caple MODED 451 Inset or Undermount Stainless Steel Drainer User Guide
- June 1, 2024
- caple
Table of Contents
caple MODED 451 Inset or Undermount Stainless Steel Drainer
Product Specifications
Dimensions
- The dimensions of the product are detailed in the following sections:
Overall Dimensions
- The overall size of the product is 490mm in width and 450mm in depth.
Inset Dimensions
- The inset portion has dimensions of 440mm by 400mm.
Corner Radius
- The corners of the product have a radius of 10mm (R10mm).
Drainer Hole Dimension
- The diameter of the drainer hole is 90mm (Ø90mm).
| Specifications Feature | Measurement |
|---|---|
| Drainer Depth | 25mm |
| Minimum Base Unit | 500mm |
| Inset Cut-Out Size | 424 x 474mm |
Additional Information
Note: For the cut-out shape template, visit the website at www.caple.co.uk.
FAQs
What is the overall size of the product?
The overall size is 490mm in width and 450mm in depth.
What are the dimensions of the inset portion?
The inset portion measures 440mm by 400mm.
What is the radius of the corners?
The product corners have a radius of 10mm R10mm.
What is the size of the drainer hole?
The drainer hole has a diameter of 90mm Ø90mm.
How deep is the drainer?
The drainer depth is 25mm.
What is the minimum base unit required for the product?
The minimum base unit required is 500mm.
What is the size required for the inset cut-out?
The required size for the inset cut-out is 424 x 474mm.
Where can I find the cut-out shape template?
The cut-out shape template can be found at www.caple.co.uk.
DIMENSIONS
- DRAINER DEPTH: 25MM
- MIN. BASE UNIT: 500MM
- INSET CUT-OUT SIZE: 424 X 474MM
- NOTE: For cut-out shape go to www.caple.co.uk for the template
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>