baby trend WK37XXXA Baby Walker Instruction Manual

Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.

*Toys may vary

WK37XXXA
Instruction Manual

WK37XXXA_2L_120221.1

WARNING

WARNING: Please read all instructions before assembly and use of the walker. Keep instructions for future use.
WARNING: Never leave child unattended. Always Keep child in view while in walker.
WARNING: Use only on flat surfaces free of objects that could cause the walker to tip over.
WARNING: To reduce chance of child slipping out of the seat, check that both feet of the child touch the floor. Never carry walker with the child in it, as the child may get hurt or slip out.
WARNING: To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fireplaces, etc.
WARNING-STAIR HAZARD:
Avoid serious injury or death, block stairs/steps securely before using walker.

• This walker is to be used only by infants, who are old enough to sit upright on their own and are ready to learn to walk (about 6 months old).
  DO NOT USE UNTIL BABY CAN SIT UP BY ITSELF.

• Discontinue using the walker when the child can walk unassisted, reaches 30 lb. in weight, or reaches 32 inches in height.

• DO NOT ADJUST TRAY HEIGHT WITH THE BABY IN THE WALKER.

• Periodically inspect seat pad plastic tabs to be sure they are secured in the body.
  DO NOT USE THE WALKER IF IT IS DAMAGED OR BROKEN. Discontinue using should any part become damaged. Please contact our customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.

• Clean the stoppers on walker base regularly to maintain stopping performance. To clean the seat pad, use only mild household soap and warm water with a sponge or cloth. DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.

PARTS

Check that you have all the parts for this model before assembling the stroller.

Front                               Rear

*Toy bar

Base                                  Seat

*Toys may vary

ASSEMBLY

IMPORTANT! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
IMPORTANT! Adult assembly is required.
IMPORTANT! Always check that the baby walker is locked in the open position before using.
ATTENTION: Carefully remove parts from box. Check that you have all the parts for this model before assembling the baby walker.

TO ASSEMBLE WALKER PARA

1)

• To open the baby walker raise the tray to the middle position (Fig. 1).

Fig. 1

2)

• The baby walker can be used for 3 different heights. Turn the safety button lengthwise and press the safety button until the mechanism is released. Adjust to the middle height (Fig. 2).

Fig. 2

3)

• Check that the safety button is turned horizontally to prevent the accidental release of the mechanism (Fig. 3).

Fig. 3

4)

• Connect the seat fabric by inserting the plastic button pins into the upper, larger openings. Then push them firmly downwards until they SNAP into position (Fig. 4a).
  NOTE: Push the pins from the top of the opening all the way down to the bottom.

• Locate the straps with plastic buckles on back of seat and corresponding slots on tray. Insert each strap into corresponding slot (Fig. 4b).

Fig. 4a                                  Fig. 4b

5)

• From the underside of tray pull each strap completely through each slot and pivot plastic buckle to lay flat against underside of tray (Fig. 5).

Fig. 5

6)

• Thread the end of the support strap through the loop on the seat bottom and then through the slot at the end of the height adjustment bracket found under the tray (Fig. 6).

Fig. 6

7)

• Next thread the support strap through the opening in the rectangular ring and pull snug (Fig. 7).

Fig. 7

TO REMOVE THE SEAT FABRIC

8)

• To remove the seat fabric reverse steps 6 and 7 first followed by the reversal of steps 4 and 5.

9)

• Place walker on a solid flat surface with bottom of base facing upward. Insert the pins of the front wheels into their housing, pressing them until they snap into position. Please check that wheels are locked into place before proceeding (Fig. 9).

Fig. 9

10)

• Align the large tab on the rear wheel into the slot in the wheel housing of the walker (Fig. 10a). Press the wheel in until it stops against the three small tabs that prevent it from moving further (Fig. 10b). Repeat the process for the second rear wheel. Please check that all wheels are fully inserted into place before proceeding.

Fig. 10a                                           Fig. 10b

11)

• To attach the toy bar, clip the hooks on both sides of the toy bar to the walker tray (Fig. 11). Do not use the toy bar if it has been damaged or broken.

Fig. 11

TO FOLD WALKER

12)

• To fold the walker, turn the button to unlock and push it to release. Then push the tray downward to the lowest position (Fig. 12).

Fig. 12

PLACING CHILD IN THE WALKER

WARNING: To reduce chance of child slipping out of the seat, check that both feet of the child touch the floor. Never carry walker with the child in it, as the child may get hurt of slip out.

• Always check the walker prior to each use to ensure that the seat is snapped in place and that the walker has no loose or broken parts. Do Not use the walker if it is damaged or broken or missing parts.
• Before placing your child in the walker, please determine that your child is developmentally ready for this type of product. Generally, your child must be able to sit upright unassisted and have adequate neck strength to exhibit very good control of his or her head. Typically, a child should be at least 6 months of age to use this product. Infants develop at different rates and you should discuss the use of a walker with your pediatrician to ensure that your infant is ready.
• Adjust the seat height of the walker to the lowest setting. Place your child in the walker and check that both feet touch the floor. The child should have only part of their weight on their feet when their legs are straight. Adjust the walker height as needed as your child grows. Do not adjust height with child in the walker. Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted.
• The baby walker can be used for 3 different heights. To adjust height, remove baby from walker. Turn the safety button lengthwise and press the safety button until the mechanism is released. Adjust to desired height.
• When the position has been selected, check that the safety button turned through 90 degrees to prevent the accidental release of the mechanism. Always follow this procedure. Never use the baby walker if the button is not in the sideways position. Important: Never change the height when the baby is in the walker.

BABY TREND® CUSTOMER SERVICE

The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m – 4:30 p.m (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

Copyright © 2022, Baby Trend Inc., All Rights Reserved.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

Baby Trend, Inc. 1-800-328-7363
13048 Valley Blvd.                (8:00am ~ 4:30pm PST)
Fontana CA 92335www.babytrend.com

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>