Caple C901 Induction Hob Owner’s Manual

Caple C901 Induction Hob Owner’s

Dear customers,
Congratulations on your purchase of a Caple induction hob.
In order to make the best use of your appliance, please carefully read the following use and care manual and keep it for reference.

SAFETY

Precautions before using

• Unpack the hob and all associated components, taking care not to lose or mishandle any parts.
• The appliance must be installed by a suitably qualified professional and connected to the electricity supply by a qualified electrician who will comply with the local regulations. The manufacturer cannot be held responsible for damage caused by wrong installation or connection.
• The appliance must be installed in a purpose-designed kitchen unit and worktop cut out as specified below.
• This appliance is intended to be used in household and similar applications such as:
• Staff kitchen areas in shops, offices and other working environments.
• Farm Houses.
• By clients in hotels, motels and other residential type environments.
• Bed and breakfast type environments.
• Remove all labels and other packaging materials from the ceramic surface prior to use.
• Do not modify the appliance in any way as this will invalidate the guarantee and is potentially dangerous.
• The hob must not be used as a freestanding appliance or as a worktop.
• This appliance must be connected to the electricity supply according to the local regulations. It must be suitably earthed.
• Do not use any extension cable to connect the hob.
• This appliance must not be installed above a dishwasher or tumble dryer as steam may damage the electronic components.
• This appliance must not be controlled by external tools like separate timer or separate remote control system.
• Using the appliance
• Always switch cooking zones off after use.
• Take particular care when cooking with oils or fats that may ignite.
• Cooking pans and ustensils and the hob itself become hot during use. Caution, risk of injury to people and pets both during and after use.
• Ensure no cable from any other appliance can come into contact with the hob top or pans during use.
• Magnetic objects (such as credit cards, portable electronic devices; etc.) must not be placed near the appliance during use.
• Metal objects such as knives, forks, lides etc. must not be placed on the hob as they may become hot.
• Don’t place any other metallic object than suitable pans on the hob. In case of untimely activation or residual heat, metallic object may become hot, melt or even burn.
• Never cover the hob with any cloth or other cover. This may become hot and create a fire hazard.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Precautions not to damage the appliance
• Use of damaged pans or those with raw cast iron bottoms may damage the hob ceramic glass.
• Abrasive materials such as scouring cleaners and grits may damage the ceramic glass.
• Avoid dropping objects onto the ceramic glass.
• Take care not to strike the edges of the hob with saucepans.
• Ensure that ventilation remains free from obstructions and complies with instructions specified by the manufacturer.
• Do not place empty saucepans on the hob.
• Sugar, synthetic materials or aluminium foil must not come into contact with the heating zones. These may cause permanent damage to the ceramic. If these should accidentally fall onto the hob, turn it off immediately and carefully remove them. Take care not to burn yourself.
• WARNING : Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• CAUTION : The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
• WARNING : Danger of fire: do not store items on the cooking surface.
• Never place any hot items on the control panel.
• If a drawer is located below the hob, ensure that a minimum air gap of at least 4 cm is left between the drawer contents and the base of the hob. This is essential to guarantee correct ventilation. A horizontal divider made of material capable of withstanding 65°C above ambient temperature can be used to ensure this air gap.
• Never place inflammable items or materials (like sprays) in a drawer or cupboard below the hob. Cutlery drawers must be resistant to heat.

Precautions in case of appliance failure

• If a fault is noticed, switch off the appliance and turn off the electricity supply.
• There are no user-serviceable parts inside the appliance. Don’t open the appliance by yourself. All repairs must be performed by a suitably qualified service engineer or similar.
• WARNING : If the ceramic glass is broken or cracked, don’t use the appliance and turn off the electricity supply to avoid the possibility of electric shock. Contact after-sales service.
• See the troubleshooting section in this manual.

Other protections

• Ensure that each pan is well centred on its cooking zone. The pan base must cover as much of the cooking zone as possible.
• For those with heart pacemakers or active implants, the magnetic field could influence its operating. You should obtain information from the retailer or your attending physician.
• Do not use aluminium or plastic containers: they could melt onto hot cooking zones.
• NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

THE USE OF INCORRECT COOKWARE OR ANY INDUCTION ADAPTOR PLATE DESIGNED FOR NON-MAGNETIC COOKWARE WILL INVALIDATE THE GUARANTEE. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO THE HOB AND/OR ITS ENVIRONMENT AS A RESULT OF SUCH USE.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is marked according to the European directive on Waste Electrical and Electronic Equipment
(WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please contact your local council, your household waste disposal service or the retailer where you purchased the product.

CE DECLARATIONS OF CONFORMITY

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).

WARRANTY

Your new appliance is covered by warranty. The warranty card is enclosed – if it is missing, you must provide the following information to your retailer in order to receive a replacement: date of purchase, model and serial number. Registration can also be completed online by visiting www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service together with proof of purchase.
If you fail to show your warranty card you will incur all repair charges. Spare parts are only available from Caple Service and spare parts authorised centres.

UKCA DECLARATIONS OF CONFORMITY

This appliance has been manufactured to the strictest standards and complies with all applicable legislation.

TECHNICAL FICHE

This appliance conforms to all current and applicable regulations. To view the Technical Fiche that supports the energy labelling data, please visit the product page on our website
www.caple.co.uk

DESCRIPTION OF THE APPLIANCE

Technical characteristics

Type C901I
Total power 7400 W
Energy consumption for the hob EChob 174.9 Wh/kg
Front left heating zone Ø 190 mm
Minimum detection Ø 90 mm
Nominal level 1100 W
Booster level 1400 W
Standardised cookware category B
Energy consumption ECcw 177.3 Wh/kg
Rear left heating zone Ø 190 mm
Minimum detection Ø 90 mm
Nominal level 1400 W
Power level 2000 W
Standardised cookware category B
Energy consumption ECcw 177.3 Wh/kg
Middle zone Ø 280 mm
Minimum detection Ø 110 mm
Nominal level 2300 W
Power level 3000 W
Standardised cookware category D
Energy consumption ECcw 171.6 Wh/kg
Rear right heating zone Ø 220 mm
Minimum detection Ø 100 mm
Nominal level 2300 W
Power level 3000 W
Standardised cookware category C
Energy consumption ECcw 171.1 Wh/kg
Front right heating zone Ø 175 mm
Minimum detection Ø 90 mm
Nominal level 1100 W
Power level 1400 W
Standardised cookware category B
Energy consumption ECcw** 1 177.3 Wh/kg

• The given power may change according to the dimensions and material of the pan. **Calculated according to the method of measuring performance (EN 60350-2).

Control panel

USE OF THE APPLIANCE

Display

Display Designation Description
0                                                          Zero The heating zone is activated.
1…9                                                Booster level Selection of the cooking level.
U                                                    No pan detection No pan or inadequate pan.
A                                                    Heat accelerator Automatic cooking.
E                                                    Error message Electronic failure.
H                                                    Residual heat The heating zone is hot.
P                                                     Booster The booster is activated.
L                                                     Locking Control panel is locked.
U                                                    Keep warm Maintain automatically of 70°C.

II                                                   Pause The hob is in pause.

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation will run at high speed
when the hob is intensively used. The cooling fan reduces speed and stops automatically when
the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before Using Your New Induction Hob

• Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent, as
  this risks causing blue-tinted colour on the glass surface.
  How Induction Works
  An induction coil is located under each heating zone. When it is engaged, it produces a variable electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the pan. As a result, the pan will heat up.
  Of course the pan has to be adapted:

• All ferromagnetic pans are recomended (please verify it thanks a little magnet): cast iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…

• Are excluded: copper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,…

• The induction heating zone is able to automatically detect the size of a pan. If the base diameter of the pan is too small and therefore fails to adapt to the induction hob, the display will show [ U ].
  Touch Control
  Your induction hob is equipped with electronic controls with touch control keys. When your finger presses the key, the corresponding command is activated. This activation is validated by a control light, a letter or a number in the display and/or a “beep” sound.
  For general use, ensure only one button is pressed at any time.
  Power selection zone “SLIDER” and timer setting zone
  To select the power with the slider, slide your finger on the “SLIDER” zone. You can also select the power by placing your finger directly on the chosen level.

Pan detection

The pan a feature ensures safety. The induction doesn’t work:

• If there is no pan on the heating zone or if the pan is not adapted to the induction. In this case, it is impossible to increase the power and the display shows [ U ]. This symbol disappears when a suitable pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking continues with the power level set before.

After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After a heating zone or the entire hob is switched off, the heating zones are still hot and indicate [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
While the residual heat indicator light is on, don’t touch the heating zones and don’t put any heat sensitive object on them. There are risks of burn and fire.
Starting-up

• Start up / switch off the hob:

Action                                                              Control panel                                                    Display
To start                                                               Press key [θ ]                                                      [ 0 ] To stop Press key [ θ ]                                                 nothing or [ H ]

• Start up / switch off a heating zone:

Action Control panel Display
To set Slide on the “SLIDER“                                 [ 1 ] to [ P ] (adjust the power)                                                       to the right or to the left
To stop Slide to [ 0 ]on “SLIDER“                      [ 0 ] or[H]

If no action is made within 20 seconds, the electronics returns in waiting position.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra-high power. The booster is used for example, to rapidly heat up big quantities of water.

• Start-up / Stop the booster:

Action Control panel Display
Start up the Power                                                  Slide to the end of the “SLIDER”                              [ P ] or press directly on the end of
Stop the Power                                                          Slide on the “SLIDER“                                    [ 9 ] to [ 0 ]

Power management:
If the selected heating levels for both zones exceed the maximum available amount of power, the
power management function will automatically reduce the power from one of these zones. The
display of this zone will blink first; the level is then automatically reduced to the highest suitable
position.
Heating zone selected                                 The other heating zone: (example: power level 9)
[ P ] is displayed                                                  [ 9 ] goes to [ 8 ] and blinks

Timer
The timer can be used with all heating zones simultaneously and with different time settings (from
0 to 1H59 minutes) for each heating zone.

• Setting and modification of the cooking time:

Action Control panel                                                       Display
Select a zone Press a zone                                                               [ 0 ] Select the power level                                                Slide on the “SLIDER“                                     [ 1 ] to [ P ] Select theTimer                                                          Press key [ ] Timer display on
Decrease the time                                                      Press key [ – ] from the timer [ 60 ] to 59, 58…
Increase the time                                                       Press key [ + ] from the timer Time increase
After a few seconds, the display stops blinking.
The time is confirmed and the timer starts.

• To stop the cooking time:
  Action                                                          Control panel Display
  Select the Timer                                            Press key [ ] Timer display on
  Stop the time                                                Press key [ – ] from the timer                           [ 000 ] If several timers are activated, repeat the process

• Egg timer function:
  Egg timer is an independent function. It stops as soon as a heating zone starts up.
  If the egg timer is on and the hob is switched off, the timer continues until time runs out

Action Control panel                                             Display
Activate the hob                                                       Press display                                             [ 0 ] Select the Timer Press [ 000 ]                                             [ 000 ] Decrease the time                                                     Press key [ – ] from the timer                   [ 60 ] to 59, 58…
Increase the time                                                       Press key [ + ] from the timer Time increase
After a few seconds, the display stops blinking.
The time is confirmed and the timer starts.

• Automatic stop at the end of the cooking time:
  As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound
  rings.
  To stop the sound and the blinking, press the key [ – ] and [ + ].

• Automatic cooking
  All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
  full power for a specific amount of time (see below table), and then automatically reduces its
  power on the pre-selected level.

Cooking Level                                       Heat-up Automatic time [sec] 1 48
2                                                                    144
3                                                                     230
4                                                                     312
5                                                                     408
6                                                                     120
7                                                                     168
8                                                                    216
9                                                             not available
P                                                            not available

• Start-up:
  Action                                                 Control panel Display
  Power level selection                            Slide on the “SLIDER“ to [ 7 ]                   [ 7 ] is blinking with [ A ] (for example « 7 ») and stay 3s

• Switching off the automatic cooking:
  Action                                                 Control panel Display
  Power level selection                          Slide on the “SLIDER“ [ 0 ] to [ 9 ]

Pause function
This function brakes all the hob’s cooking activity temporarily and allows you to restart with the
same settings.

• Start up/stop the pause function:
  Action                                                               Control panel                                                  Display
  Engage pause                                                     Press [ II ] 2s                                  [ II ] and control light on
  Stop the pause                                                   Press [ II ] 2s                                            previous settings
  Recall function

After switching off the hob ( ), it is possible to recall the last settings

• Cooking stages of all cooking zones (Booster)
• Minutes and seconds of programmed cooking zone-related timers
• Keep warm function
• Automatic cooking
• The recall procedure is following:
• Press the key [ ]
• Then press [ II ] before the light stops blinking

The previous settings are again active.

Clean-Lock function
To avoid modifying the settings of the cooking zones, in particular during cleaning, the control
panel can be locked (with exception to the On/Off key [ ]). A timer of 20 seconds begins, during this time you can clean your control panel. Your hob resumes cooking after this time.

Action Control panel                                                    Display

70°C to engage                                                      Press on key [ ]                                                         [ U ] To stop Slide on the “SLIDER“                                          [ 0 ] to [ 9] or press key [ ] [ 0 ] The maximum duration of keep warm is 2 hours.
Control panel locking

To avoid modifying the cooking zone settings, the control panel can be locked (with exception to
the On/Off key [ ]).
Action                                                           Control panel Display
Activate the hob                                              Press key [ ] [ 0 ] Locking the hob                                             Hold for 3s the key of an area then                               [ L ] Unlock the hob press the “Slider” which scrolls and
swipe from the left to the right
Unlock the hob                                         Hold for 3s the key of an area then                       [ 0 ] or [ H ] press the “Slider” which scrolls and
swipe from right to the left
“Chef” function
This function changes the hob in 3 big zones.
Start up/stop the pause function:
Action                                                           Control panel Display
Engage the chef function                                  Press [ ] [ 5 ], [ 5 ], [ 9 ], [ 7 ], [ 7 ] Stop the chef function Press [ ]                                                                  [ 0 ]

COOKING ADVICE

Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
aluminium with ferromagnetic bottom.
Non-adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
copper, brass, glass, ceramic, porcelain.
Look for the induction symbol on the packaging or on the bottom of the pan.
To check if pans are compatible:

• Put some water in a pan placed on an induction heating zone set at level [ 9 ]. If [ U ] does not appear and the water is heating, the pan is suitable.
•  Move a magnet towards the base of the pan. If it is attracted and sticks to the pan, the pan is suitable.

Certain pans can make noise when they are placed on an induction cooking zone. This noise is normal and does not affect the cooking operation, nor does it mean a failure in the appliance.

Do not use cookware with jagged edges or a curved base.
To avoid scratching the glass, always lift pans off the hob – do not slide.

Pan dimension
The cooking zones are, up to a limit, automatically adapted to the diameter of the pan. However, the bottom of this pan must have a minimum of diameter according to the corresponding cooking zone (see table on page 9 for the minimum pan diameter for each cooking zone).
To obtain the best efficiency of your hob, please place the pan in the centre of the cooking zone.
Examples of cooking power settings
(the values below are indicative)

1 to 2| Melting Reheating| Sauces, butter, chocolate, gelatine Dishes prepared beforehand
---|---|---
2 to 3| Simmering Defrosting| Rice, pudding, sugar syrup

Dried vegetables, fish, frozen products

3 to 4| Steam| Vegetables, fish, meat
4 to 5| Water| Steamed potatoes, soups, pasta, fresh vegetables
6 to 7| Medium cooking Simmering| Meat, lever, eggs, sausages Goulash, roulade, tripe
7 to 8| Cooking| Potatoes, fritters, wafers
9| Frying, roosting Boiling water| Steaks, omelettes, fried dishes Water
P| Frying, roosting Boiling water| scallops, steaks

Boiling significant quantities of water

MAINTENANCE AND CLEANING

Switch-off the appliance before cleaning.

Do not clean the hob if the glass is too hot due to risk of burns.

• Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse with cold water and dry the surface
• Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be absolutely
• Do not use any steam-cleaner or pressure
• Do not use any object that may scratch the ceramic
• Ensure that the pan is dry and clean. Ensure that there are no grains of dirt on your ceramic hob or on the pan. Sliding rough saucepans will scratch the

Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the surface being damaged

TROUBLESHOOTING

The hob or the cooking zone doesn’t start-up:

• The hob is incorrectly connected to the electrical
• The protection fuse cut-off.
• The locking function is activated.
• The touch control keys are covered by grease or
• An object is put on a

The control panel displays [ U ]:

• There is no pan on the cooking
• The pan is not compatible with
• The bottom diameter of the pan is too

The control panel displays [ E ]:

• The electronic system is
• Disconnect and replug the
• Call after

The control panel displays [ L ] :

• Refer to the chapter control panel locking

One or all cooking zone cut-off:

• The safety system
• You forgot to cut-off the cooking zone for a long time.
• One or more touch control keys are
• The pan is empty and its bottom
• The hob has an automatic reduction of the Booster level and breaking Automatic overheating.

Continuous ventilation after cutting off the hob:

• This is not a failure, the fan continuous to protect the electronic
• The fan cooling stops automatically once the temperature has reached a safe

The automatic cooking system doesn’t start-up:

• The cooking zone is still hot [ H ].
• The highest Booster level is set [ 9 ].

The control panel displays [ U ]:

• Refer to the chapter “Keep warm“.

The control panel displays [ II ]:

• Refer to the chapter “Pause“.

When the symbol [ E 4 ] appears :

• The table must be reconfigured. Please implement the following steps:

1. Important: before you start, make sure there is no more pot on the hob
2. Disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off

Reconnect the table to the grid

1. Procedure:

• take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm
• start the procedure within 2 minutes after reconnecting the hob to the grid
• don’t use the [ ] touch

1. First step : cancel the existing configuration

• Press the key [ ] and hold down
• The symbol [ – ] will appear on each display
• With your other hand, press successively and quickly (less than 4s) on each [ – ] display.

Begin from the front right side and turn contrary clockwise, as described on the picture (from “a” to “e”).

A double “beep” means an error occured. If so, start again from item 1).

• Remove your fingers from the touch control, then push again on key [ ] for a few seconds, until blinking [ E ] symbols
• Wait until [ E ] symbols stop
• After a few seconds, [ E ] are automatically transformed in [ C ]. The existing setup has been
• Second step: new setup
• Take a ferromagnetical pot with a minimum diameter of 16 cm
• Select a cooking zone by pushing on the corresponding [ C ] display
• Place the pot on the area to be set
• Wait until the [ C ] display becomes a [ – ]. The selected cooking zone is now configured.
• Follow the same procedure for each cooking zone with a [ C ]
• All the cooking zones are configured once all the displays are turned off. Please use the same pot for the whole

Never put several pots together on the zones during the setup-process.

• If [ E 4 ] displaying remains, please call the customer

The control panel displays [      ] or [ Er03 ] :

• An object or liquid covers the control keys. The symbol disappears as soon as the key is released or

The control panel displays [ E2 ] or [ E H ] :

• The hob is overheated, let it cool and then turn it on again.

The control panel displays [ E3 ] :

• The pan is not adapted, change the

The control panel displays [ E6 ] :

• Defective network. Control the frequency and voltage of the electrical

The control panel displays [ E8 ] :

• The air inlet of the ventilator is obstructed, release

The control panel displays [ E C ] :

• Configuration error. Set the table again, referring to the chapter “The [E 4] “

If one of the symbols above persists, contact Caple Service. T – 0117

938 7420

E – service@caple.co.uk.

INSTALLATION INSTRUCTIONS

The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforced in their country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet. Installation has to be done carefully, in conformity with the following drawing.

                        Stick the gasket (2) two millimeters from the external edge of                             the glass, after removing the protection sheet (3).

Fitting – installing:

•   The cut-out sizes and flush mounting:

Glass            Cut size                Rear                  Side Radius             Cut size                  Deep

A1     B1         C     D               E                    F H              A2     B2                 G
520   880     490    810             50               40                   8 526   886             5

        Ensure that there is a distance of 50mm between the hob and the

wall or sides.

• The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear and tall units or a wall at one side. On the other side, however, no unit or divider must stand higher than the hob.
• The piece of furniture or the support in which the hob is to be fitted, as well as the edges of furniture, the laminate coatings and the glue used to fix them, must be able to resist temperatures of up to 100°C.
• The wall or splashback behind the hob must be heat-resisting.
• Not to install the hob to the top of a not ventilated oven or a
• There must be a space of 20mm beneath the bottom of the hob casing to ensure a good air circulation of the electronic device. (See page 21 for full ventilation information).
• If a drawer is placed under the worktop, avoid placing flammable objects (for example: sprays) or not heat-resistant objects

Materials which are often used to make worktops, expand on contact with water. To protect the cut-out edge, apply a coat of varnish or special sealant. Particular care must be given to applying the adhesive joint supplied with the hob to prevent any leakage into the supporting furniture. This gasket guaranties a correct seal when used in conjunction with smooth work top surfaces

• The safety gap between the hob and the cooker hood placed above must respect the
  indications of the hood manufacturer. In case of absence of instructions, use a minimum
  distance of 600mm.
  After installation, make sure the connection cord is not being constrained e.g. by the
  drawer.
  WARNING : Only use hob guards designed by the manufacturer, indicated as suitable in
  the manufacturer’s instructions for the appliance, or those that have been incorporated into
  the appliance. The use of inappropriate guards can cause accidents

Ventilation requirements

To ensure adequate ventilation of your induction hob, please ensure the installation requirements shown in this diagram are followed.A 5mm gap at the front of the unit must be left, and a minimum 10mm gap must be cut out at the back of the cabinet to allow air to circulate.

A minimum distance of 20mm must be left between the underside of the hob and the appliance directly below. If a drawer is intalled below the hob, a minimum distance of 40mm must be left between the underside of the hob, and the contents of the drawer.

Over filling the drawer may effect the airflow. If the drawer is overfilled or the ventilation requirements not followed, this will void the guarantee

ELECTRICAL CONNECTION

• The installation of this appliance and the connection to the electrical network should only be carried out by a qualified
• When installing, make sure no part of the hob is under stress or
• Necessary Connection data is placed on the hob casing near the connection
• Connection to the mains must be made using an earthed plug or via an omnipolar circuit breaking device with a contact opening of at least
• The electrical circuit must be separated from the network by adapted devices, for example: circuit breakers, fuses or
• If the appliance is not fitted with an accessible plug, disconnecting means must be incorporated in the fixed installation, in accordance with the installation
• The inlet hose must be positioned so that it does not touch any of the hot parts of the hob or

Caution!

This appliance has only to be connected to a network 230 V~ 50/60 Hz. Always connect the Earth Wire.

Respect the connection diagram.

The connection box is located underneath at the back of the hob casing. To open the cover, use a medium screwdriver.

Mains| Connection| Cable diameter| Cable| Protection calibre
---|---|---|---|---
230V~ 50/60Hz| 1 Phase + N| 5 x 1,5 mm²| H 05 VV – F H 05 RR – F| 25 A
400V~ 50/60Hz| 2 Phases + N| 5 x 1,5 mm²| H 05 VV – F H 05 RR – F| 16 A

• calculated with the simultaneous factor following the standard EN 60 335-2-6

Connection of the hob

Setting up the configurations:

For the various kinds of connection, use the brass bridges which are in the box next the terminal. Monophase 230V~1P+N

Put the bridge between terminal 1 and 2.

Attach the earth to the terminal “earth”, the neutral N to terminal 4, the Phase L to one of the terminals 1 or 2.

Biphase        400V~2P+N

Attach the earth to the terminal “earth”, the neutral N to terminal 4, the Phase L1 to the terminal 1 and the Phase L2 to the terminal 2.

Caution!

Fequent loosening and screwing of the screws on the connection box risks damaging the efficiency of the tightness once screwed. It is therefore advisable to keep screwing and unscrewing to a minimum.

Ensure that the cables are correctly inserted and tightly screwed down.

4 weeks after installation, a check should be made to ensure the electrical cables are still connected tightly and tightened further if necessary.

Warning!

We cannot be held responsible for any incident resulting from incorrect connection or which could arise from the use of an appliance which has not been earthed or has been equipped with a faulty earth connection.

DEMO FUNCTION

1. Disconnect the hob from the electrical network
2. Connect the network and take into account that the configuration setting has to be made within a

maximum time of 2 minutes.

1. Do not switch ON the hob key ( 8 ).
2. Press the “Keep warm” key ( 1 ) and keep the finger on this
3. With another finger, press at the same time, one after the other, the following keys:

( 2 ) key : Front right ( 3 ) key : Rear right ( 4 ) key : Middle

( 5 ) key : Rear left

( 6 ) key : Front left

Every touch has to be pressed within 2 seconds maximum.

A double “BEEP” indicates that the procedure failed (time exceeded in the selection of the keys, wrong direction of selection …).

In this case the procedure must begin again to stage, D or A if necessary. Release the finger from “Keep warm” key ( 1 ).

1. [ C ] and [ 0 ] blinks alternately on the rear left display ( 5 ).
2. The configuration code displays on the front left display ( 6 ).
3. Select the rear left display ( 5 ).
4. Choose the adapted configuration with the “SLIDER” ( 7 ) , slide to the left to decrease and to the right to increase. Slide until [ C ] and [ 6 ] blink
5. Then select the front left display ( 6 ) ; choose the right configuration with the slider :

• corresponds to C 6/ 0 – Demo mode is deactivated
• corresponds to C 6/ 1 – Demo mode is activated

1. Validate this choice by pushing the On / Off key [ ] ( 8 ) for 3

A long “Beep” is perceptible, and the segments will move upwards after a few seconds. The hob is now ready to be used.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>