WOLFVISION Security Pack Lock System Instructions
- June 5, 2024
- WOLFVISION
Table of Contents
WOLFVISION Security Pack Lock System
Introduction
Selected WolNision Visualizers and cameras are offering the possibility to enhance security by using an optional Feature Pack which disables some functions. This upgrade is activated by loading a valid Feature Pack code.
Currently available add-on features of Security Pack Pack are
- Snapshot disabled
- Recording disabled
- Freeze function disabled
- Firmware downgrade to versions without Security Pack disabled
Additional features may be added in the future with later firmware versions. Depending on unit, certain features be not available in the standard specification. “Function blocked due to enabled Security FP!”will be displayed when trying to use a disabled function. Where you can get the Code to activate the Security Pack The Security Pack code is a unique number and it depends on the serial number of the Visualizer. The code can be supplied by your dealer (together with the Visualizer or separately). Any questions regarding Feature Pack code availability, please contact either your dealer or WolNision directly (contact details on the last page of this manual).
Important note:
The Security Pack is not pre-installed and user activation is required! Enable
the Security Pack by using one of the two following methods:
- Connect a pre-prepared USB stick to the Visualizer and follow the on-screen instructions
- Use the software vSolution Link by WolNision, selecting the Administration tab, and then clicking on
Online/OfflineActivation.
Please note that the latest firmware has to be installed on the Visualizer!
Using the prepared USB-Stick
- Connect a power source and a monitor to the Visualizer then switch on the Visualizer
- Plug in the USB stick.
- A pop-up message will ask if you want to enable the features.
- Use the navigation keys on the camera head (or remote control) to confirm the line ”YES”.
Using the software vSolution Link by WolfVision
- Install the software vSolution Link by WolNision onto your computer – be sure to install administration functionality.
- Connect a power source and your PC via USB or LAN to the Visualizer and start the Software.
- Select the ribbon “Administration” and click on either Online or Offline activation:
- Online activation requires an internet connection for the software Offline activation requires the activation file or at least the activation code.
For more details please consult the help section of the software vSolution Link by WolfVision. Please note that older versions of the software may not support Feature Pack activation. Latest version can be downloaded from:www.wolfvision.com (Support).
Copyright Information
- Copyright© by WolNision. All rights reserved.
- WolNision, Wofu Vision and ff;. 1’& t_ll\ ill are registered trademarks ofWolNision HoldingAG,Austria.
- No part of this document may be copied, reproduced, or transmitted by any means, without prior written permission from WolNision. Except documentation kept by the purchaser for backup purposes.
- In the interest of continuing product improvement, WolNision reserves the right to change product specifications without notice.
- Information in this document may change without notice.
- Disclaimer: WolNision shall not be liable for technical or editorial errors or omissions.
- The units are “MADE IN EU/AUSTRIA”
- Printed in Austria, February 2016