caple WD140BS Sense Warming Drawer Instruction Manual

: June 3, 2024
: caple

caple WD140BS Sense Warming Drawer

caple-WD140BS-Sense-Warming-Drawer-Product-Image

SAFETY INFORMATION

Read carefully all the instructions contained in this manual. It provides you with important information regarding the safe installation, use and maintenance of the appliance as well as useful advice for getting the best out of your warming drawer.
Keep this booklet in a safe place for future reference.

This appliance is compliant with current safety regulations.
This appliance is intended to be used in household and similar applications such as:
Staff kitchen areas in shops, offices and other working environments
Farm Houses
By clients in hotels, motels and other residential type environments
Bed and breakfast type environments
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

SAFETY WITH CHILDREN

This appliance can be used by children aged from 8 years and above.
Children less than 8 years of age should be kept away unless continuously supervised or they have been shown how to use it in a safe manner. Children must be able to understand and recognise the possible dangers caused by incorrect operation.
Children should be supervised in the vicinity of the drawer. Never allow children to play with the appliance.
Remember that children have very delicate skin which is more sensitive to heat. Therefore, do not allow children to play with the appliance.
Cleaning and user maintenance should not be carried out by children without supervision.
Materials used for packaging (nylon, staplers, Styrofoam etc) may cause harmful effects to children, they should be disposed of immediately.
Children can injure themselves on an open drawer. Do not let children sit on the open drawer, lean against it or swing on it.

TECHNICAL SAFETY

Maintenance and repair work must be made only by authorised Caple service technicians. Installation and repair work that is carried out by unauthorised technicians may endanger you.
While the drawer is under warranty, repairs should only be undertaken by a Caple authorised service technician.
Otherwise, the warranty will be invalidated.
It is dangerous to alter or modify the specifications of the appliance in any way. The requirements for this appliance are stated on the rating label.
Risk of injury due to electric shock. Any contact with live connections or tampering with the electrical or mechanical components of the drawer will endanger your safety and may lead to the appliance malfunctioning. Do not open the appliance housing under any circumstances.
To maintain the efficiency and safety of your appliance, we recommend you always use original spare parts and to call only our authorised Caple Service agents in case of need.
Multi-socket adapters and extension leads should not be used to connect the drawer to the mains electricity supply.
The electrical system of this appliance may be used safely only when it is correctly connected to an efficient earthing system in compliance with the safety standards currently in effect.

INSTALLATION WARNINGS

Prior to installation, ensure that the local distribution conditions (electricity voltage and frequency) and the requirements of the appliance are compatible.
During installation the appliance must be completely disconnected from the mains electricity supply.
Do not operate the appliance before it is fully installed.
The appliance must be installed by an authorised technician.
Caple is not responsible for any damage that may be caused by defective placement and installation by unauthorised persons.
When unpacking the appliance, make sure that it is not damaged during transportation.
In the case of any defect; do not use the appliance and contact your retailer or Caple Service immediately.
If the supply cord is damaged, it must be replaced by a Caple service technician or similarly qualified persons in order to prevent a hazard.
Make sure that the appliance is firmly secured to the cabinet.

DURING USE:

Improper use may nonetheless cause damage to persons and/or property.
The inside of the appliance can reach a temperature of up to 75˚C when the thermostat is set to the maximum position. When taking out hot dishes, use appropriate oven gloves as necessary. Do not let them get wet or damp. Heat transfers through damp and wet material more quickly with the risk of scalding or burning yourself.
If the on button is pressed, the drawer will start heating and there is the danger of burns.
Do not use the appliance to keep warm, re-heat or cook foods and beverages. Humidity from foods or beverages may cause problems for the appliance.
Do not lean or sit on the open drawer. The telescopic carriage may be damaged.
The maximum load of the drawer is 25kg.
Do not keep plastic or flammable objects in the appliance.
When the appliance it turned on, they may melt or catch fire.
Do not use the appliance to heat the room.
Never under any circumstances insert objects (e.g. screwdrivers, pointed objects, paper, etc.) through the slots in the protection grille of the heating element and fan.

CLEANING AND MAINTENANCE:

Always switch off the appliance from the mains isolating the electrical supply before any cleaning or maintenance.
Never use steam cleaners. They may cause short circuits and damage the appliance.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is marked according to the European Directive on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please contact your local council, your household waste disposal service or the retailer where you purchased the product.

WARRANTY

Your new appliance is covered by warranty. The warranty card is enclosed – if it is missing, you must provide the following information to your retailer in order to receive a replacement: date of purchase, model and serial number. Registration can also be completed online by visiting www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service together with proof of purchase.
If you fail to show your warranty card you will incur all repair charges.
Spare parts are only available from Caple Service and spare parts authorised centres.
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).
UKCA DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with all applicable legislation.

ELECTRICAL CONNECTION

CONTACT A QUALIFIED ELECTRICIAN FOR THE ELECTRICAL CONNECTION OF THIS PRODUCT
Before connecting the appliance to the electrical mains, ensure that the technical data (voltage: V and frequency: Hz ) indicated on the rating plate concur with those of the electrical mains.
This appliance has a 3amp fuse rating.
If in doubt, contact a qualified electrician.
If the plug is disconnected from the electrical power cord, a qualified electrician will be required to insert and connect the appliance. Contact a qualified technician who is knowledgeable of local standards and of any additional regulations issued by the local electric company, and who ensures that work is carried out in compliance with these standards.
IMPORTANT:
Check that the appliance is correctly connected to an approved earth wire to ensure electrical safely. If necessary, have the system checked by a qualified electrician. If the electrical outlet is no longer accessible after insertion, or if a fixed connection is to be made, the installer must provide a separation device for each pole.
Valid separation devices include switches with a contact opening of at least 3mm. Caple shall not be held liable for damage to individuals or property due to lack or interruption of the earth wire.
ATTENTION: EARTH CONNECTION IS REQUIRED BY LAW.
If the appliance is connected to the mains with an extension cord. Make sure that the extension cord and the connection are insulated against humidity.
Never open the covering of the appliance if you come into contact with wires that carry voltage or if you modify the electrical and mechanical structure of the appliance, it is possible that the appliance will malfunction during operation.

If installation, maintenance and repair work is not carried out correctly, there may be hazards for the user. Caple declines all liability for this type of personal injury or property damage. During the warranty period, repairs may be carried out by authorised service agents only. Otherwise, guarantee coverage will be void.
Installation, repair and cleaning work are to be carried out only with the machine disconnected from the electrical mains. The appliance is disconnected from the electrical mains in the following cases:

The main switch of the electrical system is off.
The safety switch is off.
The appliance is unplugged.

USEFUL INFORMATION

The appliance is designed exclusively for the heating of dishes which are suited for this purpose.
The appliance is equipped with a hot air system. A fan creates excellent distribution of warmth from the drawer heating element. Air circulation heats the dishes evenly and quickly. A protection grille prevents contact with the heating element and the fan. The base of the drawer is covered with anti-slip material to keep dishes from moving when it is opened or closed.

INSTALLATION

SAFETY INSTRUCTIONS FOR INSTALLATION

Before connecting the appliance to the electrical mains, compare the connection data (voltage and frequency) indicated on the rating plate with the data of the electrical mains.
The data must match, otherwise the appliance may be damaged.
If in doubt, contact a qualified technician.
Make sure that the electrical outlet is easily accessible even after the appliance has been inserted.
The warming drawer can only be inserted with other appliances with a maximum weight of 40 kg that are provided with adequate cooling ventilation.
For installation with combination appliances, follow the instruction and building in dimensions shown in the ‘Installation dimensions’ section.
Insertion and installation of this appliance may be performed by qualified personnel who ensure safe operating conditions.

INSERTION SPACE MEASUREMENTS

The dimensions of the housing are obtained from the size of the warmer drawer plus measurements of the appliance combined with it.

INSTALLATION INSTRUCTIONS

Install the warming drawer directly onto a shelf within the cabinet to support the appliance.
The combined appliance i.e. oven, is then positioned directly onto the warming drawer without the need for additional shelves.
Ensure the warming drawer is well centred and aligned in the cabinet.
Open the drawer and secure to the housing unit by inserting the 2 screws provided into the fixing holes.

USING FOR THE FIRST TIME

When using the appliance for the first time, clean it as follows:

Clean the surface with a soft cloth and then dry it.
Pre-heat the empty drawer for at least two hours. Turn the temperature knob to the maximum setting, in order to eliminate any residual grease, oil, or manufacturing resins which may cause unpleasant odours during heating.
Air out the room.
Upon completion of this operation, the appliance is ready to be used for the first time.

APPLIANCE CONTROLS

The control elements are the temperature knob and the luminous ON-OFF switch. With the switch pressed (position 1) the drawer is on, whereas when the switch is released (position 0) the drawer is off. These parts can be seen only when the drawer is open. When the drawer is closed, a control light located on the front of the appliance lets you see whether the drawer is on.

OPERATION

Push the drawer gently to open and then pull the drawer out fully
Place the dishes in the drawer
Select a temperature
Turn on the appliance; the switch will light up
Close the drawer gently
Turn off the appliance before removing the heated dishes

TEMPERATURE SELECTION
The temperature knob lets you select a temperature between approximately 30ºC and 75ºC. Turn the temperature knob clockwise only, until it reaches it’s stop position (MAX). Do not force it beyond this point, otherwise the thermostat will be damaged.
The temperature scale does not show absolute temperatures in ºC,but rather symbols that represent the best temperature for respective groups of dishes, i.e cups – approx.40ºC.
FOR CUPS OR GLASSES – APPROX 40ºC
When contained in glasses which are previously heated to this temperature, hot beverages do not cool so rapidly and the container can be touched without any problem.
PLATES/DISHES – APPROX.60ºC
Foods placed in these dishes will stay warm longer. Depending on personal sensitivity, the dishes can be touched without any danger. Use oven gloves if necessary.
MAX APPROX. 75ºC
For dishes.
The thermostat is set to the maximum temperature.
The containers can be touched with appropriate oven gloves.
HEATING TIMES
The time required to heat dishes, glasses and so on depends on several factors:

Material and thickness of the dishes
Amount of load
Arrangement of load
Temperature setting

For this reason it is not possible to provide absolute information.
It is advisable to determine the best settings for your needs based on practical experience.

LOAD CAPACITY

Load capacity depends on the size of the dishes.
The following examples are approximate.
Also remember that the drawer can sustain a maximum weight of 25kg.
This warming drawer is designed to hold 6 place settings.

OR A CHOICE OF :

Note: These examples are a guide only. The actual quantities may differ.

TROUBLESHOOTING

Repair of electrical appliances is to be carried out by qualified, authorised service agents only.
Improperly or incorrectly performed repairs may create further hazards for the safety of the user.
Various factors affect heating time, for example:
Material and thickness of dishes, size of load, arrangement of load, temperature setting. Optimal heating times for dishes are subjective. Therefore, it is advisable to determine them on a trial and error basis according to your own preferences.

TROUBLES	SOLUTION

If the dishes are not warm enough

| The appliance is on
The right temperature has been set
The heat outlets have been covered by large plates or bowls
The dishes have been heated for a sufficient period of time.

If the dishes do not get warm

| There is fan noise: the fan is working, but the heating element might be defective
If the fan is not working, it may be defective
The main switch of the electrical system is off.
The electrical power cord is unplugged or damaged
If the dishes overheat:| The temperature setting device may be defective
The on/off switch does not light up when the appliance is switched on:| The control light of the switch is defective

If the problem still persists, please contact Caple service for assistance:
T – 0117 938 7420
E – service@caple.co.uk

CARE AND MAINTENANCE

Cleaning operations are to be undertaken only when the appliance is disconnected from the electrical mains. The appliance is disconnected from the electrical mains in the following cases:

The mains switch of the electrical system is off.
The safety switch is off.
The appliance is unplugged.

When unplugging the appliance, do not pull on the cord. Take hold of the plug and remove.
Clean all surfaces with a soft sponge, a bit of detergent and lukewarm water. Then dry all surfaces with a soft cloth.
IMPORTANT:
The area of the grille for the protection of internal components and the area of the switch and thermostat must not be cleaned with water.
Any penetration of liquids or other substances into electrically live parts may cause failures or short circuits, creating hazards for the user.
The front of the appliance can easily scratch if mistreated.
The glass surface should be cleaned with a special non-abrasive product.
DO NOT USE:
Detergents that contain soda, acids or chloride, abrasive detergents (powder or cream) abrasive sponges (e.g.steel wool pads) or sponges that contain residual abrasive detergent.
ANTI-SLIP BOTTOM
The anti-slip bottom of the drawer can be hand-washed with warm water and a gentle detergent.
Dry thoroughly afterwards.
Put the anti-slip bottom back in the drawer only when it is completely dry.