MIXX StreamBuds Blend 2 Wireless Earbuds User Guide
- June 12, 2024
- MIXX
Table of Contents
MIXX StreamBuds Blend 2 Wireless Earbuds
Product Information
Quick Start Guide:
This product comes with a quick start guide in multiple languages,
including English, German, Dutch, Italian, Danish, and Finnish.
Portable Charging Case:
The portable charging case is used to charge the earbuds. It can be
connected to a USB wall charger, computer USB port, or power bank using the
provided USB C charging cable. When charging, the charge light indicator will
blink red to indicate the case is charging.
15-Minute Quick Charge:
If the earbuds are running low on power, they can be charged in the case
for 15 minutes to get an additional 2 hours of play time while on the go.
Connecting the Earbuds:
To connect the earbuds for the first time, follow the pairing instructions
provided in the user manual.
Activating Siri or Google Assistant:
To activate Siri or Google Assistant, triple tap either Touch Sensor [1] or
[3]. You will hear a familiar beep sound to confirm the connection. Once
connected, you can ask Siri or Google Assistant a question or give a command.
Product Recycling:
This product can be recycled. Please do not throw it away with normal
household waste. Instead, take it to a designated collection point for
recycling electronic devices. Contact your local authority for more
information on return and collection points.
Safety Precautions:
- Consult with your doctor before using the product if you have a medical device such as a pacemaker or programmable shunt.
- Ensure the product is correctly connected using the manufacturer’s original accessories included with the product.
- Do not make unauthorized alterations to the product.
- Keep the product out of reach from children under 6 and animals as it may contain small parts that can be a choking hazard.
- Skin irritation may occur after prolonged use, even though the product is made using hypo-allergenic materials.
- Avoid listening to loud music for a long duration to prevent hearing damage. Lower the volume before placing the device in your ears.
- Clean the product and charging case with a dry cloth. Wipe off sweat before charging.
- Use only the provided cable to charge the device. Do not use a non-certified PD or QC3 wall charger as it may damage the product.
- If the product is damaged, does not operate normally, or has been dropped, consult a qualified person before continuing to use it.
- Warning: This product contains a Lithium battery. Improper disposal of the battery may result in an explosion.
- Avoid exposing the product, charging case, and cable connectors to prolonged rain, moisture, or liquid spills/splashing.
- Do not use the product while operating machinery or in areas where hearing is required for safety, such as riding a bicycle, at a construction site, or near a railroad.
QUICK START GUIDE
Note : If your earbuds and charge case do not have any power when you first unpack them, place the earbuds into the charge case and plug the charge case into a USB port using the USB C cable provided.
The Earbuds
- A voice prompt “Battery low” allows for 2 minutes of play time before the earbud(s) powers down stating “Battery low, power off”. The Earbuds LED Light [22] will flash WHITE once and will then switch off. Charge the earbuds using the Portable Charging Case [5] .
- While charging, each Earbud LED Light [22] will be WHITE, and once fully charged the LED Lights will turn off. Secure the earbuds by closing the lid.
- When the earbuds are placed inside the case and the lid is closed, the charge indicator light (7) will glow WHITE for 4 seconds to indicate charging and then turn off.
TIP : 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your earbuds in the case for 15 minutes
and get 2 hours extra play time while on the go
The Portable Charging Case
- Always connect the case via the USB C port [6] , to a suitable USB wall charger, computer USB port or a power bank using the USB C charging cable (8) supplied.
- Plug the supplied cable into the USB C port [6] on the charge case.
- The charge light indicator (7) will blink RED, on and off, to show the case is charging.
LET’S CONNECT
First time pairing
- Remove both earbuds from the Portable Charging Case [5] .
- They will automatically dual pair together; a voice will prompt“Power on, pairing” and a ‘Beep’ will sound. One of the Earbud LED Lights [2] will flash WHITE to indicate pairing mode. If the earbuds do not automatically dual pair together, tap each Touch Sensor [1] and [3] 4 times to power off and then place them both back into the case. Remove the earbuds and they should automatically dual pair together.
- Go to the Bluetooth settings on your audio device and select ‘MIXXStreambuds Blend 2’ from the list. Once paired successfully you will hear “Connected” and the Earbud LED Light [2] will turn off.
- You can now enjoy your music, watch a video or take a call hands-free. The earbuds will automatically reconnect to the last device they were paired with, confirming “Connected”.
- Placing both earbuds back in the Portable Charging Case (5) will power them off. (note – if the earbuds do not turn off, the battery in your charging case needs to be recharged – see ‘Let’s Stay Charged.’
LET’S PLAY
Power on
- Remove both earbuds from the case. They will automatically turn on and dual pair together. A voice prompt will state “Connected” as confirmation. To manually turn it on, long press each Touch Sensor and [1] for 3 seconds
Power off
- Place both earbuds in the case. This will automatically turn off the earbuds and the Bluetooth.
Play / Pause
- Double tap either Touch Sensor [1] or [3]
Increase Volume
- Single tap RIGHT Touch Sensor [3]
Decrease Volume
- Single tap LEFT Touch Sensor [1]
Previous Track
- Tap and hold LEFT Touch Sensor [1]
Skip Track
- Tap and hold RIGHT Touch Sensor [3]
Answer / End Call
- Double tap either Touch Sensor [1] or [3] .
- (Audio is picked up via the microphones [4] .)
LET’S ASK GOOGLE ASSISTANT / SIRI
Triple tap either Touch Sensor [1] or [3] to activate Siri or Google
Assistant.
Your Voice Assist familiar ‘Beep’ will sound to confirm the connection. You
can now ask Siri or Google Assistant a question or state a command
LET’S RECYCLE
- This product can be recycled.
- Products bearing this symbol must NOT be thrown away with normal household waste.
- Take the product to a collection point designated for recycling of electronic devices.
- Find out more about return and collection points through your local authority.
LET’S BE SAFE
IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.
For your protection
- Check with your doctor before use if you are fitted with a medical device such as a pacemaker or a programmable shunt.
- Ensure the product is correctly connected using the manufacturer’s original accessories included with the product.
- Do NOT make unauthorized alterations to this product.
- The product may contain small parts which can be a choking hazard. Please keep the product out of reach of children under 6 and animals.
- Whilst this product has been made using hypo-allergenic materials, you may suffer some skin irritation after prolonged use.
- Do NOT listen to loud music for a long duration of time. We recommend turning the volume down before placing the device in your ears to avoid hearing damage.
- Do NOT use the product while operating machinery, including cars, trucks or other vehicles.
- Do NOT use noise canceling mode or use your device in areas where the use of hearing is required for safety. e.g., while riding a bicycle, at a construction site or railroad, etc
- Clean only with a dry cloth – Wipe off sweat from the earbuds and the charging case before charging.
IMPORTANT!
- Do NOT use a non-certified PD or QC3 wall charger as this may damage the product. Only use the cable supplied to charge your device.
- If your product has become damaged in any way, does not operate normally or has been dropped, please refer to a qualified person to have the product checked before continuing to use it.
WARNING:
- This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.
- The operating temperature range for this product is 5º – 40º Celsius.
- Please avoid exposing the product, charging case, and cable connectors to prolonged rain, moisture, or liquid spills/splashing.
- Please remove your device from your ears immediately if they emit any loud unusual noise or you experience a warming sensation.
If you experience any of the issues listed above, please turn off your device and contact MIXX Ltd on support@mixx-io.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>