Oilsky X50 Clip MP3 Player with Bluetooth 5.0 User Manual

USER MANUAL
X50 Clip Mp3 Player

Instruction of Buttons

Charge the Player

1. Use 5V=1A Charger
   Use only the 5V=1A charger for charging or it may lead to product failure. After fully charged, disconnect the cable from your device by pulling it straight outward.

2. Charge by Computer
   Connect the device to a running computer via the included charging cable.
   Note: If not used for a long time, you are supposed to charge the battery at least once every 2 months.

Quick Guide

Power on, off
Slide the power button to the right to turn on the player. Push it back to turn it off.
Return
While on playing interface, press the button to exit.
Volume Adjustment
Click the button +/- on the right side to increase/decrease the volume.
Data Transfer
Using the supplied charging cable, connect your computer and copy over media files as if it was a flash driver or use music management software such as Windows Media Player to transfer the files (not work for iTunes).

Main Functions

Music

Press the button with “Music” on main interface to access its function, then press button to choose each functions including All songs, Now Playing /Last played, Artists, Albums, Genres, Playlists, and Update Playlist.

1. 0perations on music playing interface
   Icon| Operation| Function
   ---|---|---
   | Press the button| Get into the sub-menu, and select & set each function you preferred
   | Press the button| Return to previous menu
   | Press the button| No function on this interface
   | Press the button| No function on this interface
   | Press the button| Pause/Play the music
   | Press the button| Play the Previous song
   | Press the button| Play the Next song
   | Hold the button| Rewind the current playing song
   | Hold the button| Fast forward the current playing song
2. Music format
   Music format| Music format| Sampling Rate
   ---|---|---
   MP3| MP3| 8MHz-48MHz
   WAV| WAV| 8MHz-48MHz
   FLAG| FLAG| 8MHz-48MHz
   APE| APE| 8MHz-48MHz
   OGG| OGG| 8KHz-48KHz

Steps to set A-B Repeat mode:

1. On the music playing interface, press the button > Select Play mode> Repeat settings> Repeat mode. Letter A now starts flashing on the right side of the screen.
2. Press the button to choose the start position, now letter B starts flashing, press the button and letter B stop flashing. Now AB repeat mode set successfully. And the player will only play the sound you just set until you press the button again to cancel the repeat mode and resume normal playback.

Attention:

1. ONLY 4000 music tracks can be displayed in the music lists, please go to the folders to find the complete tracks.
2. If your computer cannot detect the MP3 Player, please update your USB driver to 2.0 version or try another cable. If still won’t work please get in touch with Oilsky Technical Support for help. (See cover)
3. To better sort your music or audio we recommend you create some folders on your PC/Mac to sort them instead of the 3 default playlists. After it’s done. Play music from ” Folder “.

► Bluetooth

How to pair X50 with Bluetooth speaker or Bluetooth headset?

1. Turn on the Bluetooth speaker or Bluetooth headset and open the Bluetooth mode.
2. Turn on the Bluetooth mode of X50, searching for the Bluetooth device around.
3. After successful search, Go “Device List” to choose the Bluetooth device to pair with your Bluetooth speaker or Bluetooth headset.

Attention:

1. X50 Cannot pair with Smartphone and PC via Bluetooth
2. If you have connected your Bluetooth earphone with your mobile phone , please disconnect them before pairing with the X50, or the connection would be a failure.
3. When listen to radio by Bluetooth, wired headphones are needed as radio antenna.

► FM Radio
Press the button with ” FM radio ” on main interface to access to the radio playing interface, press to its sub menu:

Steps to start FM radio recording:

1. On the radio playing interface, press the button to choose ” Start FM radio recording, press the button enter to the recording interface, press the button to confirm whether to save the recording and exit.
2. Press the button and choose “FM recording file” to select each file to play as you wish.

Steps to select different FM band:

On the radio playing interface, press the button and choose ” Tuner Region ” to set each FM band as you wish:
Common Band: 87.0 MHZ – 108.0 MHZ
European Band: 87.0 MHZ – 108.0 MHZ
Japan Band: 76 MHZ – 90 MHZ

Attention:

1. Wired headphones are required as antenna for FM radio function.
2. Plug in wired headphones when play FM radio in Bluetooth Mode.

► Recorder
Press the button with “Recorder” on the main interface, and press button to select each function.

1. Record format & bitrate
   Record format| Mp3, WAV
   ---|---
   Record bitrate| 512kbps
   768kbps
   1024kbps
   1536kbps
   3072kbps
2. How to record from Line-in?
   1. Connect the mp3 player with your smartphone or audio device with a 3.5mm AUX cable
   2. Select Recorder > Record from > Line in
   3. Press the button to go back, then select Start voice recording
   4. After saved the file, you can play it from Recording library.

> E-book
Press the button Cl with “EBook” on the main interface and your ebook will list here, on the reading interface press the button IE! to select each function.
Set the Auto Page Turn Time:
You can set how often to turn page, time ranging from 2 to 30 seconds. Once setting is done, the device automatically turn pages according to the time you set.
Note : TXT Format supported only.

►Video

1. Only supports formats: AMV & AVI with resolution: 128*128
2. Convert video by video conversion tool. Contact Oilsky service to get it if needed.

> Settings
Press the button with “Settings” on the main interface, choose or set each function here. Points need to know below:
Sleep timer:
1 to 99 Minutes: Regardless of whether it is operated or not, the machine auto- shutdown when the time reaches the specified time you set. Press the button to save the setting.
Power management:
1 to 99 Minutes: No music being played, the machine automatically shut down when there is no operation in the time you set. Press the button to save the setting.
Date and time:
Time settings: Set the time format you want (12-hours / 24-hours). Press the button to save the settings.
Date settings: Set the date format you want ( MM DD YYYY) etc. Press the button Cl to save the settings.
Format device:
Before you choose to format the device, please remember to back up all your files, otherwise, you will no longer get them back.
► Folder
MP3 and micro SD card’s memory will be sorted by edit time, the first file be dropped in will be listed at the top.
If you renamed the file or do some other modifications, the file goes to the bottom of the list. This trick only works for “Folder” , not “Music”.

Ways to sort audio in alphabetic order.

1. Prepare you audio book files on PC/MAC.
2. Make sure these files are in correct order by file name. Such as “01 xxx”, “02 xxx” .. “50 xxx”.
3. Now plug in your mp3 player and ready to transfer.
4. Create a folder in mp3 player and name it as you wish.
5. Select all audio files and do not copy or cut.(lmportant)
6. When all files are being selected, move your mouse above the first audio file (ie “01 xxx”) and then right click and copy. (Important)
7. Paste these files to your mp3 player folder, make sure all files are pasted in right order. Otherwise delete them all and redo step 5.
8. unplug the mp3 player, and go to the folder with files, they should be in correct order.

Additional Functions

Stopwatch, Pictures, Calendar, Pedometer

Q: How to transfer music to the mp3 player?

A: Download music to your computer first, and then connect mp3 player with your computer thru charging cable. A new disk will pop on as flash driver, and drop all your musics to the disk. You can create folders in the disk to sort your music.

Q: Why my computer can't recognize the MP3 player?

A: Oilsky Mp3 Player can be paired with latest USB driver for all computer system. Please update your USB driver to 2.0 version before connecting the MP3 player or try another charging cable. If you still cannot connect the player to your computer, please contact Oilsky customer service for further help (see cover).

Q: How to insert the SD card into the card slot successfully?

Q: Where to get the USB 2.0 version driver?

A: If your computer can't recognize the mp3, you need to update your USB driver to 2.0 version. You can contact Oilsky technical support if needed. (see cover)

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>