VITALPEAK VP-HB130 Heated Blanket Instruction Manual

Table of Contents

VITALPEAK-VP-HB130-Heated-Blanket-PRO

Read carefully enclOsed satety instructions.
To use the product properly, consult the latest version of the user’s manual available at www.vitalpeak.eu.
Never use the appliance folded and never cover the Controller
Never use damaged appliance (damaged power cable and other damages – broken heating material, etc)
Never repair broken appliance. Contact the producer or the shop where you purchased the appliance.
Do not break the product with sharp object or pin the appliance with them.
If the controller tlashes, it indicates it is not connected properly with the heating appliance. lurn the appliance off and check the connection of the controller with the heating appliance.
Use the appliance under continuous supervision and never leave it on unkept. The appliance should not be used by children or persons with reduced physical, sensory or mental capabilities, without the need for an adult responsible for their safety.
Do not use the appliance close to liquids that could spill out on the product. In such a case, immediately disconnect the appliance from the wall plug and clean it in accordance with the rules in the ‘”Cleaning and Maintenance” article and have it dry completely.

Check every part is connected properly
- the connection between the controller and the heating appliance is to be firm.
Connect the appliance in the wal plug.
Select desired heating mode and working time.
Working time 20 min., up to 30
working time 40 min., up to 32
working time 60 min., up to 34
working time 80 min., up to 36°
working time 100 min., up to 38°
working time 120 min., up to 40
working time 140 min., up to 42
working time 160 min, up to 44
working time 180 min., up to 46

The actual temperature is affected by the surroundings and can deviate by +/-5°C.
Program 0 indicates the appliance is off and not heating.
Programs 2-9 are for fast heating. Only level 1 is recommended for continuous use.

The appliance is equipped with the function of automatic switch off after defaulted working time or the settled working time.
If you want to use the appliance again, set the controller to the 0 position for 10 seconds, then SWitch the appliance on again. After you inish using the appliance, set the 0 position on the controller and unplug the appliance from the grid.

CAUTION! Always unplug the appliance from the grid before cleaning as there is the risk of electric shock.

Disconnect the controller from the heating appliance. The controller must never be exposed to humidity or water. Clean only the heating appliance.
Do not wash the heating appliance in the washing machine, spin-dry, dry in a dryer, wring, iron nor take it to the dry cleaners.
Clean the appliance with a damp cloth or a sponge.
The appliance may be hand washed but it reduces its lifetime.
Never dry the appliance by switching it on.
Use the appliance when it is completely dry.

Always have the appliance cooled down before storage. Otherwise it may get damaged.
Fold the heating appliance gently to avoid breaking. Never stack anything on the appliance when stored.
Handle the supply cable carefully. Do not break it or wrap around the appliance.
Store in cold, dry and safe environment out of reach of children.

Specifications