum
performance and safety, please read this user manual carefully and keep it for
future reference. If you need any additional assistance, please contact our
customer support team or send us an email to
support@blukartech.com
Product Specifications
- Materials : ABS+PC Compatible
- Phone Size: 4.0-6.7 inches
- Application: Windscreen / Dashboard / Car Vents
Structure Diagram
Long Arm Base Installation Steps
- Loosen the fixed nut completely, pass the ball joint through the fixed nut, and push it to the groove behind the car holder.
- Tighten the fixed nut.
- Clean the area where the car holder is to be installed (dashboard/ windshield) with a damp cloth and wait for it to dry
- Open the suction cup lock, peel off the protective film from the suction cup, and attach the suction cup to the dashboard/windshield. Press the suction cup firmly to make it secure and then lock the suction cup lock. ( Tip : The suction cup will stick better if left to stand for 24 hours after locking.)
- Press down on the suction cup and adjust the angle to fit your sight.
Air Vent Base Installation Steps ****
-
Loosen the fixed nut completely, pass the ball joint through the fixed nut, and push it to the groove behind the car holder.
-
Tighten the fixed nut.
-
Press the button to adjust the opening of the clip and find the right position (car vent blade) to insert the car holder, for a better experience, please make sure to insert enough depth
-
Release the button and the clip will automatically clamp and fix on the car vent blade.
-
Adjust the angle of the car holder to fit your sight
Instructions for Use -
Press both sides of the clamp arms and they will automatically pop open
-
Place the phone and press the clamp arms on both sides to tighten them and hold the phone firmly.
-
After use, press the clamp arms on both sides again to open the arms and remove the phone.
Attention
- Before you start driving and navigating, please install the car holder in a suitable position,
- Do not adjust the car holder while driving Do not mount the car holder in a place where it will interfere with the airbag and driving operation
- Keep the car holder away from children
www.blukartech.com
EMAIL: support@blukartech.com
WEBSITE: www.blukartech.com
Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. All rights reserved
Product Name: Car Phone Holder Model: K9759
Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd
Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada Road,
Bantian Street, Longgang District, Shenzhen, Guangdong, China