baby trend WK14XXXA Trend 2.0 Activity Walker Instruction Manual

baby trend WK14XXXA Trend 2.0 Activity Walker

WARNING

• WARNING: Please read all instructions before assembly and use of the walker. Keep instructions for future use.

• WARNING: Never leave child unattended. Always keep child in view while in walker.

• WARNING: Use only on flat surfaces free of objects that could cause the walker to tip over.

• WARNING: To reduce chance of child slipping out of the seat, check that both feet of the child touch the floor. Never carry walker with the child in it, as the child may get hurt or slip out.

• WARNING: To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fireplaces, etc.

• WARNING-STAIR HAZARD: Avoid serious injury or death, block stairs/steps securely before using walker.

• This walker is to be used only by infants, who are old enough to sit upright on their own and are ready to learn to walk (about 6 months old).

• DO NOT USE UNTIL BABY CAN SIT UP BY ITSELF.
  Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted..

• DO NOT ADJUST TRAY HEIGHT WITH THE BABY IN THE WALKER.
  Periodically inspect seat pad plastic tabs to be sure they are secured in the body.

• DO NOT USE THE WALKER IF IT IS DAMAGED OR BROKEN.

  • Discontinue use should any part become damaged. Please contact our customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.
  • Clean the stoppers on walker base regularly to maintain stopping performance. To clean the seat pad, use only mild household soap and warm water with a sponge or cloth.

• DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.

PARTS

ASSEMBLY

• IMPORTANT! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
• IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
• IMPORTANT! Adult assembly is required.
• IMPORTANT! Always check that the baby walker is locked in the open position before using.

ATTENTION: Carefully remove parts from box. Check that you have all the parts for this model before assembling the baby walker.

TO ASSEMBLE WALKER

1. To open the baby walker raise the tray to the middle position (Fig. 1).

2. The baby walker can be used for different heights. Turn the safety button and slide vertically to adjust the height. See the 3 heights diagram under the walker for indications of the height being used (Fig. 2).

3. Check that the safety button is turned 90 degrees to prevent the accidental release of the mechanism (Fig. 3).

4. Attach the fabric nearest to the tray,push the pins downward through the fabric into to the holes of the frame until its snaps into place. Repeat for the opposite side (Fig. 4a).
   NOTE: All pins should be aligned to the corresponding holes of the frame and click into place to ensure the fabric is securely attached.

   • Once all pins are correctly set into position, the seat padding should create a secured backrest (Fig. 4d). NOTE: To avoid tearing Do Not lift the walker from the seat padding.

5. Place walker on a solid flat surface with bottom of base facing upward. Insert the pins of the wheels into their housing by pressing them until they snap into position (Fig. 5a).
   • Insert the pins of the 6 stoppers and 2 rear wheels into their housing by pressing them until they snap into position (Fig.5b). Ensure to apply enough pressure when inserting the stoppers so that they push in lower than the level of all the wheels (Fig.5c). Please check that wheels are locked into place before proceeding.

THE TOY BAR

6. Before attaching the toy bar, ensure that the open slots on the base of the toy bar are rotated to the outermost direction (Fig. 6a) – (Fig. 6b)

  * To insert the toy bar, always position yourself in the front of the walker. Align the openings to the plastic knob, push the plastic knob into the bar and rotate counter-clockwise to lock into position (Fig. 7a).

7. After inserting the toy bar slots into the tray knobs, ensure both knobs are turned completely to securely lock it into the tray (Fig. 7a). Do not use the the toy bar if it has been damaged or broken.
   • To remove the toy bar: Twist the knobs clockwise or hold the knob and twist the base of the toy bar counter-clockwise (Fig. 7b).

TO FOLD WALKER

8. To fold the walker, turn the button to unlock and push it to release. Then push the tray downward to the lowest position (Fig. 8).

TO REMOVE SEAT

9. Lift the front plastic pins of the seat upwards and pull the pins out of the holes. (Fig. 9a).
   Squeeze and release the straps with plastic buckles on back of seat from their corresponding slots underneath the tray (Fig 9b).

OPERATION

PLACING CHILD IN THE WALKER

WARNING: To reduce chance of child slipping out of the seat, check that both feet of the child touch the floor. Never carry walker with the child in it, as the child may get hurt of slip out.

• Always check the walker prior to each use to ensure that the seat is snapped in place and that the walker has no loose or broken parts. Do Not use the walker if it is damaged or broken or missing parts.
• Before placing your child in the walker, please determine that your child is developmentally ready for this type of product. Generally, your child must be able to sit upright unassisted and have adequate neck strength to exhibit very good control of his or her head. Typically, a child should be at least 6 months of age to use this product. Infants develop at different rates and you should discuss the use of a walker with your pediatrician to ensure that your infant is ready.
• Adjust the seat height of the walker to the lowest setting. Place your child in the walker and check that both feet touch the floor. The child should have only part of their weight on their feet when their legs are straight. Adjust the walker height as needed as your child grows. Do not adjust height with child in the walker. Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted.
• The baby walker can be used for 3 different heights. To adjust height, remove baby from walker. Turn the safety button lengthwise and press the safety button until the mechanism is released. Adjust to desired height.
• When the position has been selected, check that the safety button turned through 90 degrees to prevent the accidental release of the mechanism. Always follow this procedure. Never use the baby walker if the button is not in the sideways position. Important: Never change the height when the baby is in the walker.

BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between
8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT
BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.
Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

• Baby TBaby Trend, Inc.rend, Inc.
• 1607 S. Campus 13048 Valley Blvd. A ve., Ontario, CAFontana CA 92335 91761
• 1-800-328-7363 1-800-328-7363
• (8:00am ~ 4:30pm PST)(8:00am ~ 4:30pm PST)
• www.babytrend.com

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>